Multifunctional free-standing single-walled carbon nanotube films.

We report a simple and rapid method to prepare multifunctional free-standing single-walled carbon nanotube (SWCNT) films with variable thicknesses ranging from a submonolayer to a few micrometers having outstanding properties for a broad range of exceptionally performing devices. We have fabricated state-of-the-art key components from the same single component multifunctional SWCNT material for several high-impact application areas: high efficiency nanoparticle filters with a figure of merit of 147 Pa(-1), transparent and conductive electrodes with a sheet resistance of 84 Ω/◻ and a transmittance of 90%, electrochemical sensors with extremely low detection limits below 100 nM, and polymer-free saturable absorbers for ultrafast femtosecond lasers. Furthermore, the films are demonstrated as the main components in gas flowmeters, gas heaters, and transparent thermoacoustic loudspeakers.

Dispersion compensation technologies for femtosecond fiber system.

Developed highly chirped broadband fiber Bragg gratings and suspended-core fibers are shown to offer flexible dispersion management and allow for femtosecond oscillators with transform-limited pulse quality. Such dispersion compensators could have potential, particularly for all-fiber chirped-pulse amplification systems.

Pulse dynamics of a passively mode-locked Bi-doped fiber laser.

The pulse evolution in Bi-doped soliton fiber laser with slow and fast saturable absorber has been studied both experimentally and numerically. Semiconductor saturable absorbers with balanced slow and fast absorption recovery mechanisms exhibit a bi-temporal recovery dynamics which permits both reliable start-up of passive mode-locking and short pulse generation and stabilization. The pulse dynamics within the Bi fiber laser cavity have been investigated.

Carbon nanotube films for ultrafast broadband technology.

Mode-locked sub-picosecond operation of Yb-, Er- and Tm:Hodoped fiber lasers operating at 1.05 microm, 1.56 microm and 1.99 microm, respectively, is demonstrated using the same sample carbon nanotube-based saturable absorber mirror. A mesh of single-walled carbon nanotubes was deposited on an Ag-mirror using a one-step dry-transfer contact press method to combine broadband saturable absorption and high reflectance properties. The novel fabrication method of the polymer-free absorber and device parameters determined using nonlinear reflectivity measurement are described in detail. To our knowledge the observed operation bandwidth of approximately 1 microm is the broadest reported to date for a single carbon nanotube-based saturable absorber.

Passively Q-switched Tm3+, Ho3+-doped silica fiber laser using a highly nonlinear saturable absorber and dynamic gain pulse compression.

We demonstrate a compact core-pumped 2 microm Tm(3+), Ho(3+)- doped all-fiber laser passively Q-switched with an antimony-based saturable absorber. The 20 ns pulses are the shortest Q-switched pulses from a fiber laser operating beyond 1850 nm and were produced at a repetition rate of 57 kHz and pulse energy of 15 microJ using a short-length (4 ns) cavity. The large absorber modulation depth of approximately 70% together with transient gain compression is shown to provide an efficient mechanism for Q-switched pulse shortening.

Dynamic gain induced pulse shortening in Q-switched lasers.

We describe a novel mechanism of pulse shortening in a Q-switched laser induced by the gain compression effect under strong pumping conditions. The pulse shortening requires a large variation of the gain excursion during the saturation process and benefits from the large volume of the gain medium. The effect has been experimentally demonstrated using a passive Q-switched Tm/Ho-doped fiber laser that shows gain-induced pulse compression from 800 ns down to 160 ns when the pump threshold is exceeded by 15 times.

Fiber taper for dispersion management in a mode-locked ytterbium fiber laser.

We exploit the large anomalous dispersion in the waist of a fiber taper to offset the intracavity normal chromatic dispersion of an Yb-doped fiber laser. The fiber taper provides sufficient anomalous dispersion to ensure soliton operation of the mode-locked laser. With the taper removed from the cavity, the laser operates in a net normal dispersion regime.

Red-green-blue (RGB) light generator using tapered fiber pumped with a frequency-doubled Yb-fiber laser.

We report on successful realization of a picosecond visible-continuum source embedding a single mode fiber taper. The output of ytterbium mode-locked fiber laser was frequency doubled in a periodically-polled lithium niobate (PPLN) crystal to produce green pump light. Spectral brightness of the white light generated in the tapered fiber was improved by limiting the broadening just to the visible wavelengths. The influence of taper parameters, particularly the dispersion, on white light spectrum has been studied.