Shaping the spectral correlation of bi-photon quantum frequency combs by multi-frequency excitation of an SOI integrated nonlinear resonator.

We reveal the generation of a broadband (> 1.9 THz) bi-photon quantum frequency comb (QFC) in a silicon-on-insulator (SOI) Fabry-Pérot micro-cavity and the control of its spectral correlation properties. Correlated photon pairs are generated through three spontaneous four-wave mixing (SFWM) processes by using a co-polarized bi-chromatic coherent input with power P1 and P2 on adjacent resonances of the nonlinear cavity. Adjusting the spectral power ratio r = P1/(P1 + P2) allows control over the influence of each process leading to an enhancement of the overall photon pair generation rate (PGR) µ(r) by a maximal factor of µ(r = 0.5)/µ(r = 0) ≈ 1.5, compared to the overall PGR provided by a single-pump configuration with the same power budget. We demonstrate that the efficiency aND of the non-degenerate excitation SFWM process (NDP) doubles the efficiency a1 ≈ a2 of the degenerate excitation SFWM processes (DP), showing a good agreement with the provided model.

Metasurface-enhanced light detection and ranging technology.

Deploying advanced imaging solutions to robotic and autonomous systems by mimicking human vision requires simultaneous acquisition of multiple fields of views, named the peripheral and fovea regions. Among 3D computer vision techniques, LiDAR is currently considered at the industrial level for robotic vision. Notwithstanding the efforts on LiDAR integration and optimization, commercially available devices have slow frame rate and low resolution, notably limited by the performance of mechanical or solid-state deflection systems. Metasurfaces are versatile optical components that can distribute the optical power in desired regions of space. Here, we report on an advanced LiDAR technology that leverages from ultrafast low FoV deflectors cascaded with large area metasurfaces to achieve large FoV (150°) and high framerate (kHz) which can provide simultaneous peripheral and central imaging zones. The use of our disruptive LiDAR technology with advanced learning algorithms offers perspectives to improve perception and decision-making process of ADAS and robotic systems.

Separating arbitrary free-space beams with an integrated photonic processor.

Free-space optics naturally offers multiple-channel communications and sensing exploitable in many applications. The different optical beams will, however, generally be overlapping at the receiver, and, especially with atmospheric turbulence or other scattering or aberrations, the arriving beam shapes may not even be known in advance. We show that such beams can be still separated in the optical domain, and simultaneously detected with negligible cross-talk, even if they share the same wavelength and polarization, and even with unknown arriving beam shapes. The kernel of the adaptive multibeam receiver presented in this work is a programmable integrated photonic processor that is coupled to free-space beams through a two-dimensional array of optical antennas. We demonstrate separation of beam pairs arriving from different directions, with overlapping spatial modes in the same direction, and even with mixing between the beams deliberately added in the path. With the circuit's optical bandwidth of more than 40 nm, this approach offers an enabling technology for the evolution of FSO from single-beam to multibeam space-division multiplexed systems in a perturbed environment, which has been a game-changing transition in fiber-optic systems.

Amorphous-silicon visible-light detector integrated on silicon nitride waveguides.

Visible-light integrated photonics is emerging as a promising technology for the realization of optical devices for applications in sensing, quantum information and communications, imaging, and displays. Among the existing photonic platforms, high-index-contrast silicon nitride (Si3N4) waveguides offer broadband transparency in the visible spectral range and a high scale of integration. As the complexity of photonic integrated circuits (PICs) increases, on-chip detectors are required to monitor their working point for reconfiguration and stabilization operations. In this Letter, we present a semi-transparent in-line power monitor integrated on Si3N4 waveguides that operates in the red-light wavelength range (660 nm). The proposed device exploits the photoconductivity of a hydrogenated amorphous-silicon (a-Si:H) film that is evanescently coupled to an optical waveguide. Experimental results show a responsivity of 30 mA/W, a sensitivity of -45 dBm, and a sub-µs time response. These features enable the use of the proposed photoconductor for high-sensitivity monitoring and control of visible-light Si3N4 PICs.

High precision integrated photonic thermometry enabled by a transfer printed diamond resonator on GaN waveguide chip.

We demonstrate a dual-material integrated photonic thermometer, fabricated by high accuracy micro-transfer printing. A freestanding diamond micro-disk resonator is printed in close proximity to a gallium nitride on a sapphire racetrack resonator, and respective loaded Q factors of 9.1 × 104 and 2.9 × 104 are measured. We show that by using two independent wide-bandgap materials, tracking the thermally induced shifts in multiple resonances, and using optimized curve fitting tools the measurement error can be reduced to 9.2 mK. Finally, for the GaN, in a continuous acquisition measurement we record an improvement in minimum Allan variance, occurring at an averaging time four times greater than a comparative silicon device, indicating better performance over longer time scales.

