Tetracosanuclear nickel complexes as effective catalysts for cycloaddition of carbon dioxide with epoxides.

A series of well-defined tetracosanuclear nickel complexes 3-7 facilely produced by one-pot synthesis were active catalysts for cycloaddition of CO2 and cyclohexene oxide (CHO). These nickel complexes were doughnut-like supramolecular coordination complexes involving eight repeating units, and each of them contains one Schiff base ligand and three nickel(II) ions. Notably, the 24-nuclear nickel cluster complex 3 in combination with nucleophilic additives was the most efficient catalyst to mediate CO2 coupling with CHO to generate CO2-based cis-cyclohexene carbonates. In addition to CO2/CHO cycloaddition, complex 3 was also found to effectively couple CO2 with other alicyclic epoxides, generating the corresponding cyclic carbonates. Additionally, kinetic investigations for CO2 cycloaddition of CHO using 3 were reported.

Bimetallic nickel complexes containing imidazole-based phenolate ligands as efficient catalysts for the copolymerization of carbon dioxide with epoxides.

The utilization of hexadentate imidazole-derived diamine-bisphenolate ligands to construct structurally well-defined bimetallic nickel catalysts that enable the mediation of the copolymerization of carbon dioxide with alicyclic epoxides was reported for the first time. A series of dinickel carboxylate/nitrophenolate complexes were facilely prepared through a one-pot procedure and their structures were fully determined by single crystal X-ray structural analysis. Dinickel complexes 1-10 were used as single-component catalysts, and were evaluated for the copolymerization of CO2 and cyclohexene oxide (CHO), for which acetato-incorporated complex 1 was proved to exhibit the best activity. Not only has the controllability of binickel catalyst 1 for CO2/CHO copolymerization been demonstrated, but also an "immortal" character for the same polymerization has been realized. Furthermore, detailed kinetic studies of polymerization catalysis of this type were undertaken, and the kinetics results revealed a first-order dependence on both Ni complex 1 and CHO concentrations. This is a successful example of the introduction of the easily accessible nitrogen-heterocycle group, the imidazole moiety, into phenolate ligands for the development of high-performance homogeneous catalysts towards the bimetallic complex-catalyzed copolymerization of CO2 and epoxides.

Creation of Chitosan-Based Nanocapsule-in-Nanofiber Structures for Hydrophobic/Hydrophilic Drug Co-Delivery and Their Dressing Applications in Diabetic Wounds.

Nanofiber meshes (NFMs) loaded with therapeutic agents are very often employed to treat hard-to-heal wounds such as diabetic wounds. However, most of the NFMs have limited capability to load multiple or hydrophilicity distinctive-therapeutic agents. The therapy strategy is therefore significantly hampered. To tackle the innate drawback associated with the drug loading versatility, a chitosan-based nanocapsule-in-nanofiber (NC-in-NF) structural NFM system is developed for simultaneous loading of hydrophobic and hydrophilic drugs. Oleic acid-modified chitosan is first converted into NCs by the developed mini-emulsion interfacial cross-linking procedure, followed by loading a hydrophobic anti-inflammatory agent Curcumin (Cur) into the NCs. Sequentially, the Cur-loaded NCs are successfully introduced into reductant-responsive maleoyl functional chitosan/polyvinyl alcohol NFMs containing a hydrophilic antibiotic Tetracycline hydrochloride. Having a co-loading capability for hydrophilicity distinctive agents, biocompatibility, and a controlled release property, the resulting NFMs have demonstrated the efficacy on promoting wound healing either in normal or diabetic rats.

Bimetallic Nickel Complexes as Effective and Versatile Catalysts for Copolymerization of Epoxides with Carbon Dioxide or Phthalic Anhydride: Catalysis and Kinetics.

