Evolution of Intermediates during Capsid Assembly of Hepatitis B Virus with Phenylpropenamide-Based Antivirals.

Self-assembly of virus capsids is a potential target for antivirals due to its importance in the virus lifecycle. Here, we investigate the effect of phenylpropenamide derivatives B-21 and AT-130 on the assembly of hepatitis B virus (HBV) core protein. Phenylpropenamides are widely believed to yield assembly of spherical particles resembling native, empty HBV capsids. Because the details of assembly can be overlooked with ensemble measurements, we performed resistive-pulse sensing on nanofluidic devices with four pores in series to characterize the size distributions of the products in real time. With its single particle sensitivity and compatibility with typical assembly buffers, resistive-pulse sensing is well-suited for analyzing virus assembly in vitro. We observed that assembly with B-21 and AT-130 produced a large fraction of partially complete virus particles that may be on-path, off-path, or trapped. For both B-21 and AT-130, capsid assembly was more sensitive to disruption under conditions where the interprotein association energy was low at lower salt concentrations. Dilution of the reaction solutions led to the rearrangement of the incomplete particles and demonstrated that these large intermediates may be on-path, but are labile, and exist in a frustrated dynamic equilibrium. During capsid assembly, phenylpropenamide molecules modestly increase the association energy of dimers, prevent intermediates from dissociating, and lead to kinetic trapping where the formation of too many capsids has been initiated, which results in both empty and incomplete particles.

Competition between Normative and Drug-Induced Virus Self-Assembly Observed with Single-Particle Methods.

Disruption of virus capsid assembly has compelling antiviral potential that has been applied to hepatitis B virus (HBV). HBV core protein assembly can be modulated by heteroaryldihydropyrimidines (HAPs), and such molecules are collectively termed core protein allosteric modulators (CpAMs). Although the antiviral effects of CpAMs are acknowledged, the mechanism of action remains an open question. Challenging aspects of characterizing misdirected assembly are the large size and nonuniform nature of the final particles. In this study of HBV assembly, we observed a competition between normative and CpAM-induced aberrant assembly with electron microscopy and resistive-pulse sensing on nanofluidic devices. This competition was a function of the strength of the association energy between individual core proteins, which is proportional to ionic strength. At strong association energy, assembly reactions primarily yielded morphologically normal HBV capsids, despite the presence of HAP-TAMRA. At weak association energy, HAP-TAMRA led to increased assembly product size and disrupted morphology. The smallest particles were T = 4 icosahedra, whereas the larger particles were defective spheres, ellipsoids, and bacilliform cylinders, with regions of T = 4 geometry interspersed with flat regions. Deviation from spherical geometry progressively increased with particle size, which is consistent with the interpretation of a competition between two alternative assembly pathways.

Characterization of Virus Capsids and Their Assembly Intermediates by Multicycle Resistive-Pulse Sensing with Four Pores in Series.

Virus self-assembly is a critical step in the virus lifecycle. Understanding how viruses assemble and disassemble provides needed insight into developing antiviral pharmaceuticals. Few tools offer sufficient resolution to study assembly intermediates that differ in size by a few dimers. Our goal is to improve resistive-pulse sensing on nanofluidic devices to offer better particle-size and temporal resolution to study intermediates and capsids generated along the assembly pathway. To increase the particle-size resolution of the resistive-pulse technique, we measured the same, single virus particles up to a thousand times, cycling them back and forth across a series of nanopores by switching the polarity of the applied potential, i.e., virus ping-pong. Multiple pores in series provide a unique multipulse signature during each cycle that improves particle tracking and, therefore, identification of a single particle and reduces the number of cycles needed to make the requisite number of measurements. With T = 3 and T = 4 hepatitis B virus (HBV) capsids, we showed the standard deviation of the particle-size distribution decreased with the square root of the number of measurements and approached discriminating particles differing in size by single dimers. We then studied in vitro assembly of HBV capsids and observed that the ensemble of intermediates shift to larger sizes over 2 days of annealing. On the contrary, assembly reactions diluted to lower dimer concentrations an hour after initiation had fewer intermediates that persisted after the 2 day incubation and had a higher ratio of T = 4 to T = 3 capsids. These reactions indicate that labile T = 4 intermediates are formed rapidly, and dependent on conditions, intermediates may be trapped as metastable species or progress to yield complete capsids.

A molecular breadboard: Removal and replacement of subunits in a hepatitis B virus capsid.

Hepatitis B virus (HBV) core protein is a model system for studying assembly and disassembly of icosahedral structures. Controlling disassembly will allow re-engineering the 120 subunit HBV capsid, making it a molecular breadboard. We examined removal of subunits from partially crosslinked capsids to form stable incomplete particles. To characterize incomplete capsids, we used two single molecule techniques, resistive-pulse sensing and charge detection mass spectrometry. We expected to find a binomial distribution of capsid fragments. Instead, we found a preponderance of 3 MDa complexes (90 subunits) and no fragments smaller than 3 MDa. We also found 90-mers in the disassembly of uncrosslinked HBV capsids. 90-mers seem to be a common pause point in disassembly reactions. Partly explaining this result, graph theory simulations have showed a threshold for capsid stability between 80 and 90 subunits. To test a molecular breadboard concept, we showed that missing subunits could be refilled resulting in chimeric, 120 subunit particles. This result may be a means of assembling unique capsids with functional decorations.

Nanofluidic Devices with 8 Pores in Series for Real-Time, Resistive-Pulse Analysis of Hepatitis B Virus Capsid Assembly.

To improve the precision of resistive-pulse measurements, we have used a focused ion beam instrument to mill nanofluidic devices with 2, 4, and 8 pores in series and compared their performance. The in-plane design facilitates the fabrication of multiple pores in series which, in turn, permits averaging of the series of pulses generated from each translocation event. The standard deviations (σ) of the pulse amplitude distributions decrease by 2.7-fold when the average amplitudes of eight pulses are compared to the amplitudes of single pulses. Similarly, standard deviations of the pore-to-pore time distributions decrease by 3.2-fold when the averages of the seven measurements from 8-pore devices are contrasted to single measurements from 2-pore devices. With signal averaging, the inherent uncertainty in the measurements decreases; consequently, the resolution (mean/σ) improves by a factor equal to the square root of the number of measurements. We took advantage of the improved size resolution of the 8-pore devices to analyze in real time the assembly of Hepatitis B Virus (HBV) capsids below the pseudocritical concentration. We observe that abundances of assembly intermediates change over time. During the first hour of the reaction, the abundance of smaller intermediates decreased, whereas the abundance of larger intermediates with sizes closer to a T = 4 capsid remained constant.