Evaluation of cruciate and slot auxiliary screw head design modifications for extracting stripped screw heads.

Slotted and cruciate auxiliary screw head design modifications for "salvaging" a stripped hexagonal head screw were studied. Thirty screws were divided into 3 groups: Group 1 = control without modification, Group 2 = auxiliary cruciate design modification and Group 3 = auxiliary slot design modification. Screws were inserted into adhesive filled high-density synthetic bone tunnels using a hexagonal driver. Group 1 screws were removed using a hexagonal driver. Group 2 and group 3 screws were removed using drivers that matched their respective auxiliary design modifications. All group 1 and group 3 screws (100%) were effectively extracted. Three of 10 (30%) group 2 screws could not be effectively extracted. Group 2 screws displayed greater stripping and deformation than the other groups. The auxiliary slot design modification withstood comparable extraction torques as control screws without significant deformation. Screws with a cruciate design modification displayed more frequent failure, greater stripping and deformation.

Comparison of volumetric bone mineral density in the tibial region of interest for ACL reconstruction.

Adequate tibial bone mineral density (BMD) is essential to soft tissue graft fixation during anterior cruciate ligament (ACL) reconstruction. The purpose of this study was to compare volumetric bone plug density measurements at the tibial region of interest for ACL reconstruction using a standardized immersion technique and Archimedes' principle. Cancellous bone cores were harvested from the proximal, middle, and distal metaphyseal regions of the lateral tibia and from the standard tibial tunnel location used for ACL reconstruction of 18 cadaveric specimens. Proximal tibial cores displayed 32.6% greater BMD than middle tibial cores and 31.8% greater BMD than distal tibial cores, but did not differ from the BMD of the tibial tunnel cores. Correlational analysis confirmed that the cancellous BMD in the tibial tunnel related to the cancellous BMD of the proximal and distal lateral tibial metaphysis. In conjunction with its adjacent cortical bone, the cancellous BMD of the region used for standard tibial tunnel placement provides an effective foundation for ACL graft fixation. In tibia with poor BMD, bicortical fixation that incorporates cortical bone from the distal tibial tunnel region is recommended.

Tendon graft fixation in ACL reconstruction: in vitro evaluation of bioabsorbable tenodesis screw.

BACKGROUND: Conventional ACL reconstruction requires sufficient tibial bone quality for secure graft fixation. We evaluated the mechanical characteristics of a supplemental tenodesis screw in cadaveric specimens. MATERIAL AND METHODS: One group of 7 specimens from 7-paired tibiae was randomly assigned to undergo tibialis anterior tendon graft-bone tunnel fixation with a bioabsorbable interference screw, using conventional ACL reconstruction techniques. The other group of 7 specimens underwent the same procedure supplemented with a bioabsorbable tenodesis screw. All specimens were subjected to pullout testing on a servo hydraulic device. RESULTS: Specimens in the supplemental fixation group had double the load to failure (tenodesis = 467 (SD 184) N, control group = 223 (SD 66) N, p = 0.02) and were also one-third stiffer (tenodesis = 31 (SD 13) N/mm, control group = 21 (SD 6) N/mm, p = 0.03) than the specimens in the conventional fixation group. INTERPRETATION: Supplemental bioabsorbable tenodesis screw fixation may be advantageous for primary reconstruction in patients with low tibial bone mineral density or during revision procedures. By providing secure soft tissue graft-tibia fixation during the early phase after ACL reconstruction, supplemental tenodesis fixation may enable patients to participate safely in more intense, early rehabilitation.

The effects of a broad-spectrum matrix metalloproteinase inhibitor on characteristics of wound healing.

This study investigates the effects of a broad-spectrum matrix metalloproteinase inhibitor (MMP-i) on the rate of closure, hydroxyproline deposition, and macrophage infiltration in healing wounds. Full-thickness excisional wounds were created on the dorsal surface of hairless mice. Two experimental groups were used to measure rates of wound closure: (a) MMP-i administration (0.03, 0.3, 3.0, and 30 microg/mL) on days 0-1 postwounding (inflammatory phase) and (b) MMP-i administration (0.03, 0.3, 3.0, and 30 microg/mL) on days 6-8 postwounding (proliferative phase). Additionally, hydroxyproline deposition and percent macrophage infiltration were measured in skin wound margins on days 2, 8, and 16 postwounding. MMP-i administration at concentrations of 0.03, 0.3, and 3.0 microg/mL on days 0-1 postwounding significantly (p <.05) increased the rate of wound closure. No significant effect on the rate of wound closure was observed with MMP-i administration on days 6-8 postwounding. Hydroxyproline deposition was significantly (p <.05) increased on day 8 postwounding, and the percent macrophage infiltration was significantly (p <.05) decreased on day 2 postwounding by MMP-i administration on days 0-1 postwounding. These experiments demonstrate that MMP-i administration during the inflammatory phase significantly affects several characteristics of wound healing. We postulate that these effects may be attributed to decreased degradation of ECM components, increased concentrations of endogenous growth factors, and a shortened inflammatory phase.

Evaluation of the fixation and strength of a "rescue" revision pedicle screw.

One potential complication of pedicle screw instrumentation is long-term nerve root irritation, most commonly resulting from medial or inferior screw malpositioning. This study evaluated the pullout strength and fatigue strength properties of a novel "rescue" revision screw designed to reduce the sequelae of medial screw malpositioning by eliminating threads along the section of the screw corresponding to the pedicular region. The results of this study revealed that a rescue screw with threads eliminated from one half of its circumference provided comparable pullout strength to fully threaded pedicle screws in cadaveric specimens. In addition, mechanical testing of the rescue screw did not show a decrease in fatigue strength characteristics compared with controls. These results suggest that the rescue screw may offer a way to decrease nerve root irritation caused by canal impingement without jeopardizing the overall strength of the spinal construct.