Proteomic Analysis of Subchronic Furan Exposure in the Liver of Male Fischer F344 Rats.

Furan is a volatile compound formed during the thermal processing of foods. Chronic exposure has been shown to cause cholangiocarcinoma and hepatocellular tumors in rodent models. We conducted a 90 day subchronic study in Fisher 344 rats exposed to various doses by gavage to determine the NOAEL. Previous reports have outlined changes in the liver using gross necropsy examination, histopathology, clinical biochemistry, hematology, immunohistochemistry, and toxicogenomics. The data revealed that males were more sensitive than females. The focus of this study was to evaluate the toxicoproteomic changes by 2-dimensional differential in gel electrophoresis followed by mass spectrometry analysis. To compliment previous studies, protein expression changes were evaluated of male animals after 90 days of exposure to doses of 0, 0.03, 0.5, and 8.0 mg/kg bw/d. Significant statistical treatment-related changes compared to the controls identified 45 protein spots containing 38 unique proteins. Proteins identified are implicated in metabolism, redox regulation, protein folding/proteolysis as well as structural and transport proteins. At lower doses, multiple cytoprotective pathways are activated to maintain a homeostasis but ultimately the loss of protein function and impairment of several pathways could lead to adverse health effects at higher doses of furan administration.

Development of a sensitive polyclonal antibody-based competitive indirect ELISA for determination of citrinin in grain-based foods.

A sensitive competitive indirect enzyme-linked immunosorbent assay (ciELISA) was developed for the detection and quantification of citrinin (CIT) in grain-based food samples. The limit of quantification (IC20) of the established method was 0.10 ± 0.02 ng mL-1, with the limit of detection (IC10) being 0.04 ± 0.007 ng mL-1 in wheat and corn flour matrices with a coefficient of variation (CV) less than 20%. The assay was very specific to CIT and showed no cross-reactivity with other mycotoxins (OTA, T-2 toxin, HT-2 toxin, DON, patulin and zearalenone). In spiked wheat and corn flours, the recoveries ranged from 86.6% to 115.6% with CVs of less than 20%. The effectiveness of this method was verified by participating in a proficiency test (PT) from the Food Analysis Performance Assessment Scheme (FAPAS) 17181 corn flour. A successful z-score (-0.6) for this PT sample showed that the present method is comparable to the instrumental methods used by other laboratories in the PT testing scheme. A small survey of grain-based foods was conducted using this method and CIT was detected in 43% of the samples up to a concentration of 17.7 ng g-1. This method is suitable for sensitive and rapid quantitation of citrinin in wheat and corn matrices.

The Validation of the Wheat Gluten ELISA Kit.

Background: It is important to analyze the presence of wheat/gluten in food to avoid wheat allergy or celiac disease. Objective: The Wheat/Gluten ELISA kit was developed to measure total wheat protein or gluten content in wheat, barley, and rye cereals as raw materials, and processed foods. Validation as to whether this kit is suitable for quantifying total wheat protein/gluten was carried out. Methods: The Wheat/Gluten ELISA kit was designed as a sandwich ELISA based on antigliadin polyclonal antibody. Selectivity, interference study, matrix study including incurred food, robustness, stability, and lot-to-lot consistency studies were conducted for the Wheat/Gluten ELISA kit. Incurred matrix studies were also conducted in an independent laboratory. Results: The analysis of 38 different substances revealed no cross-reactivity above the LOQ except for oats. Recoveries of the spiked samples were mostly in the range of 75-140%, including an independent laboratory result. The LOD of the ELISA was found to be 0.02-0.16 mg/kg. Robustness testing proved that extraction time and incubation time of first reaction and enzyme reaction had no significant influence on quantified value. The stability at 2-8°C was found to exceed 12 months. Good lot-to-lot consistency was observed. Conclusions: The Wheat/Gluten ELISA kit showed good analytical performance in the quantitative analysis of total wheat protein/gluten in the identified food products using the AOAC Performance Tested Method(s)SM program. Highlights: The Wheat/Gluten ELISA kit was validated and showed good analytical performance in the quantitative analysis of total wheat protein/gluten in food.

