An unprecedented roll-off ratio in high-performing red TADF OLED emitters featuring 2,3-indole-annulated naphthalene imide and auxiliary donors.

The capability of organic emitters to harvest triplet excitons via a thermally activated delayed fluorescence (TADF) process has opened a new era in organic optoelectronics. Nevertheless, low brightness, and consequently an insufficient roll-off ratio, constitutes a bottleneck for their practical applications in the domain of organic light-emitting diodes (OLEDs). To address this formidable challenge, we developed a new design of desymmetrized naphthalimide (NMI) featuring an annulated indole with a set of auxiliary donors on its periphery. Their perpendicular arrangement led to minimized HOMO-LUMO overlap, resulting in a low energy gap (ΔE ST = 0.05-0.015 eV) and efficient TADF emission with a photoluminescence quantum yield (PLQY) ranging from 82.8% to 95.3%. Notably, the entire set of dyes (NMI-Ind-TBCBz, NMI-Ind-DMAc, NMI-Ind-PXZ, and NMI-Ind-PTZ) was utilized to fabricate TADF OLED devices, exhibiting yellow to red electroluminescence. Among them, red-emissive NMI-Ind-PTZ, containing phenothiazine as an electron-rich component, revealed predominant performance with a maximum external quantum efficiency (EQE) of 23.6%, accompanied by a persistent luminance of 38 000 cd m-2. This results in a unique roll-off ratio (EQE10 000 = 21.6%), delineating a straightforward path for their commercial use in lighting and display technologies.

Regioisomerism vs Conformation: Impact of Molecular Design on the Emission Pathway in Organic Light-Emitting Device Emitters.

Despite the design and proposal of several new structural motifs as thermally activated delayed fluorescent (TADF) emitters for organic light-emitting device (OLED) applications, the nature of their interaction with the host matrix in the emissive layer of the device and their influence on observed photophysical outputs remain unclear. To address this issue, we present, for the first time, the use of up to four regioisomers bearing a donor-acceptor-donor electronic structure based on the desymmetrized naphthalene benzimidazole scaffold, equipped with various electron-donating units and possessing distinguished conformational lability. Quantum chemical calculations allow us to identify the most favorable conformations adopted by the electron-rich groups across the entire pool of regioisomers. These conformations were then compared with conformational changes caused by the interaction of the emitter with the Zeonex and 4,4'-bis(N-carbazolyl)-1,1'-biphenyl (CBP) matrices, and the correlation with observed photophysics was monitored by UV-vis absorption and steady-state photoluminescence spectra, combined with time-resolved spectroscopic techniques. Importantly, a CBP matrix was found to have a significant impact on the conformational change of regioisomers, leading to unique TADF emission mechanisms that encompass dual emission and inversion of the singlet-triplet excited-state energies and result in the enhancement of TADF efficiency. As a proof of concept, regioisomers with optimal donor positions were utilized to fabricate an OLED, revealing, with the best-performing dye, an external quantum emission of 11.6%, accompanied by remarkable luminance (28,000 cd/m2). These observations lay the groundwork for a better understanding of the role of the host matrix. In the long term, this new knowledge can lead to predicting the influence of the host matrix and adopting the structure of the emitter in a way that allows the development of highly efficient and efficient OLEDs.

Salicylideneaniline/Dithienylethene Hybrid Molecular Switches: Design, Synthesis, and Photochromism.

A hybrid molecular switch comprising salicylideneaniline (SA) and dithienylethene (DTE) moieties around a single benzene ring is reported. Due to an interplay between solvent-assisted enol-keto tautomerization in the former moiety and photochromic electrocyclization in the latter, this dithienylbenzene derivative was found to be photoresponsive at room temperature with a thermally stable closed form. The main photoproduct featuring ring-closed DTE and keto-enamine SA structures could be isolated and converted back to the starting material by irradiation with visible light. The optical properties of the potential structures involved in the overall process were characterized by using density functional theory (DFT) calculations in good agreement with the measured data. The reversibility of the conversion could be tuned by the presence of donor and acceptor substituents, while the introduction of the imine in the form of a benzothiazole moiety enabled photochemistry even in nonprotic solvents.

