Towards All-Non-Vacuum-Processed Photovoltaic Systems: A Water-Based Screen-Printed Cu(In,Ga)Se2 Photoabsorber with a 6.6% Efficiency.

During the last few decades, major advances have been made in photovoltaic systems based on Cu(In,Ga)Se2 chalcopyrite. However, the most efficient photovoltaic cells are processed under high-energy-demanding vacuum conditions. To lower the costs and facilitate high-throughput production, printing/coating processes are proving to be effective solutions. This work combined printing, coating, and chemical bath deposition processes of photoabsorber, buffer, and transparent conductive layers for the development of solution-processed photovoltaic systems. Using a sustainable approach, all inks were formulated using water and ethanol as solvents. Screen printing of the photoabsorber on fluorine-doped tin-oxide-coated glass followed by selenization, chemical bath deposition of the cadmium sulfide buffer, and final sputtering of the intrinsic zinc oxide and aluminum-doped zinc oxide top conductive layers delivered a 6.6% maximum efficiency solar cell, a record for screen-printed Cu(In,Ga)Se2 solar cells. On the other hand, the all-non-vacuum-processed device with spray-coated intrinsic zinc-oxide- and tin-doped indium oxide top conductive layers delivered a 2.2% efficiency. The given approaches represent relevant steps towards the fabrication of sustainable and efficient Cu(In,Ga)Se2 solar cells.

Large-Scale Colloidal Synthesis of Chalcogenides for Thermoelectric Applications.

A simple and effective preparation of solution-processed chalcogenide thermoelectric materials is described. First, PbTe, PbSe, and SnSe were prepared by gram-scale colloidal synthesis relying on the reaction between metal acetates and diphenyl dichalcogenides in hexadecylamine solvent. The resultant phase-pure chalcogenides consist of highly crystalline and defect-free particles with distinct cubic-, tetrapod-, and rod-like morphologies. The powdered PbTe, PbSe, and SnSe products were subjected to densification by spark plasma sintering (SPS), affording dense pellets of the respective chalcogenides. Scanning electron microscopy shows that the SPS-derived pellets exhibit fine nano-/micro-structures dictated by the original morphology of the key constituting particles, while the powder X-ray diffraction and electron microscopy analyses confirm that the SPS-derived pellets are phase-pure materials, preserving the structure of the colloidal synthesis products. The resultant solution-processed PbTe, PbSe, and SnSe exhibit low thermal conductivity, which might be due to the enhanced phonon scattering developed over fine microstructures. For undoped n-type PbTe and p-type SnSe samples, an expected moderate thermoelectric performance is achieved. In contrast, an outstanding figure-of-merit of 0.73 at 673 K was achieved for undoped n-type PbSe outperforming, the majority of the optimized PbSe-based thermoelectric materials. Overall, our findings facilitate the design of efficient solution-processed chalcogenide thermoelectrics.

Photocatalytic solid-phase degradation of polyethylene with fluoride-doped titania under low consumption ultraviolet radiation.

Photodegradation of plastic in solid-phase requires the polymer to be composited with an efficient photocatalyst. We report herein the successful synthesis and characterization of fluoride-doped-TiO2 and its applicability, for the first time, on solid-phase photodegradation of polyethylene films. Nearly half weight loss of polyethylene, containing only 2% of the photocatalyst, is eliminated after three weeks of ultraviolet A radiation using a low consumption light emitting diode lamp, defeating previously reported data. The half-life time of the plastic was around 3 weeks, highlighting the viability of this process for real applications. Results were compared to raw PE and PE composite with well-known TiO2, resulting in, respectively, 0 and 26% of weight loss. The degradation process was monitored by optical microscopy, scanning electron microscopy, X-ray diffraction, thermogravimetric analysis, Fourier transform infrared and X-ray photoelectron spectroscopy, which revealed the formation of plastic cracks, loss of polyethylene crystallinity and thus stability, the oxidation of C-H bonds and the oxidized state of the surface compounds during photodegradation. The obtained results open a path for the future production of cleaner and self-photodegradable plastics, where the photocatalyst would be introduced in all the manufactured plastics, making possible the quicker photodegradation of the plastics that end up on the environment and the plastics reaching wastewater treatment plants.

High Seebeck Coefficient from Screen-Printed Colloidal PbSe Nanocrystals Thin Film.