Development of a polyclonal antibody-based indirect competitive ELISA for determination of sterigmatocystin in wheat and corn flours.

Sterigmatocystin (STC) is a toxic secondary metabolite produced by more than 50 fungal species, including Aspergillus flavus, A. parasiticus, A. nidulans, and A. versicolor. The Joint FAO/WHO Expert Committee on Food Additives concluded that sterigmatocystin is genotoxic and carcinogenic with the critical effect determined to be carcinogenicity. The present study describes a simple method to prepare hapten and immunogens in order to generate polyclonal antibodies against this metabolite. We developed a sensitive and specific polyclonal antibody-based competitive indirect enzyme-linked immunosorbent assay (ciELISA) for monitoring STC in wheat and corn flours without the need for derivatisation of STC or clean-up of samples by immunoaffinity chromatography for quantification. The half inhibitory concentration (IC50) of the established method was 4.52 ± 0.81 ng mL-1, with the limit of detection (IC10) being 0.19 ± 0.04 ng mL-1 in wheat and corn flour matrices with the coefficient of variation of less than 22%.The assay was very specific to STC and showed no cross-reactivity with its analogue structures. The ELISA allowed for up to 5% methanol without significant influence on the IC50 value. Validation of the assay was performed by spiking STC into a blank flour matrix and the recoveries were in the range of 75.3 % to 104.5 % with a coefficient of variation less than 15%. A small retail survey was conducted by purchasing wheat (n = 8) and corn flours (n = 2) from local grocery stores. All of these retail samples were negative for STC using the developed ELISA method and were confirmed by LC-MS/MS. We demonstrated a rapid, simple, and reliable method for screening STC in wheat and corn flours.

In vitro immunomodulation of splenocytes from DO11.10 mice by the food colouring agent amaranth.

The chemical amaranth (AM) is permitted as a colouring agent in a variety of foods. Safety was established based on chronic rodent studies. AM and its metabolite naphthionic acid (NA) can be absorbed through the intestine, exposing circulating immune cells including splenocytes. An AM feeding study in rats demonstrated an increase in blood lymphocytes. Yet, in contrast, AM inhibited the delayed-type hypersensitivity reaction to antigen. DO11.10 mice express a T Cell Receptor specific for ovalbumin323-339 peptide (OVAp) presented by I-Ad MHCII. DO11.10 splenocytes were cultured to evaluate mechanisms by which AM and NA modulate immune cell function in vitro. Exposure to OVAp alone for 72 h induced cell proliferation, and combination with 2 or 20 µg/mL AM increased IFN-γ. Cytotoxicity was evident at higher concentrations of AM (200 and 2000 µg/mL) and NA (2000 µg/mL) in combination with OVAp, as both cell number and cytokine secretion decreased. At 200 µg/mL AM with OVAp, immunotoxicity gene expression was modified and OVAp-specific KJ1-26+ CD28+ cells became enriched. The equivalent dose of NA did not modify those parameters. Using an antigen-specific model in vitro, lower concentrations of AM potentiated pro-inflammatory cytokine production, and higher concentrations of AM and NA demonstrated cytotoxicity.

A multi-laboratory evaluation of a clinically-validated incurred quality control material for analysis of allergens in food.

A dessert matrix previously used for diagnosis of food allergies was incurred with pasteurised egg white or skimmed milk powder at 3, 6, 15 and 30 mg allergen protein per kg of dessert matrix and evaluated as a quality control material for allergen analysis in a multi-laboratory trial. Analysis was performed by immunoassay using five kits each for egg and milk (based on casein) and six 'other' milk kits (five based on ß-lactoglobulin and one total milk). All kits detected allergen protein at the 3 mg kg(-1) level. Based on ISO criteria only one egg kit accurately determined egg protein at 3 mg kg(-1) (p=0.62) and one milk (casein) kit accurately determined milk at 6 (p=0.54) and 15 mg kg(-1) (p=0.83), against the target value. The milk "other" kits performed least well of all the kits assessed, giving the least precise analyses. The incurred dessert material had the characteristics required for a quality control material for allergen analysis.

Validation procedures for quantitative gluten ELISA methods: AOAC allergen community guidance and best practices.

