Optimization of waveguide fabrication processes in lithium-niobate-on-insulator platform.

Lithium niobate (LN) is used in diverse applications such as spectroscopy, remote sensing, and quantum communications. The emergence of lithium-niobate-on-insulator (LNOI) technology and its commercial accessibility represent significant milestones. This technology aids in harnessing the full potential of LN's properties, such as achieving tight mode confinement and strong overlap with applied electric fields, which has enabled LNOI-based electro-optic modulators to have ultra-broad bandwidths with low-voltage operation and low power consumption. Consequently, LNOI devices are emerging as competitive contenders in the integrated photonics landscape. However, the nanofabrication, particularly LN etching, presents a notable challenge. LN is hard, dense, and chemically inert. It has anisotropic etch behavior and a propensity to produce material redeposition during the reactive-ion plasma etch process. These factors make fabricating low-loss LNOI waveguides (WGs) challenging. Recognizing the pivotal role of addressing these fabrication challenges for obtaining low-loss WGs, our research focuses on a systematic study of various process steps in fabricating LNOI WGs and other photonic structures. In particular, our study involves (i) careful selection of hard mask materials, (ii) optimization of inductively coupled plasma etch parameters, and finally, (iii) determining the optimal post-etch cleaning approach to remove redeposited material on the sidewalls of the etched photonic structures. Using the recipe established, we realized optical WGs with total (propagation and coupling) loss value of -10.5 dB, comparable to established values found in the literature. Our findings broaden our understanding of optimizing fabrication processes for low-loss lithium-niobate waveguides and can serve as an accessible resource in advancing LNOI technology.

Data-driven simulations for training AI-based segmentation of neutron images.

Neutron interferometry uniquely combines neutron imaging and scattering methods to enable characterization of multiple length scales from 1 nm to 10 µm. However, building, operating, and using such neutron imaging instruments poses constraints on the acquisition time and on the number of measured images per sample. Experiment time-constraints yield small quantities of measured images that are insufficient for automating image analyses using supervised artificial intelligence (AI) models. One approach alleviates this problem by supplementing annotated measured images with synthetic images. To this end, we create a data-driven simulation framework that supplements training data beyond typical data-driven augmentations by leveraging statistical intensity models, such as the Johnson family of probability density functions (PDFs). We follow the simulation framework steps for an image segmentation task including Estimate PDFs → Validate PDFs → Design Image Masks → Generate Intensities → Train AI Model for Segmentation. Our goal is to minimize the manual labor needed to execute the steps and maximize our confidence in simulations and segmentation accuracy. We report results for a set of nine known materials (calibration phantoms) that were imaged using a neutron interferometer acquiring four-dimensional images and segmented by AI models trained with synthetic and measured images and their masks.

Precise quantum measurement of vacuum with cold atoms.

We describe the cold-atom vacuum standards (CAVS) under development at the National Institute of Standards and Technology (NIST). The CAVS measures pressure in the ultra-high and extreme-high vacuum regimes by measuring the loss rate of sub-millikelvin sensor atoms from a magnetic trap. Ab initio quantum scattering calculations of cross sections and rate coefficients relate the density of background gas molecules or atoms to the loss rate of ultra-cold sensor atoms. The resulting measurement of pressure through the ideal gas law is traceable to the second and the kelvin, making it a primary realization of the pascal. At NIST, two versions of the CAVS have been constructed: a laboratory standard used to achieve the lowest possible uncertainties and pressures, and a portable version that is a potential replacement for the Bayard-Alpert ionization gauge. Both types of CAVSs are connected to a combined extreme-high vacuum flowmeter and dynamic expansion system to enable sensing of a known pressure of gas. In the near future, we anticipate being able to compare the laboratory scale CAVS, the portable CAVS, and the flowmeter/dynamic expansion system to validate the operation of the CAVS as both a standard and vacuum gauge.

Fabrication and Testing of Photonic Thermometers.

