Potential biomaterials and experimental animal models for inventing new drug delivery approaches in the neurodegenerative disorder: Multiple sclerosis.

The tight junction of endothelial cells in the central nervous system (CNS) has an ideal characteristic, acting as a biological barrier that can securely regulate the movement of molecules in the brain. Tightly closed astrocyte cell junctions on blood capillaries are the blood-brain barrier (BBB). This biological barrier prohibits the entry of polar drugs, cells, and ions, which protect the brain from harmful toxins. However, delivering any therapeutic agent to the brain in neurodegenerative disorders (i.e., schizophrenia, multiple sclerosis, etc.) is extremely difficult. Active immune responses such as microglia, astrocytes, and lymphocytes cross the BBB and attack the nerve cells, which causes the demyelination of neurons. Therefore, there is a hindrance in transmitting electrical signals properly, resulting in blindness, paralysis, and neuropsychiatric problems. The main objective of this article is to shed light on the performance of biomaterials, which will help researchers to create nanocarriers that can cross the blood-brain barrier and achieve a therapeutic concentration of drugs in the CNS of patients with multiple sclerosis (MS). The present review focuses on the importance of biomaterials with diagnostic and therapeutic efficacy that can help enhance multiple sclerosis therapeutic potential. Currently, the development of MS in animal models is limited by immune responses, which prevent MS induction in healthy animals. Therefore, this article also showcases animal models currently used for treating MS. A future advance in developing a novel effective strategy for treating MS is now a potential area of research.

Fabrication of architectonic nanosponges for intraocular delivery of Brinzolamide: An insight into QbD driven optimization, in vitro characterization, and pharmacodynamics.

The intricate structure of the eye poses difficulties in drug targeting, which can be surmounted with the help of nanoformulation strategies. With this view, brinzolamide nanosponges (BNS) were prepared using the emulsion solvent evaporation technique and optimized via Box-Behnken statistical design. The optimized BNS were further incorporated into a poloxamer 407 in situ gel (BNS-ISG) and evaluated. The optimized BNS showed spherical morphology, entrapment efficiency of 83.12 ± 1.2 % with particle size of 114 ± 2.32 nm and PDI of 0.11 ± 0.01. The optimized BNS-ISG exhibited a pseudoplastic behavior and depicted a gelling temperature and gelation time of 35 ± 0.5 °C and 10 ± 2 s respectively. In-vitro release and ex- vivo permeation studies of BNS-ISG demonstrated a sustained release pattern as compared to Brinzox®. Additionally, the HET-CAM and in vitro cytotoxicity studies (using SIRC cell line) ensured that the formulation was non-irritant and nontoxic for ophthalmic delivery. The in vivo pharmacodynamic study using rabbit model depicted that BNS-ISG treatment significantly lowers the intra ocular pressure for prolonged period of time when compared with Brinzox®. In conclusion, the BNS-ISG is an efficient and scalable drug delivery system with significant potential as the targeted therapy of posterior segment eye diseases.

Antipsychotic Potential and Safety Profile of TPGS-Based Mucoadhesive Aripiprazole Nanoemulsion: Development and Optimization for Nose-To-Brain Delivery.

Delivering therapeutics to the brain using conventional dosage forms is always a challenge, thus the present study was aimed to formulate mucoadhesive nanoemulsion (MNE) of aripiprazole (ARP) for intranasal delivery to transport the drug directly to the brain. Therefore, a TPGS based ARP-MNE was formulated and optimized using the Box-Behnken statistical design. The improved in vitro release profile of the formulation was in agreement to enhanced ex vivo permeation through sheep mucous membranes with a maximum rate of permeation co-efficient (62.87  cm h-1 × 103) and flux (31.43  µg cm-2.h-1). The pharmacokinetic profile following single-dose administration showed the maximum concentration of drug in the brain (Cmax) of 15.19 ± 2.51  µg mL-1 and Tmax of 1 h in animals with ARP-MNE as compared to 10.57 ± 1.88  µg mL-1 and 1 h, and 2.52 ± 0.38  µg mL-1 and 3 h upon intranasal and intravenous administration of ARP-NE, respectively. Further, higher values of % drug targeting efficiency (96.9%) and % drug targeting potential (89.73%) of ARP-MNE through intranasal administration were investigated. The studies in Wistar rats showed no existence of extrapyramidal symptoms through the catalepsy test and forelimb retraction results. No ex vivo ciliotoxicity on nasal mucosa reflects the safety of the components and delivery tool. Further, findings on locomotor activity and hind-limb retraction test in ARP-MNE treated animals established its antipsychotic efficacy. Thus, it can be inferred that the developed ARP-MNE could effectively be explored as brain delivery cargo in the effective treatment of schizophrenia without producing any toxic manifestation.

