Operando tracking of oxidation-state changes by coupling electrochemistry with time-resolved X-ray absorption spectroscopy demonstrated for water oxidation by a cobalt-based catalyst film.

Transition metal oxides are promising electrocatalysts for water oxidation, i.e., the oxygen evolution reaction (OER), which is critical in electrochemical production of non-fossil fuels. The involvement of oxidation state changes of the metal in OER electrocatalysis is increasingly recognized in the literature. Tracing these oxidation states under operation conditions could provide relevant information for performance optimization and development of durable catalysts, but further methodical developments are needed. Here, we propose a strategy to use single-energy X-ray absorption spectroscopy for monitoring metal oxidation-state changes during OER operation with millisecond time resolution. The procedure to obtain time-resolved oxidation state values, using two calibration curves, is explained in detail. We demonstrate the significance of this approach as well as possible sources of data misinterpretation. We conclude that the combination of X-ray absorption spectroscopy with electrochemical techniques allows us to investigate the kinetics of redox transitions and to distinguish the catalytic current from the redox current. Tracking of the oxidation state changes of Co ions in electrodeposited oxide films during cyclic voltammetry in neutral pH electrolyte serves as a proof of principle.

Morphology and mechanism of highly selective Cu(II) oxide nanosheet catalysts for carbon dioxide electroreduction.

Cu oxides catalyze the electrochemical carbon dioxide reduction reaction (CO2RR) to hydrocarbons and oxygenates with favorable selectivity. Among them, the shape-controlled Cu oxide cubes have been most widely studied. In contrast, we report on novel 2-dimensional (2D) Cu(II) oxide nanosheet (CuO NS) catalysts with high C2+ products, selectivities (> 400 mA cm-2) in gas diffusion electrodes (GDE) at industrially relevant currents and neutral pH. Under applied bias, the (001)-orientated CuO NS slowly evolve into highly branched, metallic Cu0 dendrites that appear as a general dominant morphology under electrolyte flow conditions, as attested by operando X-ray absorption spectroscopy and in situ electrochemical transmission electron microscopy (TEM). Millisecond-resolved differential electrochemical mass spectrometry (DEMS) track a previously unavailable set of product onset potentials. While the close mechanistic relation between CO and C2H4 was thereby confirmed, the DEMS data help uncover an unexpected mechanistic link between CH4 and ethanol. We demonstrate evidence that adsorbed methyl species, *CH3, serve as common intermediates of both CH3H and CH3CH2OH and possibly of other CH3-R products via a previously overlooked pathway at (110) steps adjacent to (100) terraces at larger overpotentials. Our mechanistic conclusions challenge and refine our current mechanistic understanding of the CO2 electrolysis on Cu catalysts.

Structural and functional role of anions in electrochemical water oxidation probed by arsenate incorporation into cobalt-oxide materials.

Direct (photo)electrochemical production of non-fossil fuels from water and CO2 requires water-oxidation catalysis at near-neutral pH in the presence of appropriate anions that serve as proton acceptors. We investigate the largely enigmatic structural role of anions in water oxidation for the prominent cobalt-phosphate catalyst (CoCat), an amorphous and hydrated oxide material. Co3([(P/As)O]4)2·8H2O served, in conjunction with phosphate-arsenate exchange, as a synthetic model system. Its structural transformation was induced by prolonged operation at catalytic potentials and probed by X-ray absorption spectroscopy not only at the metal (Co), but for the first time also at the anion (As) K-edge. For initially isostructural microcrystals, anion exchange determined the amorphization process and final structure. Comparison to amorphous electrodeposited Co oxide revealed that in CoCat, the arsenate binds not only at oxide-layer edges, but also arsenic substitutes cobalt positions within the layered-oxide structure in an unusual AsO6 coordination. Our results show that in water oxidation catalysis at near-neutral pH, anion type and exchange dynamics correlate with the catalyst structure and redox properties.

Electrodeposited AgCu Foam Catalysts for Enhanced Reduction of CO2 to CO.

Selective electrochemical reduction of CO2 is an emerging field which needs more active and stable catalysts for its practicability. In this work, we have studied the influence of Ag metal incorporation into Cu dendritic structures on the product distribution and selectivity of CO2 electroreduction. Bimetallic AgCu foams prepared by hydrogen bubble templated electrodeposition shift the potentials of CO production to more positive values compared to bulk silver. The presence of Ag during the electrodeposition significantly changed the size and the shape of the dendrites in the pore walls of AgCu foams compared to Cu foam. The CO adsorption characteristics are studied by operando Raman spectroscopy. In the presence of Ag, the maximum CO adsorption is observed at a more positive potential. As a result, an improved selectivity for CO is obtained for AgCu foam catalysts at lower overpotentials compared to Cu foam catalyst, evidencing a synergistic effect between the bimetallic components. We were successful in increasing the CO mass activity with respect to the total Ag amount. AgCu foams are found to retain the CO selectivity during long-term operation, and with their easily scalable electrodeposition synthesis they possess high potential for industrial application.