This study reported three novel structurally well-characterized dihalide dinuclear nickel complexes containing benzotriazole-based 1,3-diamine-linked bisphenolate ligands, which were high-performance catalysts for ring-opening copolymerization (ROCOP) of cyclohexene oxide (CHO) and carbon dioxide (CO2). The dinickel diiodo 3 was shown to catalyze CO2 copolymerization of CHO with high activity (turnover frequency up to 2250 h-1), excellent selectivity (>99% polycarbonates, >99% carbonate repeated units), and good molecular weight controllability. Apart from CO2/CHO copolymerization, the most active complex 3 was found to effectively catalyze ROCOP of CHO with phthalic anhydride (PA). Not only has the controllable manner of 3 for PA/CHO copolymerization been proven but also a broad substrate scope for PA copolymerization of epoxides by the same complex has been achieved. Diverse terminal or internal epoxides were demonstrated to copolymerize PA by 3, producing the corresponding semiaromatic polyesters with good activity and excellent product selectivity. Kinetic studies for CHO copolymerization of CO2 or PA mediated by 3 were systematically investigated. For kinetics of PA/CHO copolymerization, it allowed us to propose the rate equation of -d[CHO]/dt = kp[3]1[PA]0[CHO]1, and such catalysis displayed a first-order dependence on both dinickel complex and CHO concentrations as well as a zero order for PA. This work offers a bimetallic dihalide nickel complex as an efficient and versatile catalyst for two different types of copolymerization catalysis.

Biodegradable Carbon Dioxide-Derived Non-Viral Gene Vectors for Osteosarcoma Gene Therapy.

Osteosarcoma often occurs in children and adolescents with high invasiveness and high mortality. Polo-like kinase 1 (PLK1) overexpressed in most tumors promotes cancer cell proliferation and transformation. PLK1 is considered as a therapeutic target for osteosarcoma. RNA interference-based therapies are employed to combat osteosarcoma through silencing PLK1 gene expression. However, the treatment results remain unsatisfactory due to the lack of a safe and efficient nonviral gene vector. To tackle this hurdle, biodegradable and CO2 -derivative cationic poly(vinylcyclohexene carbonates) (CPCHCs) are used as gene vectors to perform a siPLK1 therapeutic strategy for osteosarcoma treatment. Of those CPCHCs, CPCHC60 demonstrates the most excellent performance in gene transfection efficiency, endo-lysosome escaping, biodegradability, and biosafety. With the treatment of CPCHCs/siRNA nanoparticles, the expression level of PLK1 gene in osteosarcoma cells is significantly down-regulated. Subsequently, cells are arrested in the G2 /M phase and subsequently dead in the form of apoptosis, resulting in significant tumor regression both in vitro and in vivo. This study brings a new insight into the development of superior nonviral gene vectors for practical cancer treatment. Based on the results, the resulting nanoparticle-based gene drug formation is considered to have a highly successful chance in further translational nanomedicine applications.

Dinuclear Nickel Complexes Using Hexadentate Benzothiazole-Based Diamine-Bisphenolate Ligands: Highly Active Catalysts for Copolymerization of Carbon Dioxide with Epoxides.

We reported for the first time the utilization of hexadentate benzothiazole-based diamine-bisphenolate ligands to synthesize structurally well-characterized dinickel dicarboxylate complexes and studied their catalysis for copolymerization of carbon dioxide with epoxides. Dinickel carboxylate complexes having a 1,3-diamine-bridged backbone were demonstrated to be high-performance catalysts for alternating copolymerization of CO2 and cyclohexene oxide (CHO) with high product selectivity. Particularly, acetate-supported nickel complex 2 enabled us to promote such CO2-copolymerization of this kind with a maximum turnover frequency of up to 2600 h-1 and gave good molecular weight controllability under high-pressure conditions. It is worth noting that bimetallic Ni catalyst 2 was also capable of mediating the catalytic CO2-polymerization of alicyclic epoxides at atmospheric pressure. Kinetic investigations of CO2/CHO copolymerization by 2 allowed us to determine the rate equation of -d[CHO]/dt = kp[2]1[CHO]1, and such catalysis exhibited a first-order dependence on both dinickel complex and CHO concentrations.

Preparation of CO2 -Based Cationic Polycarbonate/Polyacrylonitrile Nanofibers with an Optimal Fibrous Microstructure for Antibacterial Applications.

