Not so biodegradable: Polylactic acid and cellulose/plastic blend textiles lack fast biodegradation in marine waters.

The resistance of plastic textiles to environmental degradation is of major concern as large portions of these materials reach the ocean. There, they persist for undefined amounts of time, possibly causing harm and toxicity to marine ecosystems. As a solution to this problem, many compostable and so-called biodegradable materials have been developed. However, to undergo rapid biodegradation, most compostable plastics require specific conditions that are achieved only in industrial settings. Thus, industrially compostable plastics might persist as pollutants under natural conditions. In this work, we tested the biodegradability in marine waters of textiles made of polylactic acid, a diffused industrially compostable plastic. The test was extended also to cellulose-based and conventional non-biodegradable oil-based plastic textiles. The analyses were complemented by bio-reactor tests for an innovative combined approach. Results show that polylactic acid, a so-called biodegradable plastic, does not degrade in the marine environment for over 428 days. This was also observed for the oil-based polypropylene and polyethylene terephthalate, including their portions in cellulose/oil-based plastic blend textiles. In contrast, natural and regenerated cellulose fibers undergo complete biodegradation within approximately 35 days. Our results indicate that polylactic acid resists marine degradation for at least a year, and suggest that oil-based plastic/cellulose blends are a poor solution to mitigate plastic pollution. The results on polylactic acid further stress that compostability does not imply environmental degradation and that appropriate disposal management is crucial also for compostable plastics. Referring to compostable plastics as biodegradable plastics is misleading as it may convey the perception of a material that degrades in the environment. Conclusively, advances in disposable textiles should consider the environmental impact during their full life cycle, and the existence of environmentally degradable disposal should not represent an alibi for perpetuating destructive throw-away behaviors.

Degradation of synthetic and wood-based cellulose fabrics in the marine environment: Comparative assessment of field, aquarium, and bioreactor experiments.

As global production of textiles rapidly grows, there is urgency to understand the persistence of fabrics in the marine environment, particularly from the microfibers they shed during wearing and washing. Here, we show that fabrics containing polyester (one of the most common plastics) remained relatively intact (viz., with a limited biofilm) after >200 days in seawater off the Scripps Oceanography pier (La Jolla, CA), in contrast to wood-based cellulose fabrics that fell apart within 30 days. We also show similar results under experimental aquaria (in open circuit with the pier waters) as well as bioreactor settings (in close circuit, using microbial inoculum from the North Sea, off Belgium), using nonwoven fabrics and individual fibers, respectively. The fact that fibers released from synthetic textiles remain persistent and non-biodegradable despite their small (invisible) size, highlights concern for the growing industry that uses polyester from recycled plastics to make clothing.

Li3Co1.06(1)TeO6: synthesis, single-crystal structure and physical properties of a new tellurate compound with CoII/CoIII mixed valence and orthogonally oriented Li-ion channels.

A tellurate compound with CoII/CoIII mixed valence states and lithium ions within orthogonally oriented channels was realized in Li3Co1.06(1)TeO6. The single-crystal structure determination revealed two independent and interpenetrating Li/O and (Co,Te)/O substructures with octahedral oxygen coordination of the metal atoms. In contrast to other mixed oxides, a honeycomb-like ordering of CoO6 and TeO6 octahedra was not observed. Li3Co1.06(1)TeO6 crystallizes orthorhombically with the following unit cell parameters and refinement results: Fddd, a = 588.6(2), b = 856.7(2), c = 1781.5(4) pm, R1 = 0.0174, wR2 = 0.0462, 608 F2 values, and 33 variables. Additional electron density in tetrahedral voids in combination with neighboring face-linked and under-occupied octahedral lithium sites offers an excellent possible diffusion pathway for lithium ions. According to the symmetry of the crystal structure the diffusion pathways in Li3Co1.06(1)TeO6 were found in two orthogonal orientations. The CoII/CoIII mixed valence was investigated via X-ray photoelectron spectroscopy (XPS), revealing a composition comparable to that derived from single-crystal X-ray diffractometry. Magnetic susceptibility measurements underlined the coexistence of CoII and CoIII, the title compound, however, showed no magnetic ordering down to low temperatures. The ionic conductivity of Li3Co1.06(1)TeO6 was determined via alternating current (AC) electrochemical impedance spectroscopy and was found to be in the range of 1.6 × 10-6 S cm-1 at 573 K.