New aspects of operando Raman spectroscopy applied to electrochemical CO2 reduction on Cu foams.

The mechanism of electrochemical CO2 reduction (CO2RR) on copper surfaces is still insufficiently understood. Operando Raman spectroscopy is ideally suited to elucidate the role of adsorbed reaction intermediates and products. For a Cu foam material which has been previously characterized regarding electrochemical properties and product spectrum, 129 operando spectra are reported, covering the spectral range from 250 to 3300 cm-1. (1) The dendritic foam structure facilitates surface-enhanced Raman spectroscopy (SERS) and thus electrochemical operando spectroscopy, without any further surface manipulations. (2) Both Raman enhancement and SERS background depend strongly on the electric potential and the "history" of preceding potential sequences. (3) To restore the plausible intensity dependencies of Raman bands, normalization to the SERS background intensity is proposed. (4) Two distinct types of *CO adsorption modes are resolved. (5) Hysteresis in the potential-dependent *CO desorption supports previous electrochemical analyses; saturating *CO adsorption may limit CO formation rates. (6) HCO3 - likely deprotonates upon adsorption so that exclusively adsorbed carbonate is detectable, but with strong dependence on the preceding potential sequences. (7) A variety of species and adsorption modes of reaction products containing C-H bonds were detected and compared to reference solutions of likely reaction products, but further investigations are required for assignment to specific molecular species. (8) The Raman bands of adsorbed reaction products depend weakly or strongly on the preceding potential sequences. In future investigations, suitably designed potential protocols could provide valuable insights into the potential-dependent kinetics of product formation, adsorption, and desorption.

Reactivity Determinants in Electrodeposited Cu Foams for Electrochemical CO2 Reduction.

CO2 reduction is of significant interest for the production of nonfossil fuels. The reactivity of eight Cu foams with substantially different morphologies was comprehensively investigated by analysis of the product spectrum and in situ electrochemical spectroscopies (X-ray absorption near edge structure, extended X-ray absorption fine structure, X-ray photoelectron spectroscopy, and Raman spectroscopy). The approach provided new insight into the reactivity determinants: The morphology, stable Cu oxide phases, and *CO poisoning of the H2 formation reaction are not decisive; the electrochemically active surface area influences the reactivity trends; macroscopic diffusion limits the proton supply, resulting in pronounced alkalization at the CuCat surfaces (operando Raman spectroscopy). H2 and CH4 formation was suppressed by macroscopic buffer alkalization, whereas CO and C2 H4 formation still proceeded through a largely pH-independent mechanism. C2 H4 was formed from two CO precursor species, namely adsorbed *CO and dissolved CO present in the foam cavities.

Spectroscopic identification of active sites for the oxygen evolution reaction on iron-cobalt oxides.

The emergence of disordered metal oxides as electrocatalysts for the oxygen evolution reaction and reports of amorphization of crystalline materials during electrocatalysis reveal a need for robust structural models for this class of materials. Here we apply a combination of low-temperature X-ray absorption spectroscopy and time-resolved in situ X-ray absorption spectroelectrochemistry to analyze the structure and electrochemical properties of a series of disordered iron-cobalt oxides. We identify a composition-dependent distribution of di-µ-oxo bridged cobalt-cobalt, di-µ-oxo bridged cobalt-iron and corner-sharing cobalt structural motifs in the composition series. Comparison of the structural model with (spectro)electrochemical data reveals relationships across the composition series that enable unprecedented assignment of voltammetric redox processes to specific structural motifs. We confirm that oxygen evolution occurs at two distinct reaction sites, di-µ-oxo bridged cobalt-cobalt and di-µ-oxo bridged iron-cobalt sites, and identify direct and indirect modes-of-action for iron ions in the mixed-metal compositions.

Electrosynthesis of Biomimetic Manganese-Calcium Oxides for Water Oxidation Catalysis--Atomic Structure and Functionality.

Water-oxidizing calcium-manganese oxides, which mimic the inorganic core of the biological catalyst, were synthesized and structurally characterized by X-ray absorption spectroscopy at the manganese and calcium K edges. The amorphous, birnesite-type oxides are obtained through a simple protocol that involves electrodeposition followed by active-site creation through annealing at moderate temperatures. Calcium ions are inessential, but tune the electrocatalytic properties. For increasing calcium/manganese molar ratios, both Tafel slopes and exchange current densities decrease gradually, resulting in optimal catalytic performance at calcium/manganese molar ratios of close to 10 %. Tracking UV/Vis absorption changes during electrochemical operation suggests that inactive oxides reach their highest, all-Mn(IV) oxidation state at comparably low electrode potentials. The ability to undergo redox transitions and the presence of a minor fraction of Mn(III) ions at catalytic potentials is identified as a prerequisite for catalytic activity.