The food allergen analytical community is endeavoring to create harmonized guidelines for the validation of food allergen ELISA methodologies to help protect food-sensitive individuals and promote consumer confidence. This document provides additional guidance to existing method validation publications for quantitative food allergen ELISA methods. The gluten-specific criterion provided in this document is divided into sections for information required by the method developer about the assay and information for the implementation of the multilaboratory validation study. Many of these recommendations and guidance are built upon the widely accepted Codex Alimentarius definitions and recommendations for gluten-free foods. The information in this document can be used as the basis of a harmonized validation protocol for any ELISA method for gluten, whether proprietary or nonproprietary, that will be submitted to AOAC andlor regulatory authorities or other bodies for status recognition. Future work is planned for the implementation of this guidance document for the validation of gluten methods and the creation of gluten reference materials.

N-demethylation of cyamemazine via non-classical Polonovski reaction and its conjugation to bovine serum albumin.

A modified Polonovski reaction has been employed to obtain the N-demethylated metabolite of the neuroleptic drug cyamemazine. The synthesis involves N-oxide formation, isolation of the corresponding N-oxide, and a FeSO(4)·7H(2)O mediated Polonovski reaction to afford the desired monodesmethyl cyamemazine. In a subsequent step the hapten N-demethylcyamemazine-hemiglutarate was synthesized and its conjugated to bovine serum albumin (BSA).

Challenges and trends in the determination of selected chemical contaminants and allergens in food.

This article covers challenges and trends in the determination of some major food chemical contaminants and allergens, which-among others-are being monitored by Health Canada's Food Directorate and for which background levels in food and human exposure are being analyzed and calculated. Eleven different contaminants/contaminant groups and allergens have been selected for detailed discussion in this paper. They occur in foods as a result of: use as a food additive or ingredient; processing-induced reactions; food packaging migration; deliberate adulteration; and/or presence as a chemical contaminant or natural toxin in the environment. Examples include acrylamide as a food-processing-induced contaminant, bisphenol A as a food packaging-derived chemical, melamine and related compounds as food adulterants and persistent organic pollutants, and perchlorate as an environmental contaminant. Ochratoxin A, fumonisins, and paralytic shellfish poisoning toxins are examples of naturally occurring toxins whereas sulfites, peanuts, and milk exemplify common allergenic food additives/ingredients. To deal with the increasing number of sample matrices and analytes of interest, two analytical approaches have become increasingly prevalent. The first has been the development of rapid screening methods for a variety of analytes based on immunochemical techniques, utilizing ELISA or surface plasmon resonance technology. The second is the development of highly sophisticated multi-analyte methods based on liquid chromatography coupled with multiple-stage mass spectrometry for identification and simultaneous quantification of a wide range of contaminants, often with much less requirement for tedious cleanup procedures. Whereas rapid screening methods enable testing of large numbers of samples, the multi analyte mass spectrometric methods enable full quantification with confirmation of the analytes of interest. Both approaches are useful when gathering surveillance data to determine occurrence and background levels of both recognized and newly identified contaminants in foods in order to estimate human daily intake for health risk assessment.

Entrapment of functionalized silica microspheres with photo-initiated acrylate-based polymers.

The entrapment of silica-based microspheres, commonly used as stationary phases in chromatography, with an organic porous polymer based on poly(butyl acrylate-co-1,3-butanediol diacrylate) was explored. The spheres were immobilized by photopolymerization leading to entrapped beds within 75 microm i.d. fused silica capillaries, and were mechanically stable, resisting pressure drops of over 5600 psi (38.6 MPa) for only 1 cm of material. The morphology of the polymer formation around the spheres was investigated by SEM and corroborated with back pressure measurements, which indicated that the spheres were held together by encapsulating polymer. The entrapped material was extruded from the capillary in some cases to facilitate imaging. The entrapment conditions were explored, varying the polarity of the sphere surface, the solvent, and the monomers, revealing that polymer formation is based on partitioning of the monomers between the surface and solvent. The resulting polymer morphology is discussed with respect to the effects of confinement, supported by experiments with varying microsphere diameters. The columns described here have favourable properties for use in capillary chromatography and supported catalysis among other applications, and is suitable for lab-on-a-chip devices.