Preparation, characterization, and optimization of asenapine maleate mucoadhesive nanoemulsion using Box-Behnken design: In vitro and in vivo studies for brain targeting.

The tight junctions between capillary endothelial cells of the blood-brain barrier (BBB) restricts the entry of therapeutics into the brain. Potential of the intranasal delivery tool has been explored in administering the therapeutics directly to the brain, thus bypassing BBB. The objective of this study was to develop and optimize an intranasal mucoadhesive nanoemulsion (MNE) of asenapine maleate (ASP) in order to enhance the nasomucosal adhesion and direct brain targetability for improved efficacy and safety. Box-Behnken statistical design was used to recognize the crucial formulation variables influencing droplet size, size distribution and surface charge of ASP-NE. ASP-MNE was obtained by incorporating GRAS mucoadhesive polymer, Carbopol 971 in the optimized NE. Optimized ASP-MNE displayed spherical morphology with a droplet size of 21.2 ± 0.15 nm and 0.355 polydispersity index. Improved ex-vivo permeation was observed in ASP-NE and ASP-MNE, compared to the ASP-solution. Finally, the optimized formulation was found to be safe in ex-vivo ciliotoxicity study on sheep nasal mucosa. The single-dose pharmacokinetic study in male Wistar rats revealed a significant increase in concentration of ASP in the brain upon intranasal administration of ASP-MNE, with a maximum of 284.33 ± 5.5 ng/mL. The time required to reach maximum brain concentration (1 h) was reduced compared to intravenous administration of ASP-NE (3 h). Furthermore, it has been established during the course of present study, that the brain targeting capability of ASP via intranasal administration had enhanced drug-targeting efficiency and drug-targeting potential. In the animal behavioral studies, no extrapyramidal symptoms were observed after intranasal administration of ASP-MNE, while good locomotor activity and hind-limb retraction test established its antipsychotic activity in treated animals. Thus, it can be concluded that the developed intranasal ASP-MNE could be used as an effective and safe tool for brain targeting of ASP in the treatment of psychotic disorders.

Nanostructured lipid carriers engineered for intranasal delivery of teriflunomide in multiple sclerosis: optimization and in vivo studies.

BACKGROUND: Multiple sclerosis (MS) is one of the most severe autoimmune disorder of the central nervous system (CNS). OBJECTIVE: The present research work was aimed to formulate and investigate teriflunomide (TFM)-loaded intranasal (i.n.) nanostructured lipid carriers (NLC) for the treatment of multiple sclerosis (MS). METHODS: The TFM-loaded NLC (TFM-NLC) nanoparticles were prepared by melt emulsification ultrasonication method using biodegradable and biocompatible polymers. The Box-Behnken statistical design was applied to optimize the formulation. The optimized NLC formulation was subjected to evaluate for particle size, entrapment efficiency (%), in vitro and ex vivo permeation. The safety and efficacy of optimized formulations were demonstrated using pharmacodynamic, subacute toxicity and hepatotoxicity data. RESULTS: Experimental data demonstrated that optimized NLC formulation (F17) showed significant size (99.82 ± 1.36 nm), zeta potential (-22.29 ± 1.8 mV) and % entrapment efficiency (83.39 ± 1.24%). Alternatively, ex vivo permeation of TFM mucoadhesive NLC (TFM-MNLC) and TFM-NLC was observed 830 ± 7.6 and 651 ± 9.8 µg/cm2, respectively. Whereas, TFM-MNLC shows around 2.0-folds more Jss than the TFM-NLC. Finally, TFM-MNLC (i.n.) formulation produced the rapid remyelination in cuprizone-treated animals and decreases the number of entries in open compartment of EPM when compared with negative control and TFM-NLC (oral) animals. Simultaneously, the nanoformulation did not reflect any gross changes in hepatic biomarkers and subacute toxicity when compared with control. CONCLUSIONS: Hence it can be inferred that the nose-to-brain delivery of TFM-MNLC can be considered as effective and safe delivery for brain disorders.

Agranulocytosis-Protective Olanzapine-Loaded Nanostructured Lipid Carriers Engineered for CNS Delivery: Optimization and Hematological Toxicity Studies.

