ABSTRACT
The high-accuracy alignment of magnets is a key issue in the development of next-generation light-source rings. To obtain adequate dynamic apertures, the magnets must be aligned to an accuracy of 10 µm or better. Recently, a new technique that utilizes a vibrating wire has attracted attention for this purpose as it can directly determine with high resolution the magnetic centers in a series of multipole magnets on a straight section between bending magnets. In conventional vibrating-wire alignment techniques, wire sag, which causes alignment errors, is determined from the theoretical catenary curve. By contrast, in the present study, we have measured the sag profiles of various wires in the longitudinal direction to micrometer-order accuracy. We concluded that we can reduce deviations of the actual wire sag from the theoretical curve by choosing a suitable wire. By setting up a test bench of a vibrating-wire alignment system for a series of multipole magnet on a straight section, we have achieved the total error of the magnetic-center measurements of micrometer-order in the standard deviation. Moreover, two systematic error factors, the drift of the magnetic centers due to thermal deformations of the magnets after they are excited and the change in the magnetic centers due to reassembly of the magnets after installing the vacuum chamber, are included in practical magnet alignments. We have experimentally investigated these error factors using the test bench.
