Highly Porous Metal-Organic Framework Entrapped by Cobalt Telluride-Manganese Telluride as an Efficient Bifunctional Electrocatalyst.

The electrochemical conversion of oxygen holds great promise in the development of sustainable energy for various applications, such as water electrolysis, regenerative fuel cells, and rechargeable metal-air batteries. Oxygen electrocatalysts are needed that are both highly efficient and affordable, since they can serve as alternatives to costly precious-metal-based catalysts. This aspect is particularly significant for their practical implementation on a large scale in the future. Herein, highly porous polyhedron-entrapped metal-organic framework (MOF)-assisted CoTe2/MnTe2 heterostructure one-dimensional nanorods were initially synthesized using a simple hydrothermal strategy and then transformed into ZIF-67 followed by tellurization which was used as a bifunctional electrocatalyst for both the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). The designed MOF CoTe2/MnTe2 nanorod electrocatalyst exhibited superior activity for both OER (η = 220 mV@ 10 mA cm-2) and ORR (E1/2 = 0.81 V vs RHE) and outstanding stability. The exceptional achievement could be primarily credited to the porous structure, interconnected designs, and deliberately created deficiencies that enhanced the electrocatalytic activity for the OER/ORR. This improvement was predominantly due to the enhanced electrochemical surface area and charge transfer inherent in the materials. Therefore, this simple and cost-effective method can be used to produce highly active bifunctional oxygen electrocatalysts.

A Facile Fabrication of Ordered Mesoporous Carbons Derived from Phenolic Resin and Mesophase Pitch via a Self-Assembly Method.

Ordered and disordered mesoporous structures were synthesized by a self-assembly method using a mixture of phenolic resin and petroleum-based mesophase pitch as the starting materials, amphiphilic triblock copolymer F127 as a soft template, hydrochloric acid as a catalyst, and distilled water as a solvent. Then, mesoporous carbons were obtained via autoclave method at low temperature (60 °C) and then carbonization at a relatively low temperature (600 °C), respectively. X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), and transmission electron microscopy (TEM) analyses revealed that the porous carbons with a mesophase pitch content of approximately 10 wt% showed a highly ordered hexagonal mesostructure with a highly uniform pore size of ca. 5.0 nm. In addition, the mesoporous carbons prepared by self-assembly and low-temperature autoclave methods exhibited the amorphous or crystalline carbon structures with higher specific surface area (SSA) of 756 m2/s and pore volume of 0.63 cm3/g, depending on the synthesis method. As a result, mesoporous carbons having a high SSA were successfully prepared by changing the mixing ratio of mesophase pitch and phenolic resin. The electrochemical properties of as-obtained mesoporous carbon materials were investigated. Further, the OMC-meso-10 electrode delivered the maximum SC of about 241 F/g at an applied current density of 1 A/g, which was higher than those of the MC-10 (~104 F/g) and OMC-20 (~115 F/g).

Homogeneous Elongation of N-Doped CNTs over Nano-Fibrillated Hollow-Carbon-Nanofiber: Mass and Charge Balance in Asymmetric Supercapacitors Is No Longer Problematic.

The hurdle of fabricating asymmetric supercapacitor (ASC) devices using a faradic cathode and a double layer anode is challenging due to the required large amount of active mass of anodic material compared to that of the cathodic material during mass balancing due to the large difference in capacitance values of the two electrodes. Here, the problem is addressed by engineering a negative electrode that furnishes an ultrahigh capacitance. An in situ developed metal-organic framework (MOF)-based thermal treatment is adopted to grow highly porous N-doped carbon nanotubes (CNTs) containing submerged Co nanoparticles over nano-fibrillated electrospun hollow carbon nanofibers (HCNFs). The optimized CNT@HCNF-1.5 furnishes an ultrahigh capacitance approaching 712 F g-1 with excellent rate capability. The capacitance reported from this work is the highest for any carbonaceous material reported to date. The CNT@HCNF-1.5 is further used to fabricate symmetric supercapacitors (SSCs), as well as ASC devices. Remarkably, both the SSC and ASC devices furnish incredible performances in all aspects of SCs, such as a high energy density, long cycle life, and high rate capability, displaying decent practical applicability. The energy density of the SSC device reaches as high as 20.13 W h kg-1 , whereas that of ASC approaches 87.5 W h kg-1 .

Polypyrrole Nanotunnels with Luminal and Abluminal Layered Double Hydroxide Nanosheets Grown on a Carbon Cloth for Energy Storage Applications.