Facile Functionalization of Ambipolar, Nitrogen-Doped PAHs toward Highly Efficient TADF OLED Emitters.

Despite promising optoelectronic features of N-doped polycyclic aromatic hydrocarbons (PAHs), their use as functional materials remains underdeveloped due to their limited post-functionalization. Facing this challenge, a novel design of N-doped PAHs with D-A-D electronic structure for thermally activated delayed fluorescence (TADF) emitters was performed. Implementing a set of auxiliary donors at the meta position of the protruding phenyl ring of quinoxaline triggers an increase in the charge-transfer property simultaneously decreasing the delayed fluorescence lifetime. This, in turn, contributes to a narrow (0.04-0.28 eV) singlet-triplet exchange energy split (ΔEST) and promotes a reverse intersystem crossing transition that is pivotal for an efficient TADF process. Boosting the electron-donating ability of our N-PAH scaffold leads to excellent photoluminescence quantum yield that was found in a solid-state matrix up to 96% (for phenoxazine-substituted derivatives, under air) with yellow or orange-red emission, depending on the specific compound. Organic light-emitting diodes (OLEDs) utilizing six, (D-A)-D, N-PAH emitters demonstrate a significant throughput with a maximum external quantum efficiency of 21.9% which is accompanied by remarkable luminance values which were found for all investigated devices in the range of 20,000-30,100 cd/m2 which is the highest reported to date for N-doped PAHs investigated in the OLED domain.

V-shaped donor-acceptor organic emitters. A new approach towards efficient TADF OLED devices.

We report the synthesis and characterization of a series of donor-acceptor TADF emitters with a new architecture, where the donor moiety and the dibenzazepine-based acceptor moiety are separated by a phenylene linker in a V-shaped spatial arrangement. Such spatial separation and electronic decoupling between the donor and the acceptor moieties leads to low singlet-triplet energy gaps and favors efficient exciton up-conversion.

Chromophore hydrolysis and release from photoactivated rhodopsin in native membranes.

For sustained vision, photoactivated rhodopsin (Rho*) must undergo hydrolysis and release of all-trans-retinal, producing substrate for the visual cycle and apo-opsin available for regeneration with 11-cis-retinal. The kinetics of this hydrolysis has yet to be described for rhodopsin in its native membrane environment. We developed a method consisting of simultaneous denaturation and chromophore trapping by isopropanol/borohydride, followed by exhaustive protein digestion, complete extraction, and liquid chromatography-mass spectrometry. Using our method, we tracked Rho* hydrolysis, the subsequent formation of N-retinylidene-phosphatidylethanolamine (N-ret-PE) adducts with the released all-trans-retinal, and the reduction of all-trans-retinal to all-trans-retinol. We found that hydrolysis occurred faster in native membranes than in detergent micelles typically used to study membrane proteins. The activation energy of the hydrolysis in native membranes was determined to be 17.7 ± 2.4 kcal/mol. Our data support the interpretation that metarhodopsin II, the signaling state of rhodopsin, is the primary species undergoing hydrolysis and release of its all-trans-retinal. In the absence of NADPH, free all-trans-retinal reacts with phosphatidylethanolamine (PE), forming a substantial amount of N-ret-PE (∼40% of total all-trans-retinal at physiological pH), at a rate that is an order of magnitude faster than Rho* hydrolysis. However, N-ret-PE formation was highly attenuated by NADPH-dependent reduction of all-trans-retinal to all-trans-retinol. Neither N-ret-PE formation nor all-trans-retinal reduction affected the rate of hydrolysis of Rho*. Our study provides a comprehensive picture of the hydrolysis of Rho* and the release of all-trans-retinal and its reentry into the visual cycle, a process in which alteration can lead to severe retinopathies.

Linear conjugated polymer photocatalysts with various linker units for photocatalytic hydrogen evolution from water.