Potential risk of agranulocytosis is one of the drug-induced adverse effects of the second-generation antipsychotic agents. The present investigation aimed to formulate and investigate olanzapine (OLZ)-loaded nanostructured lipid carriers (OLZ-NLCs) via intranasal (i.n.) route. The NLC was prepared by melt emulsification method and optimized by Box-Behnken design. Mucoadhesive NLC was prepared by using 0.4% Carbopol 974P (OLZ-MNLC (C)) and the combination of 17% poloxamer 407 and 0.3% of HPMC K4M (OLZ-MNLC (P+H)). The particle size, zeta potential, and entrapment efficiency were found to be 88.95 nm ± 1.7 nm, - 22.62 mV ± 1.9 mV, and 88.94% ± 3.9%, respectively. Ex vivo permeation of OLZ-NLC, OLZ-MNLC (P+H), and OLZ-MNLC (C) was found to be 545.12 µg/cm2 ± 12.8 µg/cm2, 940.02 µg/cm2 ± 15.5 µg/cm2, and 820.10 µg/cm2 ± 11.3 µg/cm2, respectively, whereas the OLZ-MNLC (P+H) formulation showed rapid drug permeation than the OLZ-NLC and OLZ-MNLC (C) formulations. The OLZ-MNLC (P+H) formulation was shown to have 13.57- and 27.64-fold more Jss than the OLZ-MNLC (C) and OLZ-NLC formulations. The OLZ nanoformulations showed sustained release of up to 8 h. Finally, the brain Cmax of technetium-99m (99mTc)-OLZ-MNLC (i.n.) and 99mTc-OLZ-NLC (i.v.) was found to be 936 ng and 235 ng, respectively, whereas the Cmax of i.n. administration was increased 3.98-fold more than the Cmax of i.v. administration. The in vivo hematological study of OLZ-MNLC (P+H) confirmed that the i.n. formulation did not reflect any variation in leukocyte, RBC and platelet counts. Hence, it can be concluded that the nose-to-brain delivery of OLZ-MNLC (P+H) can be considered as an effective and safe delivery for CNS disorders.

Formulation and ex vivo-in vivo evaluation of pH-triggered brimonidine tartrate in situ gel for the glaucoma treatment using application of 32 factorial design.

CONTEXT: Short residence time, poor bioavailability and poor permeability are the major problems for conventional eye drops treatment. OBJECTIVE: The aim of this article is to develop, optimize and ex vivo-in vivo investigation of brimonidine tartrate in situ gel as compared to marketed eye drops for the treatment of glaucoma. MATERIALS AND METHODS: The effect of independent variables, namely concentrations of polymers, on various dependent variables like viscosity at physiological pH and in vitro drug release were studied by using 32 factorial design. Further the optimized formulation was characterized for ex vivo and in vivo study. RESULTS AND DISCUSSION: Experimental data demonstrated that optimized in situ gel formulation (F8) showed in vitro-ex vivo sustained release profile with polymer composites carbopol 974P and HPMC K4M. After 5 h of ex vivo transcorneal permeation study, the amount recovered from the corneal surface on the donor chamber 12.40% (124 ug) and the amount collected from the receptor chamber 76.8% (760 ug) of the initial dose 1 mg. The total amount recovered from the permeation experiment was 89.2%. Bioadhesive carbopol 974P and viscosity HPMC K4M composites optimized formulation (F 8) produce greater influence on the duration of drug action and improved intraocular pressure reduction activity as compared to marketed eye drop solution in in vivo study. CONCLUSION: The developed in situ gelling system as a promising ophthalmic formulation to prolong the drug lowering effect on the intraocular pressure.

In vitro and in vivo evaluation of colon cancer targeted epichlorohydrin crosslinked Portulaca-alginate beads.

The aim of this study was to formulate a novel dual crosslinked hydrogel bead using Portulaca mucilage for colon-targeted delivery of 5-fluorouracil (5-FU) and evaluate its safety, specificity and efficacy. The ionotropic gelation technique was employed to prepare the hydrogel beads of Portulaca mucilage. For this, the mucilage was initially crosslinked with alginate and calcium ions. Epichlorohydrin was employed as a crosslinker in the second crosslinking step. The formulation was subjected to in vitro and in vivo studies to evaluate morphology, size, cytotoxicity, and organ distribution. Human HT-29 colon cancer cell-line was used for in vitro assays and in vivo studies were performed in Wistar rats to assess the usefulness and effectiveness of the formulation for colon cancer therapy. Microsphere sizes ranged from 930 to 977µm and possessed a high level of drug encapsulation efficiency (ca. 78% w/w). Compared with 5-FU solution (Tmax = 1.2 h, mean resident time: MRT = 3.3h) the dual crosslinked Portulaca microspheres exhibited sustained drug release after oral administration to rats (Tmax = 16h, MRT = 14h). The relative bioavailability of 5-FU solution and the microspheres were 100 and 93.6% respectively. Tissue distribution studies indicated high concentration of 5-FU in colon. In-vitro anticancer assay demonstrated IC50 value of 11.50 µg/ml against HT-29 colon cancer cell line. The epichlorohydrin cross-linked Portulaca microspheres prepared in this study provided sustained release of 5-FU up to 16h in the colonic region and enhanced the antitumor activity of the neoplastic drug. The formulation is hence an ideal carrier system for colon-targeted drug delivery.