Utilizing CO2 as one of the monomer resources, poly(vinylcyclohexene carbonates) (PVCHCs) are used as the precursor for preparing cationic PVCHCs (CPVCHCs) via thiol-ene click functionalization. Through the functionalization, CPVCHC-43 with a tertiary amine density of 43% relative to the backbone is able to display a significantly antibacterial ability against Staphylococcus aureus (S. aureus). Blending CPVCHC-43 with polyacrylonitrile (PAN), CPVCHC/PAN nanofiber meshes (NFMs) have been successfully prepared by electrospinning. More importantly, two crucial fibrous structural factors including CPVCHC/PAN weight ratio and fiber diameter have been systematically investigated for the effects on the antibacterial performance of the NFMs. Sequentially, a quaternization treatment has been employed on the NFMs with an optimal fibrous structure to enhance the antibacterial ability. The resulting quaternized NFMs have demonstrated the great biocidal effects against Gram-positive and Gram-negative bacteria. Moreover, the excellent biocompatibility of the quaternized NFMs have also been thoroughly evaluated and verified.

Carbon Dioxide-Derived Biodegradable and Cationic Polycarbonates as a New siRNA Carrier for Gene Therapy in Pancreatic Cancer.

Pancreatic cancer is an aggressive malignancy associated with poor prognosis and a high tendency in developing infiltration and metastasis. K-ras mutation is a major genetic disorder in pancreatic cancer patient. RNAi-based therapies can be employed for combating pancreatic cancer by silencing K-ras gene expression. However, the clinical application of RNAi technology is appreciably limited by the lack of a proper siRNA delivery system. To tackle this hurdle, cationic poly (cyclohexene carbonate) s (CPCHCs) using widely sourced CO2 as the monomer are subtly synthesized via ring-opening copolymerization (ROCOP) and thiol-ene functionalization. The developed CPCHCs could effectively encapsulate therapeutic siRNA to form CPCHC/siRNA nanoplexes (NPs). Serving as a siRNA carrier, CPCHC possesses biodegradability, negligible cytotoxicity, and high transfection efficiency. In vitro study shows that CPCHCs are capable of effectively protecting siRNA from being degraded by RNase and promoting a sustained endosomal escape of siRNA. After treatment with CPCHC/siRNA NPs, the K-ras gene expression in both pancreatic cancer cell line (PANC-1 and MiaPaCa-2) are significantly down-regulated. Subsequently, the cell growth and migration are considerably inhibited, and the treated cells are induced into cell apoptotic program. These results demonstrate the promising potential of CPCHC-mediated siRNA therapies in pancreatic cancer treatment.

Alternating Copolymerization of Carbon Dioxide with Epoxides Using Highly Active Dinuclear Nickel Complexes: Catalysis and Kinetics.

A novel series of well-defined dicarboxylate dinuclear nickel complexes containing benzotriazole based 1,3-diamine-bisphenolate (1,3-DiBTP) ligands were readily synthesized through a one-pot procedure, which were highly active single-component catalysts for copolymerization of CO2 and epoxides. X-ray structural determination of dinickel complexes 1-11 indicates that the DiBTP ligand acted as a N,O,N,N,O,N-hexadentate framework to chelate two nickel atoms, and two carboxylates are nonequivalently coordinated. The best benzoate-bonded dinickel catalyst 6 displayed the effective activity for both high-pressure and 1 atm CO2-copolymerization of cyclohexene oxide (CHO) in a controllable manner. Noteworthily, a high turnover frequency up to 9600 h-1 could be reached at 140 °C and a CO2 pressure of 20.7 bar utilizing a low catalyst loading of 0.01 mol %, and the same copolymerization conditions were capable of producing narrowly dispersed poly(cyclohexene carbonate) (PCHC) having >99% polycarbonate selectivity. In addition to CO2/CHO copolymerization, 4-vinyl-1,2-cyclohexene oxide or cyclopentene oxide was also applied to efficiently copolymerize CO2 under conditions of 80 °C and 20.7 bar initial CO2 pressure. Kinetic studies of CO2/CHO copolymerization catalyzed by 6 were investigated. Such polymerization revealed first-order dependence for both catalyst 6 and CHO concentrations, and the activation energy for PCHC generation by 6 is 57.69 kJ mol-1. A possible polymerization mechanism for CO2-copolymerization of CHO was proposed based on kinetics and structural studies of the obtained polycarbonates.