The structural design of transition metal-based electrode materials with gigantic energy storage capabilities is a crucial task. In this work, we report an assembly of thin layered double hydroxide (LDH) nanosheets arrayed throughout the luminal and abluminal parts of polypyrrole tunnels fastened onto both sides of a carbon cloth as a battery-type energy storage system. Electron microscopy images reveal that the resulting electrode (NiCo-LDH@H-PPy@CC, where H-PPy@CC represents carbon cloth-supported hollow polypyrrole fibers) is constructed by combining luminal and abluminal NiCo-LDH nanosheets onto a long polypyrrole tunnel on a carbon cloth. The primary sample shows an excellent specific capacity of 149.16 mAh g-1 at 1.0 mA cm-2, a remarkable rate capability of 80.45%, and comprehensive cyclic stability (93.4%). The improved performance is mainly attributed to the strategic organization of the electrode materials with superior Brunauer-Emmett-Teller (BET) surface area and conductivity. Moreover, an asymmetric supercapacitor device assembled with NiCo-LDH@H-PPy@CC and vanadium phosphate-incorporated carbon nanofiber (VPO@CNFs900) electrodes contributes a specific energy density of 32.42 Wh kg-1 at 3 mA cm-2 with a specific power density of 359.16 W kg-1. When the current density is increased by 6-fold, the specific power density reaches 1999.89 W kg-1 at a specific energy density of 20.06 Wh kg-1. This is a simple, cost-effective, and convenient synthetic strategy for the synthesis of porous nanosheet arrays assimilated into hollow fiber architectures, which can illuminate the ideal approach for the fabrication of novel materials with an immense potential for energy storage.

Preparation of Network-Structured Carbon Nanofiber Mats Based on PAN Blends Using Electrospinning and Hot-Pressing Methods for Supercapacitor Applications.

In this work, we prepared network-structured carbon nanofibers using polyacrylonitrile blends (PAN150 and PAN85) with different molecular weights (150,000 and 85,000 g mol-1) as precursors through electrospinning/hot-pressing methods and stabilization/carbonization processes. The obtained PAN150/PAN85 polymer nanofibers (PNFs; PNF-73, PNF-64 and PNF-55) with different weight ratios of 70/30, 60/40 and 50/50 (w/w) provided good mechanical and electrochemical properties due to the formation of physically bonded network structures between the blended PAN nanofibers during the hot-processing/stabilization processes. The resulting carbonized PNFs (cPNFs; cPNF-73, cPNF-64, and cPNF-55) were utilized as anode materials for supercapacitor applications. cPNF-73 exhibited a good specific capacitance of 689 F g-1 at 1 A g-1 in a three-electrode set-up compared to cPNF-64 (588 F g-1 at 1 A g-1) and cPNF-55 (343 F g-1 at 1 A g-1). In addition, an asymmetric hybrid cPNF-73//NiCo2O4 supercapacitor device also showed a good specific capacitance of 428 F g-1 at 1 A g-1 compared to cPNF-64 (400 F g-1 at 1 A g-1) and cPNF-55 (315 F g-1 at 1 A g-1). The cPNF-73-based device showed a good energy density of 1.74 W h kg-1 (0.38 W kg-1) as well as an excellent cyclic stability (83%) even after 2000 continuous charge-discharge cycles at a current density of 2 A g-1.

CoMnO2-Decorated Polyimide-Based Carbon Fiber Electrodes for Wire-Type Asymmetric Supercapacitor Applications.

In this work, we report the carbon fiber-based wire-type asymmetric supercapacitors (ASCs). The highly conductive carbon fibers were prepared by the carbonized and graphitized process using the polyimide (PI) as a carbon fiber precursor. To assemble the ASC device, the CoMnO2-coated and Fe2O3-coated carbon fibers were used as the cathode and the anode materials, respectively. Herein, the nanostructured CoMnO2 were directly deposited onto carbon fibers by a chemical oxidation route without high temperature treatment in presence of ammonium persulfate (APS) as an oxidizing agent. FE-SEM analysis confirmed that the CoMnO2-coated carbon fiber electrode exhibited the porous hierarchical interconnected nanosheet structures, depending on the added amount of APS, and Fe2O3-coated carbon fiber electrode showed a uniform distribution of porous Fe2O3 nanorods over the surface of carbon fibers. The electrochemical properties of the CoMnO2-coated carbon fiber with the concentration of 6 mmol APS presented the enhanced electrochemical activity, probably due to its porous morphologies and good conductivity. Further, to reduce the interfacial contact resistance as well as improve the adhesion between transition metal nanostructures and carbon fibers, the carbon fibers were pre-coated with the Ni layer as a seed layer using an electrochemical deposition method. The fabricated ASC device delivered a specific capacitance of 221 F g-1 at 0.7 A g-1 and good rate capability of 34.8% at 4.9 A g-1. Moreover, the wire-type device displayed the superior energy density of 60.2 Wh kg-1 at a power density of 490 W kg-1 and excellent capacitance retention of 95% up to 3000 charge/discharge cycles.

