Hyaluronan biofilms reinforced with partially deacetylated chitin nanowhiskers: Extraction, fabrication, in-vitro and antibacterial properties of advanced nanocomposites.

Fabrication of nanocomposite biofilms with enhanced mechanical and antibacterial properties was successfully achieved from hyaluronan (HA) and partially deacetylated chitin nanowhiskers (ChNWs) by a casting-evaporation method. The hydrolysis process of chitin showed an important role in the dimensions, stability, and the crystallinity of extracted ChNWs in a time-dependent manner. The volume fraction of ChNWs nanofiller varying from (0.001 to 0.5) exhibited a great influence on the mechanical properties of the biofilms (young modulus, strength) was enhanced by the high load-bearing capacity of NWs compared with net HA film. The antibacterial activity of the nanocomposite biofilms exhibited significant bactericidal activity against different types of bacteria (-/+ gram). HA/ChNWs Nanocomposite biofilms did not show any toxicity against normal human dermal fibroblasts (NHDF) and human primary osteogenic sarcoma (Saos-2) cell lines. The new biofilms with unique properties like edibleness, environmental friendliness, high mechanical properties, antibacterial performance, and non-cytotoxicity that could be used in skin tissue regenerations, and drug delivery applications.

Chitosan-glucan complex hollow fibers reinforced collagen wound dressing embedded with aloe vera. Part I: Preparation and characterization.

Collagen (CO)/chitosan-glucan complex (CSGC) hollow fibers encapsulated aloe vera (AV) dressing scaffold (CO/CSGC@AV) were fabricated for the first time by the freeze-dried process. Extraction process, morphology, mechanical properties, pore size, porosity, swelling ability, and degradation behavior of composites scaffold were investigated. CSGC hollow fibers were extracted from mycelium of Schizophyllum commune CSGC hollow fiber exhibited inner diameter of (600 ±â€¯250 nm) and outer fiber diameter of (2.5 ±â€¯0.5 µm). The results of swelling and hydrolytic degradation studies demonstrated that the physicochemical of CO/CSGC@AV was significantly enhanced by CSGC in a concentration-dependent manner. The mechanical property of the CO/CSGC@AV was improved after encapsulated AV into CSGC hollow fibers compared with native CO. The pore size and porosity of the CO/CSGC@AV were slightly decreased in the presence of AV. All these results suggested that the new dressing scaffold has a potential for clinical skin regeneration, particularly for infected chronic wounds and ulcers.

Formation of Layered Proton-Conducting Zirconium and Titanium Organophosphonates by Topotactic Reaction: Physicochemical Properties, Proton Dynamics, and Atomic-Resolution Structure.

A series of new zirconium and titanium phosphates-organophosphonates, in which the organophosphonate moiety is functionalized with a sulfo group, was prepared by a topotactic reaction involving the gamma modification of zirconium or titanium hydrogen phosphate with 2-bis(phosphonomethyl)amino-ethan-1-sulfonic acid (H4TDP). H4TDP represents a new type of functionalizing agent, which can be easily prepared by a Moedritzer-Irani reaction from taurine (2-aminoethanesulfonic acid). The gamma modification of zirconium hydrogen phosphate (γ-ZrP) with H4TDP provides mixed phosphate-organophosphonate compounds with the formula Zr(PO4)(H2PO4)1-2x(H2TDP)x·yH2O, where x = 0.15, 0.34, 0.45, and is controlled by the γ-ZrP/H4TDP ratio in the starting mixture. On the contrary, by the topotactic gamma modification of titanium hydrogen phosphate (γ-TiP) with H4TDP, only one product with the formula Ti(PO4)(H2PO4)1-2z(H2TDP)z·yH2O, where z = 0.41 ± 0.01, was obtained regardless of the composition of the starting mixture. The synthesized compounds were characterized by elemental analysis, thermogravimetric analysis, energy-dispersive X-ray analysis, and infrared spectroscopy. The way the topotactic reaction proceeds and how the grafted organophosphonate groups are bonded to the layers of the host structure were suggested on the basis of the solid-state NMR data. It was found that the grafted moieties are spread evenly in the host layers among the hydrogen phosphate groups. The obtained solids are able to intercalate basic molecules, as was proved by the intercalation reactions of the zirconium series with butylamine. The amount of intercalated butylamine increases with increasing x. It is known that both host compounds, γ-ZrP and γ-TiP, are protonic conductors. It was found that the incorporation of H2TDP increases conductivity of the zirconium compound when x = 0.15, but further incorporation of H2TDP into the γ-ZrP host structure leads to a decrease of conductivity. This behavior is explained on the basis of the 1H MAS and the 1H-1H EXSY NMR data.

An efficient 2D 11B-11B solid-state NMR spectroscopy strategy for monitoring covalent self-assembly of boronic acid-derived compounds: the transformation and unique architecture of bortezomib molecules in the solid state.

The difficulty in the prediction of the complicated solid-state structure of boronic acid derivatives, resulting from the complex pathway of reversible covalent interactions, represents a significant obstacle to the development of a new generation of advanced supramolecular systems such as covalent organic frameworks of efficient anticancer drugs. In this contribution, various 2D 11B-11B solid-state NMR correlation techniques supported by DFT calculations were explored to formulate a reliable tool for monitoring the covalent assembly of boronic acid residues in the solid state. This way, the self-condensation of bortezomib molecules was investigated, different local constitutions of boroxine motifs were unveiled, and the previously unreported boroxine structures of bortezomib polymorphs exhibiting secondary coordination were discovered and described in detail. The recorded 11B NMR parameters responded sensitively to subtle changes in the local geometries, which were reliably interpreted and directly visualized by the DFT calculations. A uniform 2.6 Å distance in bortezomib 11B-11B spin pairs was conclusively identified by the through-space 11B-11B double-quantum (DQ) coherence build-up curves, whereas distinct 2D 11B-11B DQ correlation patterns revealed unique boroxine structures existing in the crystalline as well as amorphous state. The boroxine rings were found to be internally stabilized through the transformation of the trigonal boron sites toward tetrahedral geometry, as the secondary five-membered rings were formed. This way, the nature of bortezomib polymorphism is disclosed, and an efficient strategy for exploring the assembly of boronic acid derivatives in the solid state, for which no crystallographic data are available, is thus demonstrated.

NMR crystallography of monovalent cations in inorganic matrixes: Li(+) siting and the local structure of Li(+) sites in ferrierites.

(7)Li-(7)Li correlation MAS NMR spectroscopy, interpreted using periodic DFT including molecular dynamics conformational sampling of Li(+) sites, is employed to obtain the siting of Li(+) at exchangeable positions of ferrierites and the local structure of these Li(+) sites. The former is controlled by the Al siting in the zeolite framework.

'Wax bloom' on beeswax cultural heritage objects: Exploring the causes of the phenomenon.

The term 'wax bloom' is used to describe a thin whitish crystalline layer that develops on the surface of beeswax objects under specific conditions. This phenomenon is undesirable, especially in the cases of objects with aesthetic or informational value, such as wax sculptures or historical seals. A combination of solid-state NMR and FTIR measurements allowed to obtain fairly detailed insight into the problem and to suggest a probable mechanism of its development. Secondary crystallization of unsaturated hydrocarbons from beeswax was determined as a primary cause. After the macroscopic solidification of beeswax from the melt, these molecules remain for months in a highly mobile, liquid-like state. This facilitates their diffusion to the surface, where they eventually crystallize, forming the 'wax bloom' effect. Although these results are of particular interest with respect to the conservation of beeswax artifacts, they are relevant to this material in general and help with understanding its unique properties.