Ring-Opening Polymerization of ε-Caprolactone and Styrene Oxide-CO2 Coupling Reactions Catalyzed by Chelated Dehydroacetic Acid-Imine Aluminum Complexes.

A series of chelated dehydroacetic acid-imine-based ligands L1H~L4H was synthesized by reacting dehydroacetic acid with 2-t-butylaniline, (S)-1-phenyl-ethylamine, 4-methoxylbenzylamine, and 2-(aminoethyl)pyridine, respectively, in moderate yields. Ligands L1H~L4H reacted with AlMe3 in toluene to afford corresponding compounds AlMe2L1 (1), AlMe2L2 (2), AlMe2L3 (3), and AlMe2L4 (4). All the ligands and aluminum compounds were characterized by IR spectra, 1H and 13C NMR spectroscopy. Additionally, the ligands L1H~L4H and corresponding aluminum derivatives 1, 3, and 4 were characterized by single-crystal X-ray diffractometry. The catalytic activities using these aluminum compounds as catalysts for the ε-caprolactone ring-opening polymerization (ROP) and styrene oxide-CO2 coupling reactions were studied. The results show that increases in the reaction temperature and selective solvent intensify the conversions of ε-caprolactone to polycaprolactone. Regarding the coupling reactions of styrene oxide and CO2, the conversion rate is over 90% for a period of 12 h at 90 °C. This strategy dispenses the origination of cyclic styrene carbonates, which is an appealing concern because of the transformation of CO2 into an inexpensive, renewable and easy excess carbon feedstock.

Hierarchically Porous Carbon Materials from Self-Assembled Block Copolymer/Dopamine Mixtures.

Hierarchically porous carbon materials with interconnected frameworks of macro- and mesopores are desirable for electrochemical applications in biosensors, electrocatalysis, and supercapacitors. In this study, we report a facile synthetic route to fabricate hierarchically porous carbon materials by controlled macro- and mesophase separation of a mixture of polystyrene-block-poly(ethylene) and dopamine. The morphology of mesopores is tailored by controlling the coassembly of PS-b-PEO and dopamine in the acidic tetrahydrofuran-water cosolvent. HCl addition plays a critical role via enhancing the charge-dipole interactions between PEO and dopamine and suppressing the clustering and chemical reactions of dopamine in solution. As a result, subsequent drying can produce interpenetrated PS-b-PEO/DA mixtures without forming dopamine microsized crystallites. Dopamine oxidative polymerization induced by solvent annealing in NH4OH vapor enables the formation of percolating macropores. Subsequent pyrolysis to selectively remove the PS-b-PEO template from the complex can produce hierarchically porous carbon materials with interconnected frameworks of macro- and mesopores when pyrolysis is implemented at a low temperature or when DA is a minor component.

Synthesis and characterization of di-nuclear bis(benzotriazole iminophenolate) cobalt complexes: catalysis for the copolymerization of carbon dioxide with epoxides.