Surface chemistry and stability of metastable corundum-type In2O3.

To account for the explanation of an eventual sensing and catalytic behavior of rhombohedral In2O3 (rh-In2O3) and the dependence of the metastability of the latter on gas atmospheres, in situ electrochemical impedance spectroscopic (EIS), Fourier-transform infrared spectroscopic (FT-IR), in situ X-ray diffraction and in situ thermogravimetric analyses in inert (helium) and reactive gases (hydrogen, carbon monoxide and carbon dioxide) have been conducted to link the gas-dependent electrical conductivity features and the surface chemical properties to its metastability towards cubic In2O3. In particular, for highly reducible oxides such as In2O3, for which not only the formation of oxygen vacancies, but deep reduction to the metallic state (i.e. metallic indium) also has to be taken into account, this approach is imperative. Temperature-dependent impedance features are strongly dependent on the respective gas composition and are assigned to distinct changes in either surface adsorbates or free charge carrier absorbance, allowing for differentiating and distinguishing between bulk reduction-related features from those directly arising from surface chemical alterations. For the measurements in an inert gas atmosphere, this analysis specifically also included monitoring the fate of differently bonded, and hence, differently reactive, hydroxyl groups. Reduction of rh-In2O3 proceeds to a large extent indirectly via rh-In2O3 → c-In2O3 → In metal. As deduced from the CO and CO2 adsorption experiments, rhombohedral In2O3 exhibits predominantly Lewis acidic surface sites. The basic character is less pronounced, directly explaining the previously observed high (inverse) water-gas shift activity and the low CO2 selectivity in methanol steam reforming.

Surface chemistry of pure tetragonal ZrO2 and gas-phase dependence of the tetragonal-to-monoclinic ZrO2 transformation.

The surface chemical properties of undoped tetragonal ZrO2 and the gas-phase dependence of the tetragonal-to-monoclinic transformation are studied using a tetragonal ZrO2 polymorph synthesized via a sol-gel method from an alkoxide precursor. The obtained phase-pure tetragonal ZrO2 is defective and strongly hydroxylated with pronounced Lewis acidic and Brønsted basic surface sites. Combined in situ FT-infrared and electrochemical impedance measurements reveal effective blocking of coordinatively unsaturated sites by both CO and CO2, as well as low conductivity. The transformation into monoclinic ZrO2 is suppressed up to temperatures of ∼723 K independent of the gas phase composition, in contrast to at higher temperatures. In inert atmospheres, the persisting structural defectivity leads to a high stability of tetragonal ZrO2, even after a heating-cooling cycle up to 1273 K. Treatments in CO2 and H2 increase the amount of monoclinic ZrO2 upon cooling (>85 wt%) and the associated formation of either Zr-surface-(oxy-)carbide or dissolved hydrogen. The transformation is strongly affected by the sintering/pressing history of the sample, due to significant agglomeration of small crystals on the surface of sintered pellets. Two factors dominate the properties of tetragonal ZrO2: defect chemistry and hydroxylation degree. In particular, moist conditions promote the phase transformation, although at significantly higher temperatures as previously reported for doped tetragonal ZrO2.

Evidence for dissolved hydrogen in the mixed ionic-electronic conducting perovskites La0.6Sr0.4FeO3-δ and SrTi0.7Fe0.3O3-δ.

Two mixed ionic-electronic conducting, Fe-containing perovskites were investigated regarding their reducibility in dry H2, namely lanthanum strontium ferrite (LSF4, La0.6Sr0.4FeO3-δ) and strontium titanium ferrite (STF3, SrTi0.7Fe0.3O3-δ). Upon treatment under comparable reduction conditions, LSF4 is by far more affected by reduction and is reduced more deeply than STF3. Thermal treatments of fully oxidized or slightly reduced LSF4/STF3 at decreased O2 partial pressure lead to spontaneous desorption of O2. Temperature-programmed desorption (TPD) spectra of H2 reveal distinct differences in H2 and H2O desorption. A simple mass balance of H2 reveals that oxygen vacancies formed on STF3 are more resilient towards O2 re-oxidation compared to those on LSF4. The results also imply that substantial amounts of hydrogen are dissolved in the bulk of LSF4 or STF3. 4.9 × 10-2 mol H2 per mol LSF4 and 1.6 × 10-2 mol H2 per mol STF3 are incorporated if the specimens are heated in flowing/dry H2 up to 550 °C and 612 °C, respectively. For LSF4 this equals about 13 hypothetical ML of H2 and for STF3 about 20 hypothetical ML of H2. This conclusion is also supported by Fourier-transform infrared spectroscopy (FT-IR). FT-IR reveals water formation during static H2 treatment of LSF4/STF3, which indicates perovskite reduction. Furthermore, both samples behave extraordinarily hydrophobic and no chemistry involving surface hydroxy groups was observed.