Formulation and in vitro evaluation of xanthan gum-based bilayered mucoadhesive buccal patches of zolmitriptan.

A novel bilayered mucoadhesive buccal patch of zolmitriptan was prepared using xanthan gum (XG) as mucoadhesive polymer. Hydroxypropyl methylcellulose E-15 was used as film-former and polyvinyl alcohol (PVA) was incorporated, to increase the tensile strength of the patches. To study the effect of independent variables viz. concentrations of XG and PVA, on various dependent variables like in vitro drug release, ex vivo mucoadhesive strength and swelling index, 3(2) factorial design was employed. In vitro drug release studies of optimized formulation showed initially, rapid drug release; 43.15% within 15 min, followed by sustained release profile over 5h. Incorporation of 4% dimethyl sulfoxide enhanced drug permeability by 3.29 folds, transported 29.10% of drug after 5h and showed no buccal mucosal damage after histopathological studies. In conclusion, XG can be used as a potential drug release modifier and mucoadhesive polymer for successful formulation of zolmitriptan buccal patches.

Optimization for the production of surfactin with a new synergistic antifungal activity.

BACKGROUND: Two of our long term efforts are to discover compounds with synergistic antifungal activity from metabolites of marine derived microbes and to optimize the production of the interesting compounds produced by microorganisms. In this respect, new applications or mechanisms of already known compounds with a high production yield could be continually identified. Surfactin is a well-known lipopeptide biosurfactant with a broad spectrum of antimicrobial and antiviral activity; however, there is less knowledge on surfactin's antifungal activity. In this study, we investigated the synergistic antifungal activity of C(15)-surfactin and the optimization of its production by the response surface method. METHODOLOGY/PRINCIPAL FINDINGS: Using a synergistic antifungal screening model, we found that the combination of C(15)-surfactin and ketoconazole (KTC) showed synergistic antifungal effect on Candida albicans SC5314 when the concentrations of C(15)-surfactin and KTC were 6.25 µg/mL and 0.004 µg/mL, respectively. These concentrations were lower than their own efficient antifungal concentrations, which are >100 µg/mL and 0.016 µg/mL, respectively. The production of C(15)-surfactin from Bacillus amyloliquefaciens was optimized by the response surface methodology in shaker flask cultivation. The Plackett-Burman design found sucrose, ammonium nitrate and NaH(2)PO(4) x 2H(2)O to have significant effects on C(15)-surfactin production. The optimum values of the tested variables were 21.17 g/L sucrose, 2.50 g/L ammonium nitrate and 11.56 g/L NaH(2)PO(4)·2H(2)O. A production of 134.2 mg/L, which were in agreement with the prediction, was observed in a verification experiment. In comparison to the production of original level (88.6 mg/L), a 1.52-fold increase had been obtained. CONCLUSION/SIGNIFICANCE: This work first found that C(15)-surfactin was an efficient synergistic antifungal agent, and demonstrated that response surface methodology was an effective method to improve the production of C(15)-surfactin.

Production and characterization of a group of bioemulsifiers from the marine Bacillus velezensis strain H3.

Marine microbes are a rich source of bioactive compounds, such as drugs, enzymes, and biosurfactants. To explore the bioactive compounds from our marine natural product library, an oil emulsification assay was applied to discover biosurfactants and bioemulsifiers. A spore-forming bacterial strain from sea mud was found to produce bioemulsifiers with good biosurfactant activity and a broad spectrum of antimicrobial properties. It was identified as Bacillus velezensis H3 using genomic and phenotypic data analysis. This strain was able to produce biosurfactants with an optimum emulsification activity at pH 6.0 and 2% NaCl by using starch as the carbon source and ammonium sulfate as the nitrogen source. The emulsification-guided isolation and purification procedure led to the discovery of the biosurfactant components, which were mainly composed of nC(14)-surfactin and anteisoC(15)-surfactin as determined by NMR and MS spectra. These compounds can reduce the surface tension of phosphate-buffered saline (PBS) from 71.8 to 24.8 mN/m. The critical micelle concentrations (CMCs) of C(14)-surfactin and C(15)-surfactin in 0.1 M PBS (pH 8.0) were determined to be 3.06 x 10(-5) and 2.03 x 10(-5) mol/L, respectively. The surface tension values at CMCs for C(14)-surfactin and C(15)-surfactin were 25.7 and 27.0 mM/m, respectively. In addition, the H3 biosurfactant exhibited antimicrobial activities against Staphyloccocus aureus, Mycobacterium, Klebsiella peneumoniae, Pseudomonas aeruginosa, and Candida albicans. Thus B. velezensis H3 is an alternative surfactin producer with potential application as an industrial strain for the lipopeptide production.