A family of di-nuclear bis(benzotriazole iminophenolate) (BiIBTP) cobalt complexes containing diverse ancillary carboxylate derivatives have been synthesized and structurally characterized. The one-pot synthesis of the BiIBTP ligand precursor with cobalt perchlorate salt (2.0 equiv.) and carboxylic acid derivatives (2.0 or 5.0 equiv.) in the presence of triethylamine (5.0 equiv.) under refluxing methanolic solution generated bimetallic di-carboxylate Co(ii)/Co(ii) complexes [(C83CBiIBTP)Co2(O2CR)2] (R = C6H5 (1), C6F5 (2), 4-CF3-C6H4 (3), 4-OMe-C6H4 (4), CF3 (5)) in ≧65% yields. Interestingly, the Co(ii)/Co(iii) mixed-valence complex 6 resulted from the treatment of 1 with silver perchlorate (1.0 equiv.) as the oxidizing agent under an O2-atmosphere in 50% yield. The crystal structure of 6 reveals an ionic and di-nuclear benzoate species composed of a cationic moiety formulated as [(C83CBiIBTP)Co2(O2CC6H5)2]+ and a counterbalanced perchlorate anion, and both metal atoms are attributed to hexa-coordinated cobalt ions with varied coordination environments. Catalysis results of CO2/epoxide copolymerization indicated that complex 1 was more efficient than 2-6 where compound 6 was shown to be the least active. Co complex 1 incorporating benzoate coligands was demonstrated to effectively catalyze the CO2-copolymerization of cyclohexene oxide (CHO), 4-vinyl-1,2-cyclohexene oxide or cyclopentene oxide, producing the associated CO2-based polycarbonates with >99% carbonate repeated units under optimal conditions. Not only the controllable character of complex 1 for CO2/CHO copolymerization is enabled, but also 1 has been shown to catalyze such a copolymerization in the "immortal" manner. Using the same di-cobalt catalyst in combination with excess ratios of neopentyl glycol (up to 150 equiv.) as the chain transfer agent could give low molecular weight poly(cyclohexene carbonate) polyols with monomodal molecular weight distributions. This work offers the facilely prepared di-nuclear cobalt complexes as catalysts for the efficient catalysis of CO2-copolymerization.

Mono- and dinuclear copper complexes coordinated on NNO-tridentate Schiff-base derivatives for copolymerization of cyclohexene oxide and cyclic anhydrides.

A series of bimetallic penta-coordinated copper complexes [Ln2Cu2(OAc)2] (1, 3-7), a mononuclear tetra-coordinated copper complex [LnCu(OAc)] (8 and 9), and a penta-coordinated copper complex [L2Cu(OAc)(H2O)] (10) were prepared by the reaction of Cu(OAc)2·H2O with a variety of NNO-tridentate Schiff-base ligands (L1-H-L9-H) in refluxing 95% ethanol, respectively. However, a dinuclear copper complex [(L2)2Cu2(OAc)2] (2) can be obtained from the treatment of L2-H with a stoichiometric amount of anhydrous Cu(OAc)2 in refluxing absolute EtOH under a dry nitrogen atmosphere. All of these copper complexes are active for the alternating copolymerization of cyclohexene oxide and cyclic anhydride, affording polyesters with moderate polydispersity. In particular, dinuclear copper complexes 1 and 2 performed satisfactorily to produce polyesters with controllable molecular weights and high ester linkages. This is the first example of well-defined copper acetate catalysts active for the copolymerization of cyclohexene oxide-phthalic anhydride or cyclohexene oxide-succinic anhydride which may be advantageous in terms of obviating the use of co-catalysts and low cost as well as an effective copolymerization for the formation of biodegradable polyesters in a controlled fashion.

Microporous 2D indium metal-organic frameworks for selective CO2 capture and their application in the catalytic CO2-cycloaddition of epoxides.

Four new 2D indium metal-organic frameworks (MOFs) (Me2NH2)[In(SBA)2] (1), (Me2NH2)[In(SBA)(BDC)] (2), (Me2NH2)[In(SBA)(BDC-NH2)] (3), and (NH4)3[In3Cl2(BPDC)5] (4), (H2SBA = 4,4'-sulfonyldibenzoic acid; H2BDC = 1,4-benzenedicarboxylic acid; H2BDC-NH2 = 2-amino-1,4-benzenedicarboxylic acid; H2BPDC = 4,4'-biphenyldicarboxylic acid) have been synthesized under solvothermal reaction conditions for compounds 1 to 3 and the DES (deep eutectic solvent) reaction has been attempted for compound 4. The structure of these MOFs has been determined by using single crystal X-ray diffraction study and all of theses four 2D monolayer framework with porous properties. The N2 gas sorption measurements indicated that Brunauer-Emmer-Teller (BET) and Langmuir surface areas of compound 1 are 207 and 301 m2 g-1, respectively, which is probably the first one having substantial gas uptake properties in the entire 2D In-MOF family to date. Furthermore, these new indium MOFs on the addition of n-Bu4NBr were active for the cycloaddition of CO2 and propylene oxide, generating propylene carbonates in high conversions under mild conditions. Particularly, the most active MOF 4 was found to efficiently couple CO2 with a series of terminal epoxides to give the corresponding cyclic organic carbonates with high selectivities.

