ABSTRACT
In this Letter, a completely ferrodielectric metasurface consisting of an array of cylinders on a substrate is studied. All structural elements are made of ferrodielectric material. The conditions for the excitation of Wood's anomaly mode, obtained for different geometric parameters of the metasurface, are revealed. By continuously changing the structure parameters, we can change the position of the resonance at the Wood anomaly, thereby setting the position of the resonance at the frequency we need. It is shown that there is a resonant increase in the polarization plane rotation of the transmitted waves at the corresponding resonant frequency of the lattice mode excitation. Such polarization rotation is demonstrated both experimentally and theoretically.
ABSTRACT
A novel method for fabrication of 2D and 3D metal nanoparticle structures and arrays is proposed. This technique is based on laser-induced transfer of molten metal nanodroplets from thin metal films. Metal nanoparticles are produced by solidification of these nanodroplets. The size of the transferred nanoparticles can be controllably changed in the range from 180 nm to 1500 nm. Several examples of complex 2D and 3D microstructures generated form gold nanoparticles are demonstrated.
Subject(s)
Gold/chemistry , Lasers , Metal Nanoparticles/chemistry , Nanotechnology/methods , Optics and Photonics , Equipment Design , Metals , Microscopy, Electron, Scanning/methods , Nanostructures , Normal Distribution , Particle SizeABSTRACT
Excitation, focusing and directing of surface plasmon polaritons (SPPs) with curved chains of nanoparticles located on a metal surface is investigated both experimentally and theoretically. We demonstrate that, by using a relatively narrow laser beam (at normal incidence) interacting only with a portion of a curved chain of nanoparticles, one can excite an SPP beam whose divergence and propagation direction are dictated by the incident light spot size and its position along the chain. It is also found that the SPP focusing regime is strongly influenced by the chain inter-particle distance. Extensive numerical simulations of the configuration investigated experimentally are carried out for a wide set of system parameters by making use of the Green's tensor formalism and dipole approximation. Comparison of numerical results with experimental data shows good agreement with respect to the observed features in SPP focusing and directing, providing the guidelines for a proper choice of the system parameters.
ABSTRACT
We have fabricated bandpass filters based on pi-shifted long-period gratings for application in actively mode-locked erbium fiber lasers. Introducing the pi-phase shift in the middle of the grating opens a bandpass within the core-cladding mode resonance peaks. With a 22-nm bandwidth filter inserted in an actively mode-locked erbium fiber sigma laser, solitonlike pulses are generated, with a power-dependent duration of approximately 3-5 ps , at a 3-GHz repetition rate. These all-fiber filters have the advantages of low insertion loss (<0.5 dB) and a wide bandwidth (10-20 nm), and they do not require that a circulator be inserted into the laser cavity.
ABSTRACT
We propose a technique for measuring both pulse width and amplitude jitter noises of high-repetition-rate optical pulse trains and the cross correlation between these noises as well. The technique is based on time-domain amplitude demodulation of three harmonic components of the detected pulse train. We applied this technique to characterize noises of a gigahertz optical pulse train generated by an actively mode-locked Er-doped fiber laser. Correlation between pulse width jitter and pulse amplitude jitter was observed at low frequencies in this laser. Unlike relaxation oscillation noise, low-frequency noise is free from pulse energy jitter. Owing to its ability to measure pulse width jitter in addition to amplitude and phase jitters, this technique is of great interest for characterizing noises of a wide variety of optical pulse train sources.
ABSTRACT
We demonstrate for the first time to our knowledge, experimentally and theoretically, that the pulse-to-pulse amplitude fluctuations that occur in pulse trains generated by actively mode-locked Er-doped fiber lasers in a repetition-rate-doubling rational-harmonic mode-locking regime are completely eliminated when the modulation frequency is properly tuned. Irregularity of the pulse position in the train was found to be the only drawback of this regime. One could reduce the irregularity to a value acceptable for applications by increasing the bandwidth of the optical filter installed in the laser cavity.
ABSTRACT
Stabilization of an actively mode-locked fiber laser in the frequency-doubling rational-harmonic mode-locking regime is demonstrated experimentally for the first time to the authors' knowledge. The stabilization is achieved by a method based on minimization of the average optical power at the second output of a dual-output Mach-Zehnder modulator used as a mode locker. This method produces long-term stable operation of the laser with ~35-dB suppression of the pulse-to-pulse amplitude fluctuation caused by rational-harmonic frequency doubling.
ABSTRACT
We observed an unusually narrow spectrum of Stokes field and Gaussian statistics of Stokes power for the stimulated Brillouin scattering (SBS) process in 300-m single-mode optical fiber with high Rayleigh losses. The measured characteristics of the Stokes radiation indicate that SBS lasing took place in the fiber. The effect is explained as the result of dynamic distributed feedback that is due to double Rayleigh scattering (RS) of the Stokes field. The results of numerical simulation of the cooperative SBS-RS process in fiber are in good agreement with experimental results.