Structural and Electrochemical Properties of Physisorbed and Chemisorbed Water Layers on the Ceramic Oxides Y2O3, YSZ, and ZrO2.

A combination of operando Fourier transform infrared spectroscopy, operando electrochemical-impedance spectroscopy, and moisture-sorption measurements has been exploited to study the adsorption and conduction behavior of H2O and D2O on the technologically important ceramic oxides YSZ (8 mol % Y2O3), ZrO2, and Y2O3. Because the characterization of the chemisorbed and physisorbed water layers is imperative to a full understanding of (electro-)catalytically active doped oxide surfaces and their application in technology, the presented data provide the specific reactivity of these oxides toward water over a pressure-and-temperature parameter range extending up to, e.g., solid-oxide fuel cell (SOFC)-relevant conditions. The characteristic changes of the related infrared bands could directly be linked to the associated conductivity and moisture-sorption data. For YSZ, a sequential dissociative water ("ice-like" layer) and polymeric chained water ("liquid-like") water-adsorption model for isothermal and isobaric conditions over a pressure range of 10(-5) to 24 mbar and a temperature range from room temperature up to 1173 K could be experimentally verified. On pure monoclinic ZrO2, in contrast to highly hydroxylated YSZ and Y2O3, a high surface concentration of OH groups from water chemisorption is absent at any temperature and pressure. Thus, the ice-like and following molecular water layers exhibit no measurable protonic conduction. We show that the water layers, even under these rather extreme experimental conditions, play a key role in understanding the function of these materials. Furthermore, the reported data are supposed to provide an extended basis for the further investigation of close-to-real gas adsorption or catalyzed heterogeneous reactions.

Structural and chemical degradation mechanisms of pure YSZ and its components ZrO2 and Y2O3 in carbon-rich fuel gases.

Structural and chemical degradation mechanisms of metal-free yttria stabilized zirconia (YSZ-8, 8 mol% Y2O3 in ZrO2) in comparison to its pure oxidic components ZrO2 and Y2O3 have been studied in carbon-rich fuel gases with respect to coking/graphitization and (oxy)carbide formation. By combining operando electrochemical impedance spectroscopy (EIS), operando Fourier-transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS), the removal and suppression of CH4- and CO-induced carbon deposits and of those generated in more realistic fuel gas mixtures (syngas, mixtures of CH4 or CO with CO2 and H2O) was examined under SOFC-relevant conditions up to 1273 K and ambient pressures. Surface-near carbidization is a major problem already on the "isolated" (i.e. Nickel-free) cermet components, leading to irreversible changes of the conduction properties. Graphitic carbon deposition takes place already on the "isolated" oxides under sufficiently fuel-rich conditions, most pronounced in the pure gases CH4 and CO, but also significantly in fuel gas mixtures containing H2O and CO2. For YSZ, a comparative quantification of the total amount of deposited carbon in all gases and mixtures is provided and thus yields favorable and detrimental experimental approaches to suppress the carbon formation. In addition, the effectivity and reversibility of removal of the coke/graphite layers was comparably studied in the pure oxidants O2, CO2 and H2O and their effective contribution upon addition to the pure fuel gases CO and CH4 verified.

High-Temperature Carbon Deposition on Oxide Surfaces by CO Disproportionation.

