ABSTRACT
Orbital angular momentum (OAM) beams with different angular indices l have the potential to greatly increase communication capacity. However, the finite aperture of optical systems limits the value of the angular index. In order to fully use the orthogonal mode channels supported in the fiber for high-capacity communications, we propose extending the radial indices p of OAM modes as an additional multiplexing dimension. In this paper, we introduce spatially discrete multiple phase planes to multiplex the angular and radial OAM modes simultaneously. Due to the orthogonal property of the central symmetric OAM modes, a two-dimensional (2D) input Gaussian beams array can be converted to coaxial OAM modes through Cartesian to log-polar coordinate transformation by inverse design. For a proof-of-concept demonstration, a 10-mode multiplexer for high-order radial OAM modes was designed using five phase planes. The fabricated multiplexer generated high-quality multiplexed OAM modes with a loss of less than 5.4â dB. The multiplexed OAM modes were coupled into a specially designed ring-core fiber by mode-field matching, achieving stable mode transmission in 2â km fiber. The approach provides a scalable technology to increase the number of transmission channels and could lead to the practical applications of OAM multiplexing in communication.
Subject(s)
Optical Devices , Motion , Normal DistributionABSTRACT
The combination of wavelength division multiplexing (WDM) and mode division multiplexing (MDM) will increase the optical communication capacity significantly. In this configuration, we need multiple WDM devices serving as the inputs of the MDM device to excite modes at all the wavelengths. However, there is still no demonstration of integrated parallel WDM devices specifically designed for wavelength-mode hybrid multiplexing. Here, we propose and demonstrate a single 2 × 8 arrayed waveguide grating (AWG) for the multiplexing of 2 linearly polarized (LP) modes at 4 wavelengths with an MDM device. This parallel AWG concept can be further extended to support more wavelengths and introduce more spatial modes for high-capacity data transmission.
ABSTRACT
The linear polarized (LP) mode multiplexer based on the inverse designed multi-plane light conversion (MPLC) has the advantages of low insertion loss and low mode crosstalk. However, the multiplexer also requires the fabrication and alignment accuracy in experiments, which have not been systematically analyzed. Here, we perform the error tolerance analysis of the MPLC and summarize the design rules for the LP mode multiplexer/demultiplexer. The error tolerances in the fabrication process and experimental demonstration are greatly released with proper parameters of the input/output optical beam waist, the pitch of optical beam array, and the propagation distances between the phase plane. To proof this design rule, we experimentally demonstrate the LP mode multiplexer generating LP01, LP11a, LP11b, LP21 modes and coupling to the few mode fiber, with the insertion loss lower than -5 dB. The LP modes are demultiplexed by MPLC, with the crosstalk of different mode groups lower than -10 dB. LP modes carrying 10 Gbit/s on-off keying signals transmit in a 5 km few mode fiber. The measured bit error rates (BER) curves of the LP01, LP11a, LP21 modes have the power penalties lower than 12 dB.
ABSTRACT
Passive radiative cooling, which pumps heat to outer space via thermal radiation, has been a promising energy free technology to maintain the earth surface temperature. Nighttime radiative cooling technology is quite mature, while daytime radiative cooling still poses many challenges due to the requirement of minimization of incident solar absorption and maximization of the mid-infrared emissivity in the atmospheric transparency windows. However, the mid-infrared emissivity efficiency of natural materials is usually poor, providing a low cooling efficiency and the realization of a high performance daytime radiative cooler is still quite challenge. In this work, we design and numerically investigate a three dimensional (3D) all-dielectric pyramidal multilayer metamaterial (PMM), which not only avoids the problem of high absorptivity loss of metal materials to solar, but also provide extremely high infrared absorptivity due to the attenuation effect of moth-eye structure and the electromagnetic resonant absorption in the metamaterial, achieving the purpose of both extremely low solar spectrum absorption and strong infrared emissivity within the atmospheric windows under the direct sunlight. Eventually, our designed cooler presents the potential to achieve a net radiative cooling power exceeding 156 W/m2 at ambient temperature of 300 K under direct solar irradiation, leading to a temperature reduction of 42.4°C. At nighttime, the net cooling power is more than 199 W/m2 at ambient temperature, resulting in a temperature reduction of 58.5°C. Even considering the non-radiative heat exchange conditions, this metamaterial cooler can still cool down 9.6°C at the daytime and 12.3°C at the nighttime respectively. Therefore, this work further promotes the development of all-dielectric metamaterial based passive radiative coolers and is of great significance for energy conservation.