Microsphere entrapped emitters for sample preconcentration and electrospray ionization mass spectrometry.

In this study a nano-electrospray emitter is constructed by precisely positioning entrapped octadecylsilane (ODS) particles within a photoinitiated polymer at the exit aperture of a capillary. Following poly-merization, the microsphere/polymer hybrid material is able to withstand pressures greater than 4000 psi for 1 cm length of material. Smaller microspheres (3 microm) patterned at the exit aperture of a capillary generated the most sensitive/stable electrospray from 100 to 1000 nL/min and moderately stable signal under 100 nL/min. Constant infusion of a standard PPG solution from a batch of eleven emitters resulted in a relatively small variance in total ion current (TIC) counts (8%). The entrapped microsphere emitter design yields an emitter that minimizes clogging and eliminates dead volume between the chromatographic bed and the electrospray emitter. The entrapped ODS microspheres can also be used for sample preparation prior to mass spectrometry (MS) analysis. We show the solid-phase extraction and preconcentration of 20-700 fmol of a peptide (leucine enkephalin) prior to MS analysis on an emitter with 1 cm of entrapped microspheres.

Fabrication and characterization of poly(methylmethacrylate) microfluidic devices bonded using surface modifications and solvents.

The fabrication of polymer microchips allows inexpensive, durable, high-throughput and disposable devices to be made. Poly(methylmethacrylate) (PMMA) microchips have been fabricated by hot embossing microstructures into the substrate followed by bonding a cover plate. Different surface modifications have been examined to enhance substrate and cover plate adhesion, including: air plasma treatment, and both acid catalyzed hydrolysis and aminolysis of the acrylate to yield carboxyl and amine-terminated PMMA surfaces. Unmodified PMMA surfaces were also studied. The substrate and cover plate adhesion strengths were found to increase with the hydrophilicity of the PMMA surface and reached a peak at 600 kN m(-2) for plasma treated PMMA. A solvent assisted system has also been designed to soften less than 50 nm of the surface of PMMA during bonding, while still maintaining microchannel integrity. The extent to which both surface modifications and solvent treatment affected the adhesion of the substrate to the cover plate was examined using nanoindentation methods. The solvent bonding system greatly increased the adhesion strengths for both unmodified and modified PMMA, with a maximum adhesion force of 5500 kN m(-2) achieved for unmodified PMMA substrates. The bond strength decreased with increasing surface hydrophilicity after solvent bonding, a trend that was opposite to what was observed for non-solvent thermal bonding.

Porous polymer monolith assisted electrospray from a glass microdevice.

The coupling of a lab-on-a-chip microfluidic device to a nanoelectrospray ionization mass spectrometer has the potential to automate many routine analytical procedures and produce a powerful analytical tool. However, past coupling strategies have relied on complex manufacturing steps including drilling and etching the device to attach a capillary or building a nanospray emitter directly into the device. This study shows that a nanospray emitter can be easily fabricated using a porous polymer monolith (PPM) at the end of a glass microdevice. These devices are able to obtain a stable electrospray at a variety of flow rates (50-500 nL/min) but optimal results are obtained at lower flow rates (50-100 nL/min) compatible with electroosmotic flow processes. The PPM is photo-patterned so that it can be placed in any position within the channel of the device with no dead volume. The porous character and the hydrophobic nature of the PPM both aid in development of a stable electrospray process. Total ion current traces for the constant infusion of leucine-enkephalin and PPG show relative standard errors as low as 4%, and produce mass spectra with good signal-to-noise (S/N 43) from only 2 fmol of material. In addition, multiple experiments in a given day show good repeatability with variability as low as 13%, and the multiple flow paths inherent in the PPM limit sprayer clogging.

An evaluation of the performance of porous polymer monolith assisted electrospray.