In recent years, a push for developing novel silicon photonic devices for telecommunications has generated a vast knowledge base that is now being leveraged for developing sophisticated photonic sensors. Silicon photonic sensors seek to exploit the strong confinement of light in nano-waveguides to transduce changes in physical state to changes in resonance frequency. In the case of thermometry, the thermo-optic coefficient, i.e., changes in refractive index due to temperature, causes the resonant frequency of the photonic device such as a Bragg grating to drift with temperature. We are developing a suite of photonic devices that leverage recent advances in telecom compatible light sources to fabricate cost-effective photonic temperature sensors, which can be deployed in a wide variety of settings ranging from controlled laboratory conditions, to the noisy environment of a factory floor or a residence. In this manuscript, we detail our protocol for the fabrication and testing of photonic thermometers.

Assessing Radiation Hardness of Silicon Photonic Sensors.

In recent years, silicon photonic platforms have undergone rapid maturation enabling not only optical communication but complex scientific experiments ranging from sensors applications to fundamental physics investigations. There is considerable interest in deploying photonics-based communication and science instruments in harsh environments such as outer space, where radiation damage is a significant concern. In this study, we have examined the impact of cobalt-60 γ-ray radiation up to 1 megagray (MGy) absorbed dose on silicon photonic devices. We do not find any systematic impact of radiation on passivated devices, indicating the durability of passivated silicon devices under harsh conditions.

Toward 3D Printed Hydrogen Storage Materials Made with ABS-MOF Composites.

The push to advance efficient, renewable, and clean energy sources has brought with it an effort to generate materials that are capable of storing hydrogen. Metal-organic framework materials (MOFs) have been the focus of many such studies as they are categorized for their large internal surface areas. We have addressed one of the major shortcomings of MOFs (their processibility) by creating and 3D printing a composite of acrylonitrile butadiene styrene (ABS) and MOF-5, a prototypical MOF, which is often used to benchmark H2 uptake capacity of other MOFs. The ABS-MOF-5 composites can be printed at MOF-5 compositions of 10% and below. Other physical and mechanical properties of the polymer (glass transition temperature, stress and strain at the breaking point, and Young's modulus) either remain unchanged or show some degree of hardening due to the interaction between the polymer and the MOF. We do observe some MOF-5 degradation through the blending process, likely due to the ambient humidity through the purification and solvent casting steps. Even with this degradation, the MOF still retains some of its ability to uptake H2, seen in the ability of the composite to uptake more H2 than the pure polymer. The experiments and results described here represent a significant first step toward 3D printing MOF-5-based materials for H2 storage.

Towards Replacing Resistance Thermometry with Photonic Thermometry.

Resistance thermometry provides a time-tested method for taking temperature measurements that has been painstakingly developed over the last century. However, fundamental limits to resistance-based approaches along with a desire to reduce the cost of sensor ownership and increase sensor stability has produced considerable interest in developing photonic temperature sensors. Here we demonstrate that silicon photonic crystal cavity-based thermometers can measure temperature with uncertainities of 175 mK (k = 1), where uncertainties are dominated by ageing effects originating from the hysteresis in the device packaging materials. Our results, a ≈ 4-fold improvement over recent developments, clearly demonstate the rapid progress of silicon photonic sensors in replacing legacy devices.

Challenges to miniaturizing cold atom technology for deployable vacuum metrology.

Cold atoms are excellent metrological tools; they currently realize SI time and, soon, SI pressure in the ultra-high (UHV) and extreme high vacuum (XHV) regimes. The development of primary, vacuum metrology based on cold atoms currently falls under the purview of national metrology institutes. Under the emerging paradigm of the "quantum-SI", these technologies become deployable (relatively easy-to-use sensors that integrate with other vacuum chambers), providing a primary realization of the pascal in the UHV and XHV for the end-user. Here, we discuss the challenges that this goal presents. We investigate, for two different modes of operation, the expected corrections to the ideal cold-atom vacuum gauge and estimate the associated uncertainties. Finally, we discuss the appropriate choice of sensor atom, the light Li atom rather than the heavier Rb.

