Evaluation of Topographical Co-Cr-Mo Alloy Surface Changes After Various Finishing Treatments.

PURPOSE: To quantify the influence of three different finishing treatments on the cobalt-chromium-molybdenum (Co-Cr-Mo) alloy surface based on stereometric analysis parameters. MATERIALS AND METHODS: Eighteen specimens were casted from an extra-hard alloy (Wironit®, BEGO, Bremen, Germany). The samples were distributed into three groups (n = 6 samples per group) dependent on different polishing techniques applied, as follows: A group, only electropolished (EP) samples; B group, after EP, an additional mechanical polishing process was applied to the surface by rubber discs and a polishing paste (RP); C group, after EP, an additional mechanical polishing process was completed by rubber discs, polishing paste and finally by a rotating deer leather wheel (RPDL). Samples were imaged by atomic force microscopy (AFM) in a contact mode, in air, at room temperature. RESULTS: The evaluation of the microtexture of the sample surface was made based on the 3-D roughness parameters. The lowest statistical surface roughness parameters were found in the RP samples, whereas the highest values were obtained from the EP samples. CONCLUSIONS: The experiments described can help manufacturers identify the most appropriate parameters and their ranges within which optimal surface characteristics can be achieved.

Morphology of Co-Cr-Mo dental alloy surfaces polished by three different mechanical procedures.

The present study aims at characterizing the three-dimensional (3-D) morphology of a Co-Cr-Mo dental alloy surface as a result of three different procedures used for polishing it. The sample surface morphology of the sampled surface was examined employing atomic force microscopy (AFM), statistical surface roughness parameters, and fractal analysis. An extra-hard dental alloy of cobalt-chromium-molybdenum (Co-Cr-Mo) (Wironit(®) , from BEGO, Bremen, Germany) was prepared and moulded. Different polishing treatments were carried out on three groups of six samples each--a total of 18 samples. The first group contained six electropolished (EP) samples. The second group containing six samples went through a mechanical polishing process employing green rubber discs and a high shine polishing paste applied by a rotating black brush (BB). The third group comprising six samples as well went through a mechanical polishing process by means of green rubber discs, high shine polishing paste, and a rotating deer leather brush (DL). Fractal analysis on the basis of a computational algorithm applied to the AFM data was employed for the 3-D quantitative characterization of the morphology of the sampled surfaces. The fractal dimension D (average ± standard deviation) of 3-D surfaces for BB samples (2.19 ± 0.07) is lower than that of the DL samples (2.24 ± 0.08), which is still lower than that of the EP samples (2.27 ± 0.09). The results indicated the BB samples as presenting the lowest values of statistical surface roughness parameters, thus the best surface finish, while the EP samples yielded the highest values.

Measurement of mandibular movements in patients with temporomandibular disorders and in asymptomatic subjects.

The aim of the study was to investigate the range of mandibular movements and to analyze the difference in range of mouth opening, right and left lateral movements, and protrusive movement between patients with clinical diagnoses of temporomandibular disorders and asymptomatic subjects (control group) in a young male population. A total of 240 subjects, aged 19-28, were included in the study. The TMD sample comprised 180 patients (60 patients with muscle disorders; 60 patients with disc displacement with reduction; and 60 patients with muscle disorders and disc displacement with reduction) and was compared with 60 healthy control subjects. All participants were evaluated by the attending dentists at baseline by means of a physical examination of the masticatory system and a history questionnaire which included the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) Axis I measures. Analysis of variance (ANOVA) with the post hoc Bonferroni criteria showed significant difference in ranges of mandibular movements between and within the groups of asymptomatic subjects and TMD patients for active mouth opening (p = 0.001), right lateral movement (p = 0.002), left lateral movement (p = 0.006), and protrusive movement (p = 0.05). It has been found that there are statistically significant differences in the range of mandibular movements that separate asymptomatic subjects and patients with muscle disorders and disc displacements with reduction in this young male population. However, we cannot conclude that measurements of active mandibular movements can discriminate one group (TMD patients) from the other (asymptomatic subjects), because the mean ranges of these active movements between the groups were measured in clinically "normal" values.