Synthesis and characterization of trimetallic cobalt, zinc and nickel complexes containing amine-bis(benzotriazole phenolate) ligands: efficient catalysts for coupling of carbon dioxide with epoxides.

New trimetallic cobalt, nickel and zinc complexes 1-3 coordinated by amine-bis(benzotriazole phenolate) ligands and ancillary acetate groups have been developed for the use of CO2/epoxide coupling. All complexes were structurally characterized by single crystal X-ray crystallography; tri-Co complex 1 is the first solid-state example in which three different geometrical configurations exist in the same benzotriazole phenoxide metal complex. Tri-nuclear complexes 1 and 2 with cobalt and zinc metal centers were demonstrated to be very active catalysts for cycloaddition of cyclohexene oxide with CO2 in the presence of ammonium salt co-catalysts to give cis-cyclohexene carbonate under the conditions of 80 °C and 300 psi initial CO2 pressure. Particularly, tri-cobalt complex 1 was found to efficiently couple CO2 with epoxides showing broad substrate scope, producing the corresponding cyclic organic carbonates with good activities and high selectivities. This is a successful example of catalysis for cyclic carbonate synthesis using one cobalt(ii) complex as a homogeneous catalyst.

Copolymerization of Carbon Dioxide with Epoxides Catalyzed by Structurally Well-Characterized Dinickel Bis(benzotriazole iminophenolate) Complexes: Influence of Carboxylate Ligands on the Catalytic Performance.

A series of structurally well-defined dinickel carboxylate complexes based on the RBiIBTP derivatives [RBiIBTP = bis(benzotriazole iminophenolate), where R = 3C for the propyl-bridged backbone and 5C for the 2,2-dimethyl-1,3-propyl-bridged backbone] were synthesized and developed for copolymerization of CO2 and epoxides. The one-pot reactions of nickel perchlorate with the RBiIBTP-H2 proligands and an appropriate amount of carboxylic acid derivatives (CF3COOH or 4-X-C6H4CO2H; X = H, CF3, OMe) upon the addition of triethylamine in refluxing methanol (MeOH) afforded dinuclear nickel dicarboxylate complexes, which could be formulated as either [(RBiIBTP)Ni2(O2CCF3)2] (1 and 2) or [(RBiIBTP)Ni2(O2CC6H4-4-X)2] (3-7). The dinickel monobenzoate complexes [(RBiIBTP)Ni2(O2CPh)(ClO4)(H2O)] [R = 3C (8) and 5C (9)] were prepared by using a similar synthetic route in tetrahydrofuran under reflux with a ligand precursor to metal salt to benzoic acid ratio of 1:2:1 in the presence of NEt3. Recrystallization of neutral nickel perchlorate complex 8 in a saturated MeOH or ethanol (EtOH) solution gave ionic and alcohol-solvated monobenzoate bimetallic analogues [(3CBiIBTP)Ni2(O2CPh)(S)2]ClO4, where S = MeOH (10) and EtOH (11). Single-crystal X-ray crystallography of dinickel analogues 1-11 indicates that the BiIBTP scaffold performs as a N,O,N,N,O,N-hexadentate ligand to chelate two Ni atoms, and the ancillary carboxylate group adopts a bridging bidentate bonding mode. Catalysis for copolymerization of carbon dioxide (CO2) with cyclohexene oxide (CHO) by complexes 1-9 was systematically investigated, and the influence of carboxylate ligands on the catalytic behavior was also studied. Trifluoroacetate-ligated dinickel complex 1 efficiently catalyzed CO2 and CHO with a high turnover frequency (>430 h-1) in a controlled fashion, generating perfectly alternating poly(cyclohexenecarbonate) with large molecular weight (Mn > 50000 g/mol). In addition to CO2/CHO copolymerization, bimetallic complex 1 was found to effectively copolymerize CO2 with 4-vinyl-1,2-cyclohexene oxide (VCHO) or cyclopentene oxide, producing the high carbonate contents of poly(VCHC-co-VCHO)s and highly alternating poly(cyclopentene carbonate)s, respectively. This study also enabled us to compare the catalytic efficiency of using cyclic epoxides with different ring strains or functional groups as comonomers by the dinickel catalyst 1.

