Fast QoT estimation method using cascaded artificial neural network for real-time path provisioning in IMDD based all-optical networks.

We propose a fast quality of transmission (QoT) estimation method based on cascaded artificial neural networks (ANNs) for intensity modulation-direct detection (IMDD) systems. The proposed method can calculate the bit error rate of three-span 36 km transmission within 0.7 seconds while taking account of the deterministic waveform distortion caused by the chromatic dispersion and self-phase modulation (SPM).

Simultaneous reception of AMCC signals and QPSK signals by a single coherent receiver with DSP.

This paper investigates an auxiliary management and control channel (AMCC) signal extraction method using digital signal processing (DSP) blocks with 3-step moving averaging that allows a single coherent receiver to receive main signal and AMCC signal simultaneously. Receiver sensitivity characteristics versus the modulation index (MI) and average number of the proposed DSP blocks are elucidated. Based on the results, we discuss a policy for designing the parameters. Experiments apply the design policy to achieve receiver sensitivity of -41.8 dBm with both 25 Gbit/s QPSK main signal and 128 kbit/s AMCC signal; the main signal sensitivity penalty is just 0.2 dB.

Symmetric 10 Gbit/s 40-km reach DSP-based TDM-PON with a power budget over 50†dB.

This paper introduces the concept of a symmetric 10 Gbit/s high power-budget TDM-PON based on digital coherent technology and confirms its feasibility through a bidirectional transmission experiment with a transmission distance of 40 km and power budget of more than 50 dB. Burst-mode upstream 10 Gbit/s binary-phase-shift-keying (BPSK) signals synchronized by the clock recovered from downstream 10 Gbit/s NRZ signals are detected by using an optical pre-amplifier and coherent detection based on real-time burst-mode digital signal processing (DSP) in the optical line terminal (OLT). The real-time DSP implements coefficient handover in the adaptive equalizer to allow the reception of burst-mode upstream BPSK signals with short preamble length. An experimental bit error performance evaluation of the real-time burst-mode DSP yields the receiver sensitivity of -45.1 dBm for upstream burst-mode BPSK with a preamble length of 1.3 µs. For downstream signals, the receiver sensitivity of -38.9 dBm is achieved by using a chirp-controlled transmitter with optical post-amplifier so as to avoid the signal distortion created by the chromatic dispersion of single mode fiber (SMF) when the launched power is increased.