Polymer photocatalysts have shown potential for light-driven hydrogen evolution from water. Here we studied the relative importance of the linker type in two series of conjugated polymers based on dibenzo[b,d]thiophene sulfone and dimethyl-9H-fluorene. The alkenyl-linked polymers were found to be more active photocatalysts than their alkyl and alkyne-linked counterparts. The co-polymer of dibenzo[b,d]thiophene sulfone and 1,2-diphenylethene has a hydrogen evolution rate of 3334 µmol g-1 h-1 and an external quantum efficiency of 5.6% at 420 nm.

Tandem rigidification and π-extension as a key tool for the development of a narrow linewidth yellow hyperfluorescent OLED system.

Hyperfluorescence (HF), a relatively new phenomenon utilizing the transfer of excitons between two luminophores, requires careful pairwise tuning of molecular energy levels and is proposed to be the crucial step towards the development of new, highly effective OLED systems. To date, barely few HF yellow emitters with desired narrowband emission but moderate external quantum efficiency (EQE < 20%) have been reported. This is because a systematic strategy embracing both Förster resonance energy transfer (FRET) and triplet to singlet (TTS) transition as complementary mechanisms for effective exciton transfer has not yet been proposed. Herein, we present a rational approach, which allows, through subtle structural modification, a pair of compounds built from the same donor and acceptor subunits, but with varied communication between these ambipolar fragments, to be obtained. The TADF-active dopant is based on a naphthalimide scaffold linked to the nitrogen of a carbazole moiety, which through the introduction of an additional bond leads not only to π-cloud enlargement, but also rigidifies and inhibits the rotation of the donor. This structural change prevents TADF, and guides bandgaps and excited state energies to simultaneously pursue FRET and TTS processes. New OLED devices utilizing the presented emitters show excellent external quantum efficiency (up to 27%) and a narrow full width at half maximum (40 nm), which is a consequence of very good alignment of energy levels. The presented design principles prove that only a minor structural modification is needed to obtain commercially applicable dyes for HF OLED devices.

Simulation and analysis of the relaxation dynamics of a photochromic furylfulgide.

Furylfulgides, a class of photochromic organic compounds, show a complex system of photoinduced reactions. In the present study, the excited-state dynamics of the Eα and Eß isomers of a representative furylfulgide is modelled with the use of nonadiabatic molecular dynamics simulations. Moreover, a pattern recognition algorithm is employed in order to automatically identify relaxation pathways, and to quantify the photoproduct distributions. The simulation results indicate that, despite differing only in the orientation of the furyl group, the two isomers show markedly different photochemical behaviour. The predominant Eα isomer undergoes photocyclisation with a quantum yield (QY) of 0.27 ± 0.10. For this isomer, the undesired E → Z photoisomerisation around the central double bond represents a minor side reaction, with a QY of 0.09 ± 0.07. In contrast, the minority Eß isomer, which is incapable of photocyclisation, undergoes efficient E → Z photoisomerisation, with a QY as high as 0.56 ± 0.14. The relaxation kinetics and the photoproduct distributions are interpreted in the light of the available experimental data.

Modular Nitrogen-Doped Concave Polycyclic Aromatic Hydrocarbons for High-Performance Organic Light-Emitting Diodes with Tunable Emission Mechanisms.

Although bowl-shaped N-pyrrolic polycyclic aromatic hydrocarbons (PAHs) can achieve excellent electron-donating ability, their application for optoelectronics is hampered by typically low photoluminescence quantum yields (PLQYs). To address this issue, we report the synthesis and characterization of a series of curved and fully conjugated nitrogen-doped PAHs. Through structural modifications to the electron-accepting moiety, we are able to switch the mechanism of luminescence between thermally activated delayed fluorescence (TADF) and room-temperature phosphorescence (RTP), and to tune the overall PLQY in the range from 9 % to 86 %. As a proof of concept, we constructed solid-state organic light-emitting diode (OLED) devices, which has not been explored to date in the context of concave N-doped systems being TADF/RTP emitters. The best-performing dye, possessing a peripheral trifluoromethyl group adjacent to the phenazine acceptor, exhibits yellow to orange emission with a maximum external quantum efficiency (EQE) of 12 %, which is the highest EQE in a curved D-A embedded N-PAH to date.

Simulation and Analysis of the Transient Absorption Spectrum of 4-(N,N-Dimethylamino)benzonitrile (DMABN) in Acetonitrile.