Quantum-based vacuum metrology at NIST.

The measurement science in realizing and disseminating the unit for pressure in the International System of Units (SI), the pascal (Pa), has been the subject of much interest at NIST. Modern optical-based techniques for pascal metrology have been investigated, including multi-photon ionization and cavity ringdown spectroscopy. Work is ongoing to recast the pascal in terms of quantum properties and fundamental constants and in so doing, make vacuum metrology consistent with the global trend toward quantum-based metrology. NIST has ongoing projects that interrogate the index of refraction of a gas using an optical cavity for low vacuum, and count background particles in high vacuum to extreme high vacuum using trapped laser-cooled atoms.

Development of a new UHV/XHV pressure standard (Cold Atom Vacuum Standard).

The National Institute of Standards and Technology has recently begun a program to develop a primary pressure standard that is based on ultra-cold atoms, covering a pressure range of 1 × 10-6 Pa to 1 × 10-10 Pa and possibly lower. These pressures correspond to the entire ultra-high vacuum (UHV) range and extend into the extreme-high vacuum (XHV). This cold-atom vacuum standard (CAVS) is both a primary standard and absolute sensor of vacuum. The CAVS is based on the loss of cold, sensor atoms (such as the alkali-metal lithium) from a magnetic trap due to collisions with the background gas (primarily H2) in the vacuum. The pressure is determined from a thermally-averaged collision cross section, which is a fundamental atomic property, and the measured loss rate. The CAVS is primary because it will use collision cross sections determined from ab initio calculations for the Li + H2 system. Primary traceability is transferred to other systems of interest using sensitivity coefficients.

Gas Uptake of 3-D Printed Acrylonitrile Butadiene Styrene (ABS) Using a Vacuum Apparatus Designed for Absorption and Desorption Studies.

We describe a vacuum apparatus for determining the outgassing rate into vacuum, the diffusion coefficient, and the amount of gas absorbed for various materials. The diffusion coefficient is determined from a model applied to time-dependent desorption data taken using a throughput method. We used this method to determine the diffusion coefficient, D, for H2O in 3-D printed acrylonitrile butadiene styrene (ABS). We found DH2O = 8.3 × 10-8 cm2/s ± 1.3 × 10-8 cm2/s (k = 1; 67% confidence interval) at 23.2 °C. This result was compared to the diffusion coefficient determined another by a gravimetric method, in which the sample weight was monitored as it absorbed gas from the atmosphere. The two methods agreed to within 3%, which is well within the uncertainty of the measurement. We also found that at least 80% of the atmospheric gas (air) absorbed by the ABS is water. The total amount of all atmospheric gas absorbed by ABS was about 0.35% by weight when exposed to ambient air in the laboratory, which was at a pressure of 101 kPa with a relative humidity of 57% at 22.2 °C.

On-chip silicon waveguide Bragg grating photonic temperature sensor.

Resistance thermometry is a time-tested method for taking temperature measurements. In recent years, fundamental limits to resistance-based approaches have spurred considerable interest in developing photonic temperature sensors as a viable alternative. In this study, we demonstrate that our photonic thermometer, which consists of a silicon waveguide integrated with a Bragg grating, can be used to measure temperature changes over the range of 5°C-160°C, with a combined expanded uncertainty [k=2, 95% confidence level] of 1.25°C. Computational modeling of the sensor predicts the resonance wavelength and effective refractive index within 4% of the measured value.

Nanoscale interfacial friction and adhesion on supported versus suspended monolayer and multilayer graphene.

