ABSTRACT
The reuse of wastewater has been identified as an important initiative for the sustainable development of the environment; thus, the removal of secondary effluent organic matter (EfOM) to ensure the safety of reused wastewater is the key step and a subject of extensive research. In this study, Al2(SO4)3 and anionic polyacrylamide were selected as coagulant and flocculant, respectively, for the treatment of secondary effluent from a food-processing industry wastewater treatment plant to meet the standard regulatory specifications for water reuse. In this process, the removal efficiencies of chemical oxygen demand (COD), components with UV254, and specific ultraviolet absorbance (SUVA) were 44.61%, 25.13%, and 9.13%, respectively, with an associated reduction in chroma and turbidity. The fluorescence intensities (Fmax) of two humic-like components were reduced during coagulation, and microbial humic-like components of EfOM had a better removal efficiency because of a higher Log Km value of 4.12. Fourier transform infrared spectroscopy showed that Al2(SO4)3 could remove the protein fraction of the soluble microbial products (SMP) of EfOM by forming a loose SMP protein complex with enhanced hydrophobicity. Furthermore, flocculation reduced the aromaticity of secondary effluent. The cost of the proposed secondary effluent treatment was 0.034 CNY t-1 %COD-1. These results demonstrate that the process is efficient and economically viable for EfOM removal to realize food-processing wastewater reuse.
ABSTRACT
The production of excess sludge by the activated sludge system of wastewater treatment plants is a problem. In this study, the EPS characteristics on production and degradation were investigated in the real-scale food processing wastewater treatment system (i.e., a micro-aerobic reactor coupled with a membrane bioreactor (MAR-MBR)) with a treatment capacity of 150 t d-1, which could cater for the low production of excess sludge (i.e., 9 t·a-1; 76% moisture content). The total organic carbon concentrations in the different EPS fractions were in the following order: soluble EPS (S-EPS) < loosely bound EPS (LB-EPS) < tightly bound EPS (TB-EPS). Although the components (e.g., protein and humic acid-like substances) of each EPS fraction changed significantly throughout the MAR-MBR process owing to the low production of excess sludge, the degrees of change in S-EPS, LB-EPS, and TB-EPS were significantly different from the corresponding change in their relative molecular weights. Furthermore, the microbial community composition was beneficial for the release and degradation of EPS, and the regulation of gene functions via the MAR-MBR enhanced this process.