4-(N,N-Dimethylamino)benzonitrile (DMABN) is a well-known model compound for dual fluorescence-in sufficiently polar solvents, it exhibits two distinct fluorescence emission bands. The interpretation of its transient absorption (TA) spectrum in the visible range is the subject of a long-standing controversy. In the present study, we resolve this issue by calculating the TA spectrum on the basis of nonadiabatic molecular dynamics simulations. An unambiguous assignment of spectral signals to specific excited-state structures is achieved by breaking down the calculated spectrum into contributions from twisted and nontwisted molecular geometries. In particular, the much-discussed excited-state absorption band near 1.7 eV (ca. 700 nm) is attributed to the near-planar locally excited (LE) minimum on the S1 state. On the technical side, our study demonstrates that the second-order approximate coupled cluster singles and doubles (CC2) method can be used successfully to calculate the TA spectra of moderately large organic molecules, provided that the system in question does not approach a crossing between the lowest excited state and the singlet ground state within the time frame of the simulation.

Theoretical Study of the Photoisomerization Mechanism of All-Trans-Retinyl Acetate.

The compound 9-cis-retinyl acetate (9-cis-RAc) is a precursor to 9-cis-retinal, which has potential application in the treatment of some hereditary diseases of the retina. An attractive synthetic route to 9-cis-RAc is based on the photoisomerization reaction of the readily available all-trans-RAc. In the present study, we examine the mechanism of the photoisomerization reaction with the use of state-of-the-art electronic structure calculations for two polyenic model compounds: tEtEt-octatetraene and tEtEtEc-2,6-dimethyl-1,3,5,7,9-decapentaene. The occurrence of photoisomerization is attributed to a chain-kinking mechanism, whereby a series of S1/S0 conical intersections associated with kinking deformations at different positions along the polyenic chain mediate internal conversion to the S0 state, and subsequent isomerization around one of the double bonds. Two other possible photoisomerization mechanisms are taken into account, but they are rejected as incompatible with simulation results and/or the available spectroscopic data.

Photoinduced Double Proton Transfer in the Glyoxal-Methanol Complex Revisited: The Role of the Excited States.

Under irradiation in the visible range, the glyoxal-methanol complex in a cryogenic argon matrix undergoes a double proton transfer (DPT) reaction through which the glyoxal molecule isomerizes into hydroxyketene. In this work, we employ electronic structure simulations in order to shed more light on the underlying mechanism. Rewardingly, we find that the lowest singlet excited state (S1) of the complex acts as a gateway to two previously unknown isomerization pathways, of which one takes place entirely in the singlet manifold and the other also involves the lowest triplet state (T1). Both of these pathways are fully compatible with the available experimental data, implying that either or both are operative under experimental conditions. In either pathway, the methanol molecule acts as a proton shuttle between the proton-donating and proton-accepting sites of glyoxal, resulting in a dramatic lowering of the potential energy barrier to isomerization with respect to the case of isolated glyoxal. The occurrence of DPT in the singlet manifold is demonstrated directly with the use of nonadiabatic molecular dynamics simulations at the spin-flip time-dependent density functional theory level.

Simulating the Nonadiabatic Relaxation Dynamics of 4-(N,N-Dimethylamino)benzonitrile (DMABN) in Polar Solution.

The compound 4-(N,N-dimethylamino)benzonitrile (DMABN) represents the archetypal system for dual fluorescence, a rare photophysical phenomenon in which a given fluorophore shows two distinct emission bands. Despite extensive studies, the underlying mechanism remains the subject of debate. In the present contribution, we address this issue by simulating the excited-state relaxation process of DMABN as it occurs in polar solution. The potential energy surfaces for the system are constructed with the use of the additive quantum mechanics/molecular mechanics (QM/MM) method, and the coupled dynamics of the electronic wave function and the nuclei is propagated with the semiclassical fewest switches surface hopping method. The DMABN molecule, which comprises the QM subsystem, is treated with the use of the second-order algebraic diagrammatic construction (ADC(2)) method with the imposition of spin-opposite scaling (SOS). It is verified that this level of theory achieves a realistic description of the excited-state potential energy surfaces of DMABN. The simulation results qualitatively reproduce the main features of the experimentally observed fluorescence spectrum, thus allowing the unambiguous assignment of the two fluorescence bands: the normal band is due to the near-planar locally excited (LE) structure of DMABN, while the so-called "anomalous" second band arises from the twisted intramolecular charge transfer (TICT) structure. The transformation of the LE structure into the TICT structure takes place directly via intramolecular rotation, and is not mediated by another excited-state structure. In particular, the oft-discussed rehybridized intramolecular charge transfer (RICT) structure, which is characterized by a bent nitrile group, does not play a role in the relaxation process.