Metal complexes containing nitrogen-heterocycle based aryloxide or arylamido derivatives as discrete catalysts for ring-opening polymerization of cyclic esters.

The development of well-defined homogeneous catalysts for the ring-opening polymerization (ROP) of cyclic esters has made enormous progress over the past decade. This perspective focuses on some recent advances in the field of discrete metal complexes modified by various aryloxide or arylamido ligands bearing the nitrogen-containing heterocycle moiety, and their catalytic applications in ROP of lactones. It mainly highlights aryloxide/arylamido ligands that are directly installed by the N-heterocyclic group. The complex structure-ROP performance relationships and the observed trends with respect to their catalytic efficiency affected by ligand modifications are also discussed.

Dinuclear and Trinuclear Nickel Complexes as Effective Catalysts for Alternating Copolymerization on Carbon Dioxide and Cyclohexene Oxide.

A series of novel nickel complexes 1-9 supported by NNO-tridentate Schiff-base derivatives have been synthesized and characterized. Treatment of the pro-ligands [L(1)-H = 2,4-di-tert-butyl-6-(((2-(dimethylamino)ethyl)imino)methyl)phenol, L(2)-H = 2-(((2-(dimethylamino)ethyl)imino)methyl)-4,6-bis(2-phenylpropan-2-yl)phenol, L(3)-H = 2-(((2-(dimethylamino)ethyl)imino)methyl)phenol] with Ni(OAc)2·4H2O in refluxing ethanol afforded mono- or bimetallic nickel complexes {[(L(1))Ni(OAc)] (1); (L(2))Ni(OAc)] (2); (L(3))2Ni2(OAc)2(H2O)] (3)}. Alcohol-solvated trimetallic nickel acetate complexes {[(L(3))2Ni3(OAc)4(MeOH)2] (4); (L(3))2Ni3(OAc)4(EtOH)2] (5)} could be generated from the reaction of L(3)-H and anhydrous nickel(II) acetate with a ratio of 2:3 in refluxing anhydrous MeOH or EtOH. The reaction of nickel acetate tetrahydrate and L(4)-H to L(6)-H [L(4)-H = 2-(((2-(dimethylamino)ethyl)imino)methyl)-5-methoxyphenol, L(5)-H = 2-(((2-(dimethylamino)ethyl)imino)methyl)-4-methoxy-phenol, L(6)-H = 2-(((2-(dimethylamino)ethyl)imino)(phenyl)methyl)phenol] produced, respectively, the alcohol-free trinuclear nickel complexes {[(L(4))2Ni3(OAc)4] (7); [(L(5))2Ni3(OAc)4] (8); [(L(6))2Ni3(OAc)4] (9)} with the same ratio in refluxing EtOH under the atmospheric environment. Interestingly, recrystallization of [(L(3))2Ni3(OAc)4(MeOH)] (4) or [(L(3))2Ni3(OAc)4(EtOH)] (5) in the mixed solvent of CH2Cl2/hexane gives [(L(3))2Ni3(OAc)4] (6), which is isostructural with analogues 7-9. All bi- and trimetallic nickel complexes exhibit efficient activity and good selectivity for copolymerization of CO2 with cyclohexene oxide, resulting in copolymers with a high alternating microstructure possessing ≥99% carbonate-linkage content. This is the first example to apply well-defined trinuclear nickel complexes as efficient catalysts for the production of perfectly alternating poly(cyclohexene carbonate).

Mono-, di- and tetra-zinc complexes derived from an amino-benzotriazole phenolate ligand containing a bulkier N-alkyl pendant arm: synthesis, structure and catalysis for ring-opening polymerization of cyclic esters.