Thin-film thermoelectrics (TEs) with a thickness of a few microns present an attractive opportunity to power the internet of things (IoT). Here, we propose screen printing as an industry-relevant technology to fabricate TE thin films from colloidal PbSe quantum dots (QDs). Monodisperse 13 nm-sized PbSe QDs with spherical morphology were synthesized through a straightforward heating-up method. The cubic-phase PbSe QDs with homogeneous chemical composition allowed the formulation of a novel ink to fabricate 2 µm-thick thin films through robust screen printing followed by rapid annealing. A maximum Seebeck coefficient of 561 µV K-1 was obtained at 143 °C and the highest electrical conductivity of 123 S m-1 was reached at 197 °C. Power factor calculations resulted in a maximum value of 2.47 × 10-5 W m-1 K-2 at 143 °C. To the best of our knowledge, the observed Seebeck coefficient value is the highest reported for TE thin films fabricated by screen printing. Thus, this study highlights that increased Seebeck coefficients can be obtained by using QD building blocks owing to quantum confinement.

Low Lattice Thermal Conductivity in a Wider Temperature Range for Biphasic-Quaternary (Ti,V)CoSb Half-Heusler Alloys.

Intrinsically high lattice thermal conductivity has remained a major bottleneck for achieving a high thermoelectric figure of merit (zT) in state-of-the-art ternary half-Heusler (HH) alloys. In this work, we report a stable n-type biphasic-quaternary (Ti,V)CoSb HH alloy with a low lattice thermal conductivity κL ≈ 2 W m-1 K-1 within a wide temperature range (300-873 K), which is comparable to the reported nanostructured HH alloys. A solid-state transformation driven by spinodal decomposition upon annealing is observed in Ti0.5V0.5CoSb HH alloy, which remarkably enhances phonon scattering, while electrical properties correlate well with the altering electronic band structure and valence electron count (VEC). A maximum zT ≈ 0.4 (±0.05) at 873 K was attained by substantial lowering of κL and synergistic enhancement of the power factor. We perform first-principles density functional theory calculations to investigate the structure, stability, electronic structure, and transport properties of the synthesized alloy, which rationalize the reduction in the lattice thermal conductivity to the increase in anharmonicity due to the alloying. This study upholds the new possibilities of finding biphasic-quaternary HH compositions with intrinsically reduced κL for prospective thermoelectric applications.

GO-TiO2 as a Highly Performant Photocatalyst Maximized by Proper Parameters Selection.

The synthesis and characterization of novel graphene oxide coupled to TiO2 (GO-TiO2) was carried out in order to better understand the performance of this photocatalyst, when compared to well-known TiO2 (P25) from Degussa. Thus, its physical-chemical characterization (FTIR, XRD, N2 isotherms and electrochemical measurements) describes high porosity, suitable charge and high electron mobility, which enhance pollutant degradation. In addition, the importance of the reactor set up was highlighted, testing the effect of both the irradiated area and distance between lamp and bulb solution. Under optimal conditions, the model drug methylthioninium chloride (MC) was degraded and several parameters were assessed, such as the water matrix and the catalyst reutilization, a possibility given the addition of H2O2. The results in terms of energy consumption compete with those attained for the treatment of this model pollutant, opening a path for further research.

Deep Eutectic Solvent Synthesis of Perovskite Electrocatalysts for Water Oxidation.

Oxide perovskites have attracted great interest as materials for energy conversion due to their stability and structural tunability. La-based perovskites of 3d-transition metals have demonstrated excellent activities as electrocatalysts in water oxidation. Herein, we report the synthesis route to La-based perovskites using an environmentally friendly deep eutectic solvent (DES) consisting of choline chloride and malonic acid. The DES route affords phase-pure crystalline materials on a gram scale and results in perovskites with high electrocatalytic activity for oxygen evolution reaction. A convenient, fast, and scalable synthesis proceeds via assisted metathesis at a lower temperature as compared to traditional solid-state methods. Among LaCoO3, LaMn0.5Ni0.5O3, and LaMnO3 perovskites prepared via the DES route, LaCoO3 was established to be the best-performing electrocatalyst for water oxidation in alkaline medium at 0.25 mg cm-2 mass loading. LaCoO3 exhibits current densities of 10, 50, and 100 mA cm-2 at respective overpotentials of approximately 390, 430, and 470 mV, respectively, and features a Tafel slope of 55.8 mV dec-1. The high activity of LaCoO3 as compared to the other prepared perovskites is attributed to the high concentration of oxygen vacancies in the LaCoO3 lattice, as observed by high-resolution transmission electron microscopy. An intrinsically high concentration of O vacancies in the LaCoO3 synthesized via the DES route is ascribed to the reducing atmosphere attained upon thermal decomposition of the DES components. These findings will contribute to the preparation of highly active perovskites for various energy applications.