Carbon deposition due to the inverse Boudouard reaction (2CO → CO2 + C) has been studied on yttria-stabilized zirconia (YSZ), Y2O3, and ZrO2 in comparison to CH4 by a variety of different chemical, structural, and spectroscopic characterization techniques, including electrochemical impedance spectroscopy (EIS), Fourier-transform infrared (FT-IR) spectroscopy and imaging, Raman spectroscopy, and electron microscopy. Consentaneously, all experimental methods prove the formation of a more or less conducting carbon layer (depending on the used oxide) of disordered nanocrystalline graphite covering the individual grains of the respective pure oxides after treatment in flowing CO at temperatures above ∼1023 K. All measurements show that during carbon deposition, a more or less substantial surface reduction of the oxides takes place. These results, therefore, reveal that the studied pure oxides can act as efficient nonmetallic substrates for CO-induced growth of highly distorted graphitic carbon with possible important technological implications especially with respect to treatment in pure CO or CO-rich syngas mixtures. Compared to CH4, more carbon is generally deposited in CO under otherwise similar experimental conditions. Although Raman and electron microscopy measurements do not show substantial differences in the structure of the deposited carbon layers, in particular, electrochemical impedance measurements reveal major differences in the dynamic growth process of the carbon layer, eventually leading to less percolated islands and suppressed metallic conductivity in comparison to CH4-induced graphite.

Enhanced kinetic stability of pure and Y-doped tetragonal ZrO2.

The kinetic stability of pure and yttrium-doped tetragonal zirconia (ZrO2) polymorphs prepared via a pathway involving decomposition of pure zirconium and zirconium + yttrium isopropoxide is reported. Following this preparation routine, high surface area, pure, and structurally stable polymorphic modifications of pure and Y-doped tetragonal zirconia are obtained in a fast and reproducible way. Combined analytical high-resolution in situ transmission electron microscopy, high-temperature X-ray diffraction, and chemical and thermogravimetric analyses reveals that the thermal stability of the pure tetragonal ZrO2 structure is very much dominated by kinetic effects. Tetragonal ZrO2 crystallizes at 400 °C from an amorphous ZrO2 precursor state and persists in the further substantial transformation into the thermodynamically more stable monoclinic modification at higher temperatures at fast heating rates. Lower heating rates favor the formation of an increasing amount of monoclinic phase in the product mixture, especially in the temperature region near 600 °C and during/after recooling. If the heat treatment is restricted to 400 °C even under moist conditions, the tetragonal phase is permanently stable, regardless of the heating or cooling rate and, as such, can be used as pure catalyst support. In contrast, the corresponding Y-doped tetragonal ZrO2 phase retains its structure independent of the heating or cooling rate or reaction environment. Pure tetragonal ZrO2 can now be obtained in a structurally stable form, allowing its structural, chemical, or catalytic characterization without in-parallel triggering of unwanted phase transformations, at least if the annealing or reaction temperature is restricted to T ≤ 400 °C.

A high-temperature, ambient-pressure ultra-dry operando reactor cell for Fourier-transform infrared spectroscopy.

The construction of a newly designed high-temperature, high-pressure FT-IR reaction cell for ultra-dry in situ and operando operation is reported. The reaction cell itself as well as the sample holder is fully made of quartz glass, with no hot metal or ceramic parts in the vicinity of the high-temperature zone. Special emphasis was put on chemically absolute water-free and inert experimental conditions, which includes reaction cell and gas-feeding lines. Operation and spectroscopy up to 1273 K is possible, as well as pressures up to ambient conditions. The reaction cell exhibits a very easy and variable construction and can be adjusted to any available FT-IR spectrometer. Its particular strength lies in its possibility to access and study samples under very demanding experimental conditions. This includes studies at very high temperatures, e.g., for solid-oxide fuel cell research or studies where the water content of the reaction mixtures must be exactly adjusted. The latter includes all adsorption studies on oxide surfaces, where the hydroxylation degree is of paramount importance. The capability of the reaction cell will be demonstrated for two selected examples where information and in due course a correlation to other methods can only be achieved using the presented setup.

Hydrogen Surface Reactions and Adsorption Studied on Y2O3, YSZ, and ZrO2.

The surface reactivity of Y2O3, YSZ, and ZrO2 polycrystalline powder samples toward H2 has been comparatively studied by a pool of complementary experimental techniques, comprising volumetric methods (temperature-programmed volumetric adsorption/oxidation and thermal desorption spectrometry), spectroscopic techniques (in situ electric impedance and in situ Fourier-transform infrared spectroscopy), and eventually structural characterization methods (X-ray diffraction and scanning electron microscopy). Reduction has been observed on all three oxides to most likely follow a surface or near-surface-limited mechanism involving removal of surface OH-groups and associated formation of water without formation of a significant number of anionic oxygen vacancies. Partly reversible adsorption of H2 was proven on the basis of molecular H2 desorption. Dictated by the specific hydrophilicity of the oxide, readsorption of water eventually takes place. The inference of this surface-restricted mechanism is further corroborated by the fact that no bulk structural and/or morphological changes were observed upon reduction even at the highest reduction temperatures (1173 K). We anticipate relevant implications for the use of especially YSZ in fuel cell research, since in particular the chemical state and structure of the surface under typical reducing high-temperature conditions affects the operation of the entire cell.