Zinc complexes constructed from the amino-modified benzotriazole phenol pro-ligand, 2-(2H-benzotriazol-2-yl)-6-((diisopropylamino)methyl)-4-(2,4,4-trimethylpentan-2-yl)phenol ((C8DIA)BTP-H, 1), were synthesized stepwise and structurally characterized. The reaction of (C8DIA)BTP-H (1) with one equivalent of diethyl zinc (ZnEt2) generates a dimeric and four-coordinated zinc complex, [(µ-(C8DIA)BTP)ZnEt]2 (2), which is doubly bridged by two phenolate groups of C8DIABTP ligands. Further reaction of 2 with benzyl alcohol (BnOH) in stoichiometric proportions affords a tetranuclear zinc benzylalkoxide complex [(µ-OBn)((C8DIA)BTP)Zn]4 (3) that possesses a saddle-shaped core with four µ2-bridging benzylalkoxy groups upon four Zn centres. Interestingly, the di-nuclear Zn alkoxide [(µ-OBn)((C8DIA)BTP)Zn(DMAP)]2 (4) could be prepared by treatment of 3 with a stoichiometric amount of 4-(dimethylamino)pyridine (DMAP). ZnEt2 reacts with two equivalents of 1 in the presence of DMAP (1.0 mol equiv.) to yield a five-coordinated mononuclear zinc complex, [((C8DIA)BTP)2Zn(DMAP)] (5). All complexes adopt an N,O-bidentate coordination mode from the phenoxy oxygen atom and benzotriazole nitrogen atom, in which the nitrogen atom of the pendent arm substituent is not coordinated to the zinc centre. Ring-opening polymerization of ε-caprolactone and ß-butyrolactone catalysed by 2 and 3 was investigated.

Facilely synthesized benzotriazole phenolate zirconium complexes as versatile catalysts for copolymerization of carbon dioxide with cyclohexene oxide and lactide polymerization.

A family of zirconium complexes containing bis-, tri- or tetra-BTP ligands (BTP = benzotriazole phenolate) were synthesized and structurally characterized. Treatment of Zr(O(i)Pr)4((i)PrOH) with 2.0 molar equivalents of 2-(2H-benzotriazol-2-yl)-4-(2,4,4-trimethylpentan-2-yl)phenol ((C8)BTP-H) or 2-(2H-benzotriazol-2-yl)-4,6-di-tert-butylphenol ((t-Bu)BTP-H) afforded zirconium alkoxide ([((C8)BTP)2Zr(O(i)Pr)2] (1); [((t-Bu)BTP)2Zr(O(i)Pr)2] (2)) in good yield. Similarly, the bis-adduct Zr amide [((t-Bu)BTP)2Zr(NMe2)2] (3) resulted from amine elimination of Zr(NMe2)4 as the metal precursor and (t-Bu)BTP-H as the pro-ligand under a similar synthetic method with a metal to ligand precursor ratio of 1:2 at 0 °C. The reaction of Zr(NMe2)4 with (C8)BTP-H or (t-Bu)BTP-H (4.0 mol equiv.) gave the tetra-adduct zirconium complex ([((C8)BTP)4Zr] (4); [((t-Bu)BTP)4Zr] (5)) in ≧70% yield. Interestingly, the tri-adduct Zr amide [((t-Bu)BTP)3Zr(NMe2)] (6) could be prepared by treatment of 3 with a stoichiometric amount of (t-Bu)BTP-H. The solid-state structure of 6 reveals a monomeric Zr(IV) amide with three (t-Bu)BTP ligands and one -NMe2 group, and the bonding modes between the BTP moiety and the metal centre adopt both N,O-bidentate and O-monodentate types. Zr complexes 1 and 4 incorporating sterically less bulky (C8)BTP ligands were demonstrated to efficiently catalyse not only copolymerization of epoxide with CO2 but also lactide polymerization. The tetra-BTP Zr catalyst 4 was able to copolymerize cyclohexene oxide and CO2 in a controllable manner, generating the high-molecular-weight copolymer (Mw > 10,000 g mol(-1)) and a high degree of carbonate linkages (>90%). Single-site zirconium alkoxide 1 is the most active catalyst for living lactide polymerization in solution among these complexes, giving poly(lactide)s with the expected molecular weights and narrow molecular weight distributions (PDI ≦ 1.25). This is a successful example of utilizing versatile benzotriazole phenolate Zr(IV) catalysts for either the production of biodegradable poly(lactide) or poly(cyclohexene carbonate-co-cyclohexene oxide).