Discovery of Colossal Breathing-Caloric Effect under Low Applied Pressure in the Hybrid Organic-Inorganic MIL-53(Al) Material.

In this work, "breathing-caloric" effect is introduced as a new term to define very large thermal changes that arise from the combination of structural changes and gas adsorption processes occurring during breathing transitions. In regard to cooling and heating applications, this innovative caloric effect appears under very low working pressures and in a wide operating temperature range. This phenomenon, whose origin is analyzed in depth, is observed and reported here for the first time in the porous hybrid organic-inorganic MIL-53(Al) material. This MOF compound exhibits colossal thermal changes of ΔS ∼ 311 J K-1 kg-1 and ΔH ∼ 93 kJ kg-1 at room temperature (298 K) and under only 16 bar, pressure which is similar to that of common gas refrigerants at the same operating temperature (for instance, p(CO2) ∼ 64 bar and p(R134a) ∼ 6 bar) and noticeably lower than p > 1000 bar of most solid barocaloric materials. Furthermore, MIL-53(Al) can operate in a very wide temperature range from 333 K down to 254 K, matching the operating requirements of most HVAC systems. Therefore, these findings offer new eco-friendly alternatives to the current refrigeration systems that can be easily adapted to existing technologies and open the door to the innovation of future cooling systems yet to be developed.

Polar Layered Intermetallic LaCo2P2 as a Water Oxidation Electrocatalyst.

We investigate LaCo2P2 as an electrocatalytic material for oxygen evolution reaction (OER) under alkaline and acidic conditions. This layered intermetallic material was prepared via Sn-flux high-temperature annealing. The electrocatalytic ink, prepared with the ball-milled LaCo2P2 catalyst at the mass loading of 0.25 mg/cm2, shows OER activity at pH = 14, reaching current densities of 10, 50, and 100 mA/cm2 under the overpotential of 400, 440, and 460 mV, respectively. Remarkably, the electrocatalytic performance remains constant for at least 4 days. Transmission electron microscopy reveals the formation of a catalytically active CoOx shell around the pre-catalyst LaCo2P2 core during the alkaline OER. The core serves as a robust support for the in situ-formed electrocatalytic system. Similar studies under pH = 0 reveal the rapid deterioration of LaCo2P2, with the formation of LaPO4 and amorphous cobalt oxide. This study shows the viability of layered intermetallics as stable OER electrocatalysts, although further developments are required to improve the electrocatalytic performance and increase the stability at lower pH values.

Large-scale aqueous synthesis of Cu(In,Ga)Se2 nanoparticles for photocatalytic degradation of ciprofloxacin.

Environmentally friendly synthesis of Cu(In,Ga)Se2 (CIGS) nanoparticles (NPs) is pivotal for producing sustainable photocatalytic compounds to be applied in the remediation of contaminants of emerging concern from water. To this end, we herein report an aqueous synthesis of CIGS NPs, followed by annealing, to give access to phase-pure CIGS crystals with chalcopyrite structure and no signs of secondary phases. Morphological and compositional characterization revealed NPs with an average size of 10-35 nm and uniform distribution of Cu, In, Ga, and Se elements. In addition, the first aqueous large-scale synthesis of CIGS NPs is developed by up-scaling the synthesis procedure, resulting in 5 g of highly crystalline nanoparticles exhibiting an ideal optical band gap of 1.14 eV. The as-synthesized NPs proved the ability to remove 71 and 83% of a contaminant of emerging concern, ciprofloxacin (CIP), under ultraviolet (UV) and visible (Vis) radiations, respectively.

Eco-friendly and cost-efficient inks for screen-printed fabrication of copper indium gallium diselenide photoabsorber thin films.

