ABSTRACT
Yttria doped ZrO2 was deposited using an acidic zinc phosphatizing solution and the hydrothermal treatment. The coating was analyzed using a field emission-scanning electron microscope (FE-SEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS). A piston on three balls (ISO 6872) was used for the measurement of biaxial flexural strength. MC3T3-E1 cells attachment was evaluated by SEM, and cell proliferation were assessed using MTS assay™. SEM images confirmed that the zinc phosphate coating layer was successfully prepared and fully covered the surface. The measured adhesive strength of the coating was 79.11 MPa. In vitro cell study indicated that the coated sample had better cell morphology and proliferation. XRD and EDS analysis revealed that the crystalline coating structure indexed as zinc phosphate (hopeite) and the substrate was assigned as zirconia. The flexural strength test showed that the strength of zirconia before and after hydrothermal treatment was not affected.
Subject(s)
Zinc , Zirconium , Materials Testing , Surface Properties , X-Ray DiffractionABSTRACT
Cyclotron resonance (CR) measurements for the Fe-based superconductor KFe(2)As(2) are performed. One signal for CR is observed, and is attributed to the two-dimensional α Fermi surface at the Γ point. We found a large discrepancy in the effective masses of CR [(3.4±0.05)m(e) (m(e) is the free-electron mass)] and de Haas-van Alphen results, a direct evidence of mass enhancement due to electronic correlation. A comparison of the CR and de Haas-van Alphen results shows that both intra- and interband electronic correlations contribute to the mass enhancement in KFe(2)As(2).