Ultrafast ring-opening and solvent-dependent product relaxation of photochromic spironaphthopyran.

The ultrafast dynamics of unsubstituted spironaphthopyran (SNP) were investigated using femtosecond transient UV and visible absorption spectroscopy in three different solvents and by semi-classical nuclear dynamics simulations. The primary ring-opening of the pyran unit was found to occur in 300 fs yielding a non-planar intermediate in the first singlet excited state (S1). Subsequent planarisation and relaxation to the product ground state proceed through barrier crossing on the S1 potential energy surface (PES) and take place within 1.1 ps after excitation. Simulations show that more than 90% of the trajectories involving C-O bond elongation lead to the planar, open-ring product, while relaxation back to the S0 of the closed-ring form is accompanied by C-N elongation. All ensuing spectral dynamics are ascribed to vibrational relaxation and thermalisation of the product with a time constant of 13 ps. The latter shows dependency on characteristics of the solvent with solvent relaxation kinetics playing a role.

Theoretical Study of Ground- and Excited-State Charge Transfer in Fulvene-Based Donor-Acceptor Systems.

Donor-acceptor systems based on fulvene as the electron-accepting moiety are typified by exotic, strongly polar electronic structures. In this contribution, ab initio calculations have been performed to explore the ground- and excited-state properties of an archetypal compound of this class, which incorporates the exocyclic carbon atom of fulvene into a tetramethylimidazoline-like five-membered ring. In the electronic ground state, the compound under study has a pronounced zwitterionic character and is best described as consisting of a negatively charged cyclopentadienyl ring linked covalently to a positively charged tetramethylimidazolium ring. Both of these rings can be considered as aromatic. The excess negative charge localized on the cyclopentadienyl ring is highly labile in the photochemical sense: the low-lying valence excited states exhibit varying degrees of reverse charge transfer, whereby electron density is transferred from the cyclopentadienyl ring back onto the tetramethylimidazolium ring. The topographies of the excited-state potential energy surfaces favor rapid and efficient internal conversion at an extended, fulvene-like S1/S0 conical intersection seam. As a consequence, the excited-state lifetime of this compound is predicted to be on the order of 100 fs.

Oscillatory Photoelectron Signal of N-Methylmorpholine as a Test Case for the Algebraic-Diagrammatic Construction Method of Second Order.

Motivated by recent progress in the application of time-resolved photoelectron spectroscopy (TRPES) to molecular Rydberg states, we report herein a detailed assessment of the performance of the second-order algebraic diagrammatic construction (ADC(2)) method in the simulation of their TRPES spectra. As the test case, we employ the tertiary aliphatic amine N-methylmorpholine (NMM), which is notable for the fact that the signal of its 3s state exhibits long-lived oscillations along the electron binding energy axis. The relaxation process of photoexcited NMM is simulated via the Born-Oppenheimer molecular dynamics method, and the resulting TRPES spectrum is generated on the basis of ionization energies and approximate Dyson orbital norms calculated with the continuum orbital technique. On the whole, the simulated TRPES spectrum achieves satisfactory agreement with experiment, which suggests that the ADC(2) method provides a realistic description of the potential energy surfaces of the relevant excited and ionized states. In particular, the simulations reproduce the fine oscillatory structure of the signal of the 3s state, and provide evidence to the effect that it results from a coherent vibrational wavepacket evolving along the deformation modes of the six-membered ring. However, it is found that ADC(2) underestimates electron binding energies by up to a few tenths of an electronvolt. The case of NMM demonstrates the usefulness of ADC(2) as a tool to aid the interpretation of the TRPES spectra of large organic molecules.