Oxalic acid assisted rapid synthesis of mesoporous NiCo2O4 nanorods as electrode materials with higher energy density and cycle stability for high-performance asymmetric hybrid supercapacitor applications.

In this study, mesoporous nickel cobaltite (NiCo2O4) nanorods as electrode materials for high-performance hybrid supercapacitor were fabricated onto Ni foam by a simple and cost effective oxalic acid (OA) assisted rapid co-precipitation method. The effects of different metal precursors (NCO-Nitrate, NCO-Chloride and NCO-Acetate) on the electrochemical capacitive properties were studied. FE-SEM analysis confirmed that all samples exhibited highly dense mesoporous NiCo2O4 nanorods vertically grown on the surface of Ni foam with excess accessible surfaces and unique sizes and morphologies. The resultant NiCo2O4 nanorod electrodes (for NCO-Nitrate, NCO-Chloride and NCO-Acetate) delivered the maximum specific capacitances of 790, 784, 776 F g-1 at the current density of 1 A g-1 with ultra-high capacitance retention of 82.27, 81.63 and 81.71% even at 20 A g-1 and excellent cyclic stability of 84.25, 83.33 and 83.24% capacitance retention at 5 A g-1 after 5000 cycles. The asymmetric supercapacitor (ASC) device was also sandwiched by using NCO-Nitrate as positive electrode and N-doped graphene hydrogel (NGH) as negative electrode. The fabricated ASC device delivered superior energy density (42.5 W h kg-1) at high power density (746.34 W kg-1) with excellent long cyclic stability (90% initial capacitance retention after 5000 cycles at 5 A g-1).

Introduction of a Program to Improve the Information Sharing System of Food Allergy Patients.

Although the symptoms of food allergy are diverse and sometimes dangerous to life, we have not been able to effectively share information on patients' food allergies. In this study, we developed a program to prescribe the allergic formula for each patient and to establish a series of processes for safe allergenic meal delivery based on the standards and guidelines of food allergy management. We then assessed the utility of the "introduction of food allergy program" by comparing the number of allergic prescriptions before and after the program application for inpatients. Through the development and introduction of the program, all hospital staffs, including medical staff and dieticians, can share information on food allergy patients. Systematic management of food allergy patients from doctor's prescriptions has provided the basis for safe meal preparation.

Hierarchically Assembled Nanofibers Created by a Layer-by-Layer Self-Assembly.

We report the hierarchically assembled nanofibers created by LbL self-assembly depending on the PSS-PAA fraction in the blend solutions and pH during bulid-up of the PAH/(PSS-PAA) multilayer films. The multilayer [(PEI/blend)/(PAH/blend)4] films with ρPAA (PSS-PAA fraction in the blend solutions) = 0.0 in the blend solution exhibited surface morphologies of randomly isolated globular clusters, while at ρPAA = 0.75, worm-like morphologies were observed. Interestingly, the multilayer [(PEI/blend)/(PAH/blend)4 films with ρPAA = 0.9 exhibited unique fibrous morphologies with the diameter of about 50 nm at narrower pH range from 3.5 to 4.2, but also the fiber diameter distribution was narrower. Based on the thickness from the X-ray reflectivity, the thickness of the one bilayer multilayer film seemed to be 8.6 nm. The 3 bilayers multilayer film seemed to be formed as islands with very large roughness. The crystal sizes of the 3 bilayers and 5 bilayers multilayer films were about 71 nm and 123 nm, respectively. The resultant films were characterized using atomic force microscopy (AFM) and real-time in situ X-ray scattering measurements.

Facile Synthesis of Core/Shell-like NiCo2O4-Decorated MWCNTs and its Excellent Electrocatalytic Activity for Methanol Oxidation.

The design and development of an economic and highly active non-precious electrocatalyst for methanol electrooxidation is challenging due to expensiveness of the precursors as well as processes and non-ecofriendliness. In this study, a facile preparation of core-shell-like NiCo2O4 decorated MWCNTs based on a dry synthesis technique was proposed. The synthesized NiCo2O4/MWCNTs were characterized by infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and selected area energy dispersive spectrum. The bimetal oxide nanoparticles with an average size of 6 ± 2 nm were homogeneously distributed onto the surface of the MWCNTs to form a core-shell-like nanostructure. The NiCo2O4/MWCNTs exhibited excellent electrocatalytic activity for the oxidation of methanol in an alkaline solution. The NiCo2O4/MWCNTs exhibited remarkably higher current density of 327 mA/cm(2) and a lower onset potential of 0.128 V in 1.0 M KOH with as high as 5.0 M methanol. The impressive electrocatalytic activity of the NiCo2O4/MWCNTs is promising for development of direct methanol fuel cell based on non-Pt catalysts.