Automated Nanoscale Absolute Accuracy Alignment System for Transfer Printing.

The heterogeneous integration of micro- and nanoscale devices with on-chip circuits and waveguide platforms is a key enabling technology, with wide-ranging applications in areas including telecommunications, quantum information processing, and sensing. Pick and place integration with absolute positional accuracy at the nanoscale has been previously demonstrated for single proof-of-principle devices. However, to enable scaling of this technology for realization of multielement systems or high throughput manufacturing, the integration process must be compatible with automation while retaining nanoscale accuracy. In this work, an automated transfer printing process is realized by using a simple optical microscope, computer vision, and high accuracy translational stage system. Automatic alignment using a cross-correlation image processing method demonstrates absolute positional accuracy of transfer with an average offset of <40 nm (3σ < 390 nm) for serial device integration of both thin film silicon membranes and single nanowire devices. Parallel transfer of devices across a 2 × 2 mm2 area is demonstrated with an average offset of <30 nm (3σ < 705 nm). Rotational accuracy better than 45 mrad is achieved for all device variants. Devices can be selected and placed with high accuracy on a target substrate, both from lithographically defined positions on their native substrate or from a randomly distributed population. These demonstrations pave the way for future scalable manufacturing of heterogeneously integrated chip systems.

Thermo-optic coefficient of PECVD silicon-rich silicon nitride.

The thermo-optic coefficient (TOC) of photonic integrated waveguides fabricated on silicon-rich silicon nitride grown by plasma-enanched chemical vapor deposition is characterized for the first time, to the best of our knowledge. The TOC is found to increase linearly with the fractional composition of silicon over a range from that of silicon nitride to a-Si. This finding is significant for improving the power efficiency of thermally tuned photonic integrated circuits.

Trimming of silicon-on-insulator ring-resonators via localized laser annealing.

We propose a post-fabrication trimming method for the silicon-on-insulator photonic platform based on localised laser annealing of hydrogen silsesquioxane (HSQ) cladding. The technique is fast, does not degrade the device performance, does not require additional fabrication steps, and can therefore be implemented at minimal cost. Here we experimentally demonstrated how the spectrum of a ring resonator can be shifted by over 1 nm by annealing a section of the device as short as 30 µm, corresponding to a change in the effective refractive index of ∼10-2. Modifications of both the HSQ refractive index and its chemical structure as a function of the annealing temperature are also discussed. Trimming of multi-ring resonators indicate that this technique can be effectively used for post-fabrication reconfiguration of complex photonic circuits or to compensate for the fabrication tolerances of a typical CMOS process.

Transfer printing of AlGaAs-on-SOI microdisk resonators for selective mode coupling and low-power nonlinear processes.

The transfer printing of aluminum gallium arsenide (AlGaAs) microdisk resonators onto a silicon-on-insulator (SOI) waveguide platform is demonstrated. The integrated resonators exhibit loaded ${Q}$Q-factors reaching $ 4 \times {10^4} $4×104, and the vertical assembly approach allows selective coupling to different spatial mode families. The hybrid platform's nonlinearity is characterized by four-wave mixing with a measured nonlinear coefficient of $ \gamma = 325\;{({\rm Wm})^{ - 1}} $γ=325(Wm)-1, with the devices demonstrating minimal two-photon absorption and free-carrier absorption losses that are inherent to SOI at telecommunications wavelengths.

Active On-Chip Dispersion Control Using a Tunable Silicon Bragg Grating.

Actively controllable dispersion in on-chip photonic devices is challenging to implement compared with free space optical components where mechanical degrees of freedom can be employed. Here, we present a method by which continuously tunable group delay control is achieved by modulating the refractive index profile of a silicon Bragg grating using thermo-optic effects. A simple thermal heater element is used to create tunable thermal gradients along the grating length, inducing chirped group delay profiles. Both effective blue and red chirp are realised using a single on-chip device over nanometre scale bandwidths. Group delay slopes are continuously tunable over a few ps/nm range from red to blue chirp, compatible with on-chip dispersion compensation for telecommunications picosecond pulse systems.

Orbital angular momentum vector modes (de)multiplexer based on multimode micro-ring.

Orbital angular momentum (OAM) multiplexing has emerged as an important method to increase the communication capacities in future optical information technologies. In this work, we demonstrate a silicon integrated OAM (de)multiplexer with a very simple structure. By simply tapping the evanescent wave of two different whispering gallery modes rotating inside a multimodal micro-ring resonator, four in-plane waveguide modes are converted to four free-space vector OAM beams with high mode purity. We further demonstrate chip-to-chip OAM multiplexing transmission using a pair of silicon devices, which shows low-level mode crosstalk and favorable link performance.