Mechanism Underlying the Nucleobase-Distinguishing Ability of Benzopyridopyrimidine (BPP).

Benzopyridopyrimidine (BPP) is a fluorescent nucleobase analogue capable of forming base pairs with adenine (A) and guanine (G) at different sites. When incorporated into oligodeoxynucleotides, it is capable of differentiating between the two purine nucleobases by virtue of the fact that its fluorescence is largely quenched when it is base-paired to guanine, whereas base-pairing to adenine causes only a slight reduction of the fluorescence quantum yield. In the present article, the photophysics of BPP is investigated through computer simulations. BPP is found to be a good charge acceptor, as demonstrated by its positive and appreciably large electron affinity. The selective quenching process is attributed to charge transfer (CT) from the purine nucleobase, which is predicted to be efficient in the BPP-G base pair, but essentially inoperative in the BPP-A base pair. The CT process owes its high selectivity to a combination of two factors: the ionization potential of guanine is lower than that of adenine, and less obviously, the site occupied by guanine enables a greater stabilization of the CT state through electrostatic interactions than the one occupied by adenine. The case of BPP illustrates that molecular recognition via hydrogen bonding can enhance the selectivity of photoinduced CT processes.

Theoretical Study of the Photophysics of 8-Vinylguanine, an Isomorphic Fluorescent Analogue of Guanine.

Paving the way for the application of the algebraic-diagrammatic construction scheme of second-order (ADC(2)) to systems based on the guanine chromophore, we demonstrate the this excited-state electronic structure method provides a realistic description of the photochemistry of 9H-guanine, in close agreement with the benchmark provided by the CASPT2 method. We then proceed to apply the ADC(2) method to the photochemistry of 8-vinylguanine (8vG), a minimally modified analogue of guanine which, unlike the naturally occurring nucleobase, displays intense fluorescence, indicative of a much longer-lived excited electronic state. The emissive electronic state of 8vG is identified as an ππ*-type intramolecular charge transfer (ICT) state, in which a charge of roughly -0.2 e is transferred from the guanine moiety onto the vinyl substituent. The main radiationless deactivation pathway competing with fluorescence is predicted to involve the molecule leaving the minimum on the ICT ππ* state, and reaching a region of the S1 adiabatic state where it resembles the La ππ* state of unmodified 9H-guanine. The topology of the La ππ* region of the S1 state favors subsequent internal conversion at a crossing seam with the ground electronic state. The sensitivity of this process to environment polarity may explain the experimentally observed fluorescence quenching of 8vG upon incorporation in single- and double-stranded DNA.

Early Events in the Nonadiabatic Relaxation Dynamics of 4-(N,N-Dimethylamino)benzonitrile.

4-(N,N-Dimethylamino)benzonitrile (DMABN) is the archetypal system for dual fluorescence. Several past studies, both experimental and theoretical, have examined the mechanism of its relaxation in the gas phase following photoexcitation to the S2 state, without converging to a single description. In this contribution, we report first-principles simulations of the early events involved in this process performed using the nonadiabatic trajectory surface hopping (TSH) approach in combination with the ADC(2) electronic structure method. ADC(2) is verified to reproduce the ground- and excited-state structures of DMABN in reasonably close agreement with previous theoretical benchmarks. The TSH simulations predict that internal conversion from the S2 state to the S1 takes place as early as 8.5 fs, on average, after the initial photoexcitation, and with no significant torsion of the dimethylamino group relative to the aromatic ring. As evidenced by supporting EOM-CCSD calculations, the population transfer from S2 to S1 can be attributed to the skeletal deformation modes of the aromatic ring and the stretching of the ring-dimethylamino nitrogen bond. The non- or slightly twisted locally excited structure is the predominant product of the internal conversion, and the twisted intramolecular charge transfer structure is formed through equilibration with the locally excited structure with no change of adiabatic state. These findings point toward a new interpretation of data from previous time-resolved experiments.