A novel electrospray interface, which has distinct advantages over conventional pulled silica emitters, has been developed. This novel interface can be easily fabricated by forming a porous polymer monolith (PPM) at the end of a fused-silica capillary that facilitates a stable electrospray over a wide range of flow rates with only a modest increase in back-pressure. A comparison was made between the PPM-assisted electrospray and a commercial nanosprayer in terms of sensitivity, stability and robustness. A PPM-filled electrospray tip produced a day-to-day signal variation of 23% relative standard deviation (RSD) over a 3-day period when spraying a 1.0 microM test peptide solution. Furthermore, three different capillaries fabricated by the same process produced a signal variation of 17% RSD, indicating that the fabrication process shows good reproducibility. The multiple flow paths of the PPM function to split the flow and reduce clogging. Even following the accumulation of debris after prolonged use, a stable spray could still be generated with the PPM-filled capillary while the commercial nanosprayer ceased to function properly. In terms of sensitivity, PPM-assisted electrospray showed an enhancement in sensitivity at infusion flow rates between 100 to 1000 nL/min while commercial nanosprayers performed slightly better at flow rates below 100 nL/min. A sample purification step can be combined with the PPM-assisted sprayer, using the PPM as a stationary phase to desalt and preconcentrate samples prior to mass spectrometric detection.

Porous polymer monolith assisted electrospray.

Coupling low-flow analytical separation instrumentation such as capillary electrophoresis, capillary electrochromatography, nano-HPLC, and microfluidic-based devices with electrospray ionization mass spectrometry has yielded powerful analytical tools. However, conventional coupling methodologies such as nanospray suffer from limitations including poor conductive coating robustness, constant clogging, complicated fabrication processes, and incompatibility with large flow rate regimes. This study demonstrates that robust nanospray emitters can be fabricated through the formation and utilization of a porous polymer monolith (PPM) at the end of a fused-silica capillary. Stable electrosprays can be produced from capillaries (75-100-microm i.d.) at a variety of flow rates (50-1000 nL/min) without the need to taper the capillaries by etching or pulling. The PPM is photopatterned to be present only near the capillary exit aperture using conditions that generate pore sizes similar to those seen with nanospray tips. The porous nature of the PPM aids in developing a stable electrospray generating a single clearly visible Taylor cone at relatively high flow rates while at low flow rates (<100 nL/min) a mist, presumably from multiple small Taylor cones, develops. The hydrophobic nature of the PPM should limit problems with band broadening associated with droplet spreading at the capillary exit, while the multiple flow paths inherent in the PPM minimize clogging problems associated with conventional nanospray emitters. Total ion current traces for a constant infusion of standard PPG and cytochrome c solutions are very stable with deviations ranging from only 3 to 8%. The PPM-assisted electrospray produces mass spectra with excellent signal-to-noise ratios from only a few femtomoles of material.

Experimental Investigation of the Primary and Secondary Deuterium Kinetic Isotope Effects for Epoxidation of Alkenes and Ethylene with m-Chloroperoxybenzoic Acid.

The secondary deuterium kinetic isotope effect (DKIE) for the epoxidation of ethylene and d(4)-ethylene by m-chloroperoxybenzoic acid (MCPBA) is determined to be 0.83, or 0.95/alpha-H. The second-order rate constants for MCPBA and MCPBA-O-D epoxidation of a variety of alkenes that differ in the steric access to the double bond (anti-sesquinorbornene (2), tetramethylethylene (3), adamantylideneadamantane (4), 7-norbornylidene-7'-norbornane (5), bis(bicyclo[3.3.1.]non-9-ylidene) (6), bis(homoadamantane) (7), cyclohexene (8), 1-octene (9), trans-5-decene (10) and 2-methyl-1-pentene (11)) have been determined in dichloroethane at 25 degrees C using UV kinetics, and the primary DKIE, k(OH)/k(OD), is 1.05 +/- 0.05 in all cases. By comparison of the rates of epoxidation of sterically encumbered alkenes, it is suggested that the spiro epoxidation transition state is favored over a planar one. The products of the epoxidation of anti-sesquinorbornene are determined to be the epoxide and a cis-hydroxy ester, the latter most probably being formed by acid-catalyzed ring opening of the epoxide by in situ-produced m-chlorobenzoic acid produced in situ to form a beta-hydroxy carbocation and carboxylate ion pair that collapses to product.