Given the societal concerns about the use of toxic chemicals and costly fabrication of functional materials and devices for photovoltaic applications, it is important to develop alternative sustainable methodologies. Previous studies have shown that cost-effective printing fabrication of Cu(In,Ga)Se2 thin film photovoltaics represents an interesting alternative to energy-demanding vacuum-based deposition methods, commonly used to produce Cu(In,Ga)Se2 photovoltaics. To enrich the field of printed Cu(In,Ga)Se2 photoabsorber thin films and to develop associated eco-friendly solutions, two novel inks, consisting of non-toxic reagents and readily available oxide materials, are reported. Screen printing of the inks over fluorine-doped tin oxide conductive substrates followed by swift selenization of the resultant patterns provides a straightforward route to phase-pure, uniform, and compact Cu(In,Ga)Se2 films with thickness and band gap energies ranging from 2.5 µm to 3.5 µm and from 0.97 eV to 1.08 eV, respectively. The present approach represents an important step forward in the sustainable fabrication of Cu(In,Ga)Se2 photovoltaics, where the physical properties of the photoabsorber can be easily adjusted by tuning the conditions of the screen printing process and the metal ratios in the inks.

Large-Scale Synthesis of Semiconducting Cu(In,Ga)Se2 Nanoparticles for Screen Printing Application.

During the last few decades, the interest over chalcopyrite and related photovoltaics has been growing due the outstanding structural and electrical properties of the thin-film Cu(In,Ga)Se2 photoabsorber. More recently, thin film deposition through solution processing has gained increasing attention from the industry, due to the potential low-cost and high-throughput production. To this end, the elimination of the selenization procedure in the synthesis of Cu(In,Ga)Se2 nanoparticles with following dispersion into ink formulations for printing/coating deposition processes are of high relevance. However, most of the reported syntheses procedures give access to tetragonal chalcopyrite Cu(In,Ga)Se2 nanoparticles, whereas methods to obtain other structures are scarce. Herein, we report a large-scale synthesis of high-quality Cu(In,Ga)Se2 nanoparticles with wurtzite hexagonal structure, with sizes of 10-70 nm, wide absorption in visible to near-infrared regions, and [Cu]/[In + Ga] ≈ 0.8 and [Ga]/[Ga + In] ≈ 0.3 metal ratios. The inclusion of the synthesized NPs into a water-based ink formulation for screen printing deposition results in thin films with homogenous thickness of ≈4.5 µm, paving the way towards environmentally friendly roll-to-roll production of photovoltaic systems.

Discovery of Real-Space Topological Ferroelectricity in Metallic Transition Metal Phosphides.

Ferroelectric metals-with coexisting ferroelectricity and structural asymmetry-challenge traditional perceptions because free electrons screen electrostatic forces between ions, the driving force of breaking the spatial inversion symmetry. Despite ferroelectric metals having been unveiled one after another, topologically switchable polar objects with metallicity have never been identified so far. Here, the discovery of real-space topological ferroelectricity in metallic and non-centrosymmetric Ni2 P is reported. Protected by the rotation-inversion symmetry operation, it is found that the balanced polarity of alternately stacked polyhedra couples intimately with elemental valence states, which are verified using quantitative electron energy-loss spectroscopy. First-principles calculations reveal that an applied in-plane compressive strain creates a tunable bilinear double-well potential and reverses the polyhedral polarity on a unit-cell scale. The dual roles of nickel cations, including polar displacement inside polyhedral cages and a 3D bonding network, facilitate the coexistence of topological polarity with metallicity. In addition, the switchable in-plane polyhedral polarity gives rise to a spin-orbit-coupling-induced spin texture with large momentum-dependent spin splitting. These findings point out a new direction for exploring valence-polarity-spin correlative interactions via topological ferroelectricity in metallic systems with structural asymmetry.

1D materials from ionic self-assembly in mixtures containing chromonic liquid crystal mesogens.

Ionic self-assembly is a simple yet powerful method to obtain robust nanostructures. Herewith, we use mixtures of oppositely-charged porphyrins that can act as mesogens to form chromonic liquid crystals in water, i.e., molecular stacks with orientational (nematic) or positional (hexagonal) order. Electrostatic locking coupled with π-π interactions between aromatic groups within the stacks, together with inter-stack hydrogen bonding induce formation of all-organic crystalline nanofibers with high aspect ratio (a few tenths of nanometers in width but several tenths of micrometers in length) and that display branching. The nanofibers prepared from metal-free porphyrin units feature interesting optical properties, including an absorption spectrum that is different from the simple sum of the individual spectra of the components, which is attributed to a striking aggregation-induced chromism. When in contact with some polar organic solvents the materials become fluorescent, as a result of disaggregation. In a proof-of-concept, the obtained self-assembled one-dimensional (1D) materials were carbonized (yield ca. 60%) to produce nitrogen-doped carbon nanofibers that can be used as active electrode materials for energy storage applications.

