ABSTRACT
Polypropylene (PP) is used as a housing material in automotive headlamps but can cause fogging as a result of absorbed moisture and temperature differences between the exterior and interior of the housing. In this study, PP was combined with a graphene/montmorillonite hybrid (MMT-G) to yield a nanocomposite with reduced moisture absorption. Crucially, the modified nanofiller had low hydrophilicity and good compatibility with the PP matrix. Notably, the water contact angle of the MMT-G improved by 676%. Furthermore, the maximum moisture absorption of the PP/MMT-G nanocomposites was reduced by up to 11.22% compared to that of commercial PP composites, and the weight of the headlamp housing was decreased by 3.6%. Therefore, the designed nanocomposites are expected to help mitigate headlamp fogging while slightly reducing the housing weight.
ABSTRACT
This study investigated the service life prediction of fluorocarbon elastomers that are used in automotive vapor fuel hoses under thermal environments. The changes in mechanical properties such as the tensile strength, elongation, compression set (CS), and hardness according to thermal aging were investigated for two types of ternary fluoroelastomers. Destructive tests of the tensile strength and elongation showed large variations in the mechanical properties under the same condition because there is no continuity of samples. In contrast, nondestructive tests of the CS and hardness showed little variations in the mechanical properties under the same condition. The elongation, CS, and hardness were selected as the physical parameters for service life prediction as they showed a tendency according to the aging temperature, which is an accelerating factor. The effective activation energy derived using each physical parameter was 74.91-159.6 kJ mol-1, and the service life was 17.8-140 × 103 h based on B10. In this study, hardness, which has a small deviation between samples, is considered appropriate as mechanical parameter for predicting the service lifetime.
ABSTRACT
Polyamide 46 (PA46) is used in various automotive parts because of its excellent heat resistance and mechanical properties. This study aims to improve the frictional properties of PA46 using the lubricating ability of graphene. Nanocomposites are prepared via two mixing methods: Graphene powder is compounded directly with PA46 pellets through a twin-screw extruder, or PA46 powder is added to graphene dispersion for self-adsorption, and subsequently, it is dried and compounded with PA46 through the twin-screw extruder. Application of the nanocomposite in the friction field is evaluated via the pin-on-disk method. The coefficient of friction of the nanocomposite prepared by self-adsorption is lower than that of the nanocomposite prepared by direct compounding. The mechanical properties of the nanocomposite fabricated by self-adsorption are superior to those of other materials. This can be attributed to the uniform dispersion of graphene and the strong attractive force between the PA46 matrix and graphene.