Methane Decomposition and Carbon Growth on Y2O3, Yttria-Stabilized Zirconia, and ZrO2.

Carbon deposition following thermal methane decomposition under dry and steam reforming conditions has been studied on yttria-stabilized zirconia (YSZ), Y2O3, and ZrO2 by a range of different chemical, structural, and spectroscopic characterization techniques, including aberration-corrected electron microscopy, Raman spectroscopy, electric impedance spectroscopy, and volumetric adsorption techniques. Concordantly, all experimental techniques reveal the formation of a conducting layer of disordered nanocrystalline graphite covering the individual grains of the respective pure oxides after treatment in dry methane at temperatures T ≥ 1000 K. In addition, treatment under moist methane conditions causes additional formation of carbon-nanotube-like architectures by partial detachment of the graphite layers. All experiments show that during carbon growth, no substantial reduction of any of the oxides takes place. Our results, therefore, indicate that these pure oxides can act as efficient nonmetallic substrates for methane-induced growth of different carbon species with potentially important implications regarding their use in solid oxide fuel cells. Moreover, by comparing the three oxides, we could elucidate differences in the methane reactivities of the respective SOFC-relevant purely oxidic surfaces under typical SOFC operation conditions without the presence of metallic constituents.

In Situ FT-IR Spectroscopic Study of CO2 and CO Adsorption on Y2O3, ZrO2, and Yttria-Stabilized ZrO2.

In situ FT-IR spectroscopy was exploited to study the adsorption of CO2 and CO on commercially available yttria-stabilized ZrO2 (8 mol % Y, YSZ-8), Y2O3, and ZrO2. All three oxides were pretreated at high temperatures (1173 K) in air, which leads to effective dehydroxylation of pure ZrO2. Both Y2O3 and YSZ-8 show a much higher reactivity toward CO and CO2 adsorption than ZrO2 because of more facile rehydroxylation of Y-containing phases. Several different carbonate species have been observed following CO2 adsorption on Y2O3 and YSZ-8, which are much more strongly bound on the former, due to formation of higher-coordinated polydentate carbonate species upon annealing. As the crucial factor governing the formation of carbonates, the presence of reactive (basic) surface hydroxyl groups on Y-centers was identified. Therefore, chemisorption of CO2 most likely includes insertion of the CO2 molecule into a reactive surface hydroxyl group and the subsequent formation of a bicarbonate species. Formate formation following CO adsorption has been observed on all three oxides but is less pronounced on ZrO2 due to effective dehydroxylation of the surface during high-temperature treatment. The latter generally causes suppression of the surface reactivity of ZrO2 samples regarding reactions involving CO or CO2 as reaction intermediates.

Immunolocalization of BK channels in hippocampal pyramidal neurons.

Neurons are highly specialized cells in which the integration and processing of electrical signals critically depends on the precise localization of ion channels. For large-conductance Ca(2+)- activated K(+) (BK) channels, targeting to presynaptic membranes in hippocampal pyramidal cells was reported; however, functional evidence also suggests a somatodendritic localization. Therefore we re-examined the subcellular distribution of BK channels in mouse hippocampus using a panel of independent antibodies in a combined approach of conventional immunocytochemistry on cultured neurons, pre- and postembedding electron microscopy and immunoprecipitation. In cultured murine hippocampal neurons, the colocalization of BK channels with both pre- and postsynaptic marker proteins was observed. Electron microscopy confirmed targeting of BK channels to axonal as well as dendritic membranes of glutamatergic synapses in hippocampus. A postsynaptic localization of BK channels was also supported by the finding that the channel coimmunoprecipitated with PSD95, a protein solely expressed in the postsynaptic compartment. These results thus demonstrate that BK channels reside in both post- and presynaptic compartments of hippocampal pyramidal neurons.