Structural properties of PbTe quantum dots revealed by high-energy x-ray diffraction.

High-energy X-ray diffraction (HE-XRD) experiments combined with an analysisbased on atomic-pair-distribution functions can be an effective tool for probing low-dimensional materials. Here, we show how such an analysis can be used to gain insightinto structural properties of PbTe nanoparticles. We interpret our HE-XRD data using anorthorhombic Pnma phase of PbTe, which is an orthorhombic distortion of the rocksalt phase.Although local crystal geometry can vary substantially with particle size at scales below 10 nm,and for very small nanoparticles the particle size itself influences X-ray diffraction patterns,our study shows that HE-XRD can provide a unique nano-characterization tool for unravelingstructural properties of nanoscale systems.

Crystallographic facet selective HER catalysis: exemplified in FeP and NiP2 single crystals.

How the crystal structures of ordered transition-metal phosphide catalysts affect the hydrogen-evolution reaction (HER) is investigated by measuring the anisotropic catalytic activities of selected crystallographic facets on large (mm-sized) single crystals of iron-phosphide (FeP) and monoclinic nickel-diphosphide (m-NiP2). We find that different crystallographic facets exhibit distinct HER activities, in contrast to a commonly held assumption of severe surface restructuring during catalytic activity. Moreover, density-functional-theory-based computational studies show that the observed facet activity correlates well with the H-binding energy to P atoms on specific surface terminations. Direction dependent catalytic properties of two different phosphides with different transition metals, crystal structures, and electronic properties (FeP is a metal, while m-NiP2 is a semiconductor) suggests that the anisotropy of catalytic properties is a common trend for HER phosphide catalysts. This realization opens an additional rational design for highly efficient HER phosphide catalysts, through the growth of nanocrystals with specific exposed facets. Furthermore, the agreement between theory and experimental trends indicates that screening using DFT methods can accelerate the identification of desirable facets, especially for ternary or multinary compounds. The large single-crystal nature of the phosphide electrodes with well-defined surfaces allows for determination of the catalytically important double-layer capacitance of a flat surface, C dl = 39(2) µF cm-2 for FeP, useful for an accurate calculation of the turnover frequency (TOF). X-ray photoelectron spectroscopy (XPS) studies of the catalytic crystals that were used show the formation of a thin oxide/phosphate overlayer, presumably ex situ due to air-exposure. This layer is easily removed for FeP, revealing a surface of pristine metal phosphide.

Scalable colloidal synthesis of Bi2Te2.7Se0.3 plate-like particles give access to a high-performing n-type thermoelectric material for low temperature application.

Colloidal synthesis is harnessed for the gram-scale preparation of hexagonal-shaped plate-like Bi2Te2.7Se0.3 particles, yielding nearly 5 g of the product in one experiment. The resultant textured particles are highly crystalline, phase-pure, chemically uniform, and can serve as a starting material for the preparation of bulk thermoelectrics for room temperature applications. The consolidation occurs via spark plasma sintering, which affords nanostructured n-type Bi2Te2.7Se0.3 material exhibiting a high figure of merit ZT ≈ 1 at 373 K with an average ZT ≈ 0.93 (300-473 K). Our experimental and theoretical studies indicate that the high thermoelectric performance is attributed to a favorable combination of the resultant transport properties. Specifically, bottom-up formation of the plate-like particles results in the substantial reduction of thermal conductivity by nanostructuring as observed experimentally and can be ascribed to phonon scattering at grain boundaries and suppressed bipolar conduction. When coupled with high electrical conductivity, which is preserved at the bulk scale as confirmed by ab initio calculations, these factors boost the thermoelectric performance of the as-synthesized n-type Bi2Te2.7Se0.3 bulk nanostructured alloy to the state-of-the-art level. The combination of a newly developed scalable colloidal synthesis with optimized spark plasma sintering constitutes a convenient route to nanostructured bulk thermoelectrics, which is an interesting pathway for the preparation of simple and complex thermoelectric chalcogenides.