Using atomic force microscopy (AFM), supported by semicontinuum numerical simulations, we determine the effect of tip-subsurface van der Waals interactions on nanoscale friction and adhesion for suspended and silicon dioxide supported graphene of varying thickness. While pull-off force measurements reveal no layer number dependence for supported graphene, suspended graphene exhibits an increase in pull-off force with thickness. Further, at low applied loads, friction increases with increasing number of layers for suspended graphene, in contrast to reported trends for supported graphene. We attribute these results to a competition between local forces that determine the deformation of the surface layer, the profile of the membrane as a whole, and van der Waals forces between the AFM tip and subsurface layers. We find that friction on supported monolayer graphene can be fit using generalized continuum mechanics models, from which we extract the work of adhesion and interfacial shear strength. In addition, we show that tip-sample adhesive forces depend on interactions with subsurface material and increase in the presence of a supporting substrate or additional graphene layers.

Electromechanical properties of graphene drumheads.

We determined the electromechanical properties of a suspended graphene layer by scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) measurements, as well as computational simulations of the graphene-membrane mechanics and morphology. A graphene membrane was continuously deformed by controlling the competing interactions with a STM probe tip and the electric field from a back-gate electrode. The probe tip-induced deformation created a localized strain field in the graphene lattice. STS measurements on the deformed suspended graphene display an electronic spectrum completely different from that of graphene supported by a substrate. The spectrum indicates the formation of a spatially confined quantum dot, in agreement with recent predictions of confinement by strain-induced pseudomagnetic fields.

Liquid crystal wavefront corrector with modal response based on spreading of the electric field in a dielectric material.

A novel liquid crystal (LC) wavefront corrector with smooth modal influence functions is proposed and realized. The device consists of a thin layer of planar aligned nematic LC sandwiched between a glass plate with a conductive electrode and a plate made of ceramic material with a very high dielectric constant. Control electrodes are positioned on the back side of the ceramic plate, opposite to the LC. The modal character of the response is determined by spreading of the electric field in the ceramic plate. The device implemented is operating in a reflective (mirror) mode; however, similar principles can be used to build a transmissive device. Low cost and simplicity of control make it a good alternative to continuous face-sheet deformable mirrors.

Molecular cloning and analysis of full-length genome of HIV type 1 strains prevalent in countries of the former Soviet Union.

The HIV-1 epidemic among injecting drug users (IDUs) in countries of the former Soviet Union (FSU) was caused mainly by two HIV-1 variants: subtype A and CRF03-AB. To date only three full-length HIV-I genomes from the FSU have been sequenced: one subtype A from Byelorussia and two CRF03-AB from Russia. We report the full-length genome cloning and analysis of two more HIV-1 strains from the FSU countries (98UA0116 of subtype A and 98BY10443 of CRF03-AB). Isolate 98UA0116 is the second cloned and sequenced full-length HIV-1 genome of subtype A lineage from the FSU, which may be a novel subsubtype within sub-type A. Isolate 98BY10443 is the third full-length HIV-1 genome of CRF03-AB in the world to be cloned and sequenced. Additionally, it is the first CRF03-AB strain discovered in Byelorussia. Cloned genomic sequences of the FSU HIV-1 isolates are being used for the development of a region-specific HIV-1 vaccine.

Estimating the prevalence of syringe-borne and sexually transmitted diseases among injection drug users in St Petersburg, Russia.

Injection drug users (IDUs) are the vanguard of the human immunodeficiency virus (HIV) epidemic in Russia. We sought a non-invasive method to estimate a point prevalence of HIV, hepatitis B virus (HBV), hepatitis C virus (HCV), syphilis and risk behaviours in IDUs attending the syringe exchange programme (SEP) in St Petersburg, Russia. One hundred and one IDUs returning syringes to the St Petersburg SEP were invited to complete a questionnaire requesting demographic, knowledge, and behavioural information, and to provide their syringes for antibody testing. The median age of IDUs was 23 years. Syringe prevalences were: 10.9% for HIV, 78.2% for HCV, 15.8% for HBV, and 6.9% for syphilis. All respondents recognized drug-related risk factors for getting AIDS. Only two-thirds of subjects recognized condoms to prevent sexually transmitted infections and half knew that oil-based lubricants are not appropriate for condoms. The IDU population studied was young and requires additional interventions to encourage safer sexual behaviours.