Heterogeneous water oxidation: surface activity versus amorphization activation in cobalt phosphate catalysts.

Is water oxidation catalyzed at the surface or within the bulk volume of solid oxide materials? This question is addressed for cobalt phosphate catalysts deposited on inert electrodes, namely crystallites of pakhomovskyite (Co3(PO4)2⋅8 H2O, Pak) and phosphate-containing Co oxide (CoCat). X-ray spectroscopy reveals that oxidizing potentials transform the crystalline Pak slowly (5-8 h) but completely into the amorphous CoCat. Electrochemical analysis supports high-TOF surface activity in Pak, whereas its amorphization results in dominating volume activity of the thereby formed CoCat material. In the directly electrodeposited CoCat, volume catalysis prevails, but not at very low levels of the amorphous material, implying high-TOF catalysis at surface sites. A complete picture of heterogeneous water oxidation requires insight in catalysis at the electrolyte-exposed "outer surface", within a hydrated, amorphous volume phase, and modes and kinetics of restructuring upon operation.

Water oxidation by amorphous cobalt-based oxides: volume activity and proton transfer to electrolyte bases.

Water oxidation in the neutral pH regime catalyzed by amorphous transition-metal oxides is of high interest in energy science. Crucial determinants of electrocatalytic activity were investigated for a cobalt-based oxide film electrodeposited at various thicknesses on inert electrodes. For water oxidation at low current densities, the turnover frequency (TOF) per cobalt ion of the bulk material stayed fully constant for variation of the thickness of the oxide film by a factor of 100 (from about 15 nm to 1.5 µm). Thickness variation changed neither the nanostructure of the outer film surface nor the atomic structure of the oxide catalyst significantly. These findings imply catalytic activity of the bulk hydrated oxide material. Nonclassical dependence on pH was observed. For buffered electrolytes with pKa values of the buffer base ranging from 4.7 (acetate) to 10.3 (hydrogen carbonate), the catalytic activity reflected the protonation state of the buffer base in the electrolyte solution directly and not the intrinsic catalytic properties of the oxide itself. It is proposed that catalysis of water oxidation occurs within the bulk hydrated oxide film at the margins of cobalt oxide fragments of molecular dimensions. At high current densities, the availability of a proton-accepting base at the catalyst-electrolyte interface controls the rate of water oxidation. The reported findings may be of general relevance for water oxidation catalyzed at moderate pH by amorphous transition-metal oxides.

Shining light on integrity of a tetracobalt-polyoxometalate water oxidation catalyst by X-ray spectroscopy before and after catalysis.

Modification of the Co-oxo cores of cobalt-polyoxometalate water oxidation catalysts is detectable by X-ray absorption spectroscopy (XAS) as demonstrated by comparison of Na10[Co4(H2O)2(PW9O34)2] (1) and Na17[((Co(H2O))Co2PW9O34)2(PW6O26)] (2). XAS reveals the integrity of 1 uncompromised by oxidant-driven water oxidation, which proceeds without formation of catalytic cobalt oxide.

Water oxidation by electrodeposited cobalt oxides--role of anions and redox-inert cations in structure and function of the amorphous catalyst.

For the production of nonfossil fuels, water oxidation by inexpensive cobalt-based catalysts is of high interest. Films for the electrocatalysis of water oxidation were obtained by oxidative self-assembly (electrodeposition) from aqueous solutions containing, apart from Co, either K, Li or Ca with either a phosphate, acetate or chloride anion. X-ray absorption spectroscopy (XAS) at the Co K-edge revealed clusters of edge-sharing CoO(6) octahedra in all films, but the size or structural disorder of the Co-oxido clusters differed. Whereas potassium binding is largely unspecific, CaCo(3) O(4) cubanes, which resemble the CaMn(3) O(4) cubane of the biological catalyst in oxygenic photosynthesis, may form, as suggested by XAS at the Ca K-edge. Cyclic voltammograms in a potassium phosphate buffer at pH 7 revealed that no specific combination of anions and redox-inactive cations is required for catalytic water oxidation. However, the anion type modulates not only the size (or order) of the Co-oxido clusters, but also electrodeposition rates, redox potentials, the capacity for oxidative charging, and catalytic currents. On these grounds, structure-activity relations are discussed.

Nickel-oxido structure of a water-oxidizing catalyst film.

The atomic structure of an electrodeposited Ni catalyst film is dominated by extensive di-µ-oxido bridging between Ni(III/IV) ions, as revealed by X-ray absorption spectroscopy. The structure is surprisingly similar to that of an analogous Co-based film and colloidal Mn-based catalysts. Structural requirements for water oxidation are discussed.