Electrocatalytic water oxidation over AlFe2B2.

We report excellent electrocatalytic performance by AlFe2B2 in the oxygen-evolution reaction (OER). The inexpensive catalytic material, prepared simply by arc-melting followed by ball-milling, exhibits high stability and sustained catalytic performance under alkaline conditions. The overpotential value of 0.24 V observed at the current density of 10 mA cm-2 remained constant for at least 10 days. Electron microscopy and electron energy loss spectroscopy performed on the initial ball-milled material and on the material activated under electrocatalytic conditions suggest that the catalytic mechanism involves partial leaching of Al from the layered structure of AlFe2B2 and the formation of Fe3O4 nanoclusters on the exposed [Fe2B2] layers. Thus, the AlFe2B2 structure serves as a robust supporting material and, more importantly, as a pre-catalyst to the in situ formed active electrocatalytic sites. Comparative electrochemical measurements demonstrate that the electrocatalytic performance of the AlFe2B2-supported Fe3O4 nanoclusters substantially exceeds the results obtained with unsupported nanoparticles of Fe3O4, FeB, or such benchmark OER catalysts as IrO2 or RuO2. The excellent catalytic performance and long-term stability of this system suggests that AlFe2B2 can serve as a promising and inexpensive OER electrocatalyst.

Recyclable magnetic covalent organic framework for the extraction of marine biotoxins.

A novel procedure for the preparation of magnetic covalent organic frameworks (COFs) is reported. In situ functionalization of Fe3O4 with dopamine rapidly afforded amino-functionalized magnetic nanoparticles, which after decoration with a COF building block and subsequent COF growth gave access to magnetic composite mTpBD-Me2. The optimized synthesis conditions yielded crystalline and superparamagnetic material with no loss in surface area as compared to bulk COF. The composite material was employed for the first time in magnetic solid-phase extraction of marine biotoxins from seawater with high efficiency, where calculated maximum adsorption capacities of 812 mg g-1 and 830 mg g-1 were found for okadaic acid (OA) and dinophysistoxin-1 (DTX-1), respectively, corresponding to an increase of ∼500-fold for OA and ∼300-fold for DTX-1 as compared to the commonly used non-magnetic macroporous resins. Nearly quantitative desorption efficiency of both biotoxins was obtained using 2-propanol as solvent, rendering the composite materials recyclable with merely minor losses in adsorption capacity after five consecutive cycles of adsorption/desorption. In addition, retention of crystallinity after the adsorption cycles highlights the stability of the composite in seawater. These results illustrate the great efficiency of the novel material in biotoxin adsorption and show great promise for its application in environmental monitoring programs.

Template-directed self-organization of colloidal PbTe nanocrystals into pillars, conformal coatings, and self-supported membranes.

We demonstrate the formation of three morphologies relevant for integration with miniaturized devices-microscale pillars, conformal coatings, and self-supported membranes-via template-directed self-organization of lead telluride (PbTe) colloidal nanocrystals (NCs). Optimizing the self-organization process towards producing one of these morphologies typically involves adjusting the surface chemistry of the particles, as a means of controlling the particle-particle and particle-template interactions. In contrast, we have produced each of the three morphologies of close-packed NCs by adjusting only the solvent and concentration of NCs, to ensure that the high quality of the ca. 10 nm PbTe NCs produced by hot-injection colloidal synthesis, which we used as model "building blocks," remains consistent across all three configurations. For the first two morphologies, the NCs were deposited as colloidal suspensions onto micropatterned silicon substrates. The microscale cuboid pillars (1 µm × 1 µm × 0.6 µm) were formed by depositing NC dispersions in toluene onto templates patterned with resist grid motifs, followed by the resist removal after the slow evaporation of toluene and formation of the micropillars. Conformal coatings were produced by switching the solvent from toluene to a faster drying hexane and pouring NC dispersions onto silicon templates with topographically patterned microstructures. In a similar process, self-supported NC membranes were formed from NC dispersions in hexane on the surface of diethylene glycol and transferred onto the micropatterned templates. The demonstrated combination of bottom-up self-organization with top-down micropatterned templates provides a scalable route for design and fabrication of NC ensembles in morphologies and form-factors that are compatible with their integration into miniaturized devices.