High accuracy transfer printing of single-mode membrane silicon photonic devices.

A transfer printing (TP) method is presented for the micro-assembly of integrated photonic devices from suspended membrane components. Ultra thin membranes with thickness of 150nm are directly printed without the use of mechanical support and adhesion layers. By using a correlation alignment scheme vertical integration of single-mode silicon waveguides is achieved with an average placement accuracy of 100±70nm. Silicon (Si) µ-ring resonators are also fabricated and show controllable optical coupling by varying the lateral absolute position to an underlying Si bus waveguide.

Direct fiber vector eigenmode multiplexing transmission seeded by integrated optical vortex emitters.

Spatial modes have received substantial attention over the last decades and are used in optical communication applications. In fiber-optic communications, the employed linearly polarized modes and phase vortex modes carrying orbital angular momentum can be synthesized by fiber vector eigenmodes. To improve the transmission capacity and miniaturize the communication system, straightforward fiber vector eigenmode multiplexing and generation of fiber-eigenmode-like polarization vortices (vector vortex modes) using photonic integrated devices are of substantial interest. Here, we propose and demonstrate direct fiber vector eigenmode multiplexing transmission seeded by integrated optical vortex emitters. By exploiting vector vortex modes (radially and azimuthally polarized beams) generated from silicon microring resonators etched with angular gratings, we report data-carrying fiber vector eigenmode multiplexing transmission through a 2-km large-core fiber, showing low-level mode crosstalk and favorable link performance. These demonstrations may open up added capacity scaling opportunities by directly accessing multiple vector eigenmodes in the fiber and provide compact solutions to replace bulky diffractive optical elements for generating various optical vector beams.

Silicon photonic filters with high rejection of both TE and TM modes for on-chip four wave mixing applications.

Wavelength selective filters represent one of the key elements for photonic integrated circuits (PIC) and many of their applications in linear and non-linear optics. In devices optimised for single polarisation operation, cross-polarisation scattering can significantly limit the achievable filter rejection. An on-chip filter consisting of elements to filter both TE and TM polarisations is demonstrated, based on a cascaded ring resonator geometry, which exhibits a high total optical rejection of over 60 dB. Monolithic integration of a cascaded ring filter with a four-wave mixing micro-ring device is also experimentally demonstrated with a FWM efficiency of -22dB and pump filter extinction of 62dB.

3 × 3 optical switch by exploiting vortex beam emitters based on silicon microrings with superimposed gratings.

A silicon-on-insulator microring with three superimposed gratings is proposed and characterized as a device enabling 3×3 optical switching based on orbital angular momentum and wavelength as switching domains. Measurements show penalties with respect to the back-to-back of <1 dB at a bit error rate of 10-9 for OOK traffic up to 20 Gbaud. Different switch configuration cases are implemented, with measured power penalty variations of less than 0.5 dB at bit error rates of 10-9. An analysis is also carried out to highlight the dependence of the number of switch ports on the design parameters of the multigrating microring.

High-extinction-ratio TE/TM selective Bragg grating filters on silicon-on-insulator.

We report on the design and fabrication of TE and TM polarization selective Bragg grating filters in the form of sinusoidal perturbations on the waveguide sidewall and etched holes on the top of the waveguide, respectively. Combining the two geometries on a silicon-on-insulator waveguide resulted in Bragg grating filters with high extinction ratios of approximately 60 dB.

Performance evaluation of analog signal transmission in an integrated optical vortex emitter to 3.6-km few-mode fiber system.

We experimentally demonstrate and evaluate the performance of an analog signal transmission system with photonic integrated optical vortex emitter and 3.6-km few-mode fiber (FMF) link using orbital angular momentum (OAM) modes. The fabricated photonic integrated device is capable of emitting vector optical vortices carrying well-defined and quantized OAM modes with topological charge l=-2 and 2. After propagating through 3.6-km FMF, we measure and assess the spurious free dynamic range of the second-order harmonic distortion. Moreover, we study the impact of nonlinearity-induced resonance wavelength shift of the optical vortex emitter on the analog link performance as increasing the input optical power.

Generation of photonic orbital angular momentum superposition states using vortex beam emitters with superimposed gratings.

An integrated approach to produce photonic orbital angular momentum (OAM) superposition states with arbitrary OAM spectrum has been demonstrated. Superposition states between two vector OAM modes have been achieved by integrating a superimposed angular grating in one silicon micro-ring resonator, with each mode having near equal weight. The topological charge difference between the two compositional OAM modes is determined by the difference between the numbers of elements in the two original gratings being superimposed, while the absolute values of the topological charge can be changed synchronously by switching WGM resonant wavelengths. This novel approach provides a scalable and flexible source for the OAM-based quantum information and optical manipulation applications.