The impact of public environmental preferences and government environmental regulations on corporate pollution emissions.

The Chinese government has attached great importance to pollution emission reduction. Since public environmental preference plays an important role in curbing polluting emissions by companies, this paper aims to explore the impact of public environmental preference and government environmental regulation on corporate pollution emissions. The coordinating role of environmental preference in the implementation of environmental regulatory policies is analyzed using pollution emission data of Chinese enterprises. The results show that both environmental preference and environmental regulation have significant inhibitory effects on corporate pollution emissions. The inhibitory effects are achieved by promoting the green technology progress. With high environmental preference, environmental regulation can effectively curb corporate emissions. This paper is helpful for policy makers to formulate ecological and environmental protection policies and cultivate public environmental preferences.

A Multifunctional Co-Based Metal-Organic Framework as a Platform for Proton Conduction and Ni trophenols Reduction.

The design and development of proton conduction materials for clean energy-related applications is obviously important and highly desired but challenging. An ultrastable cobalt-based metal-organic framework Co-MOF, formulated as [Co2(btzip)2(µ2-OH2)] (namely, LCUH-103, H2btzip = 4, 6-bis(triazol-1-yl)-isophthalic acid) had been successfully synthesized via the hydrothermal method. LCUH-103 exhibits a three-dimensional framework and a one-dimensional microporous channel structure with scu topology based on the binuclear metallic cluster {Co2}. LCUH-103 indicated excellent chemical and thermal stability; peculiarly, it can retain its entire framework in acid and alkali solutions with different pH values for 24 h. The excellent stability is a prerequisite for studying its proton conductivity, and its proton conductivity σ can reach up to 1.25 × 10-3 S·cm-1 at 80 °C and 100% relative humidity (RH). In order to enhance its proton conductivity, the proton-conducting material Im@LCUH-103 had been prepared by encapsulating imidazole molecules into the channels of LCUH-103. Im@LCUH-103 indicated an excellent proton conductivity of 3.18 × 10-2 S·cm-1 at 80 °C and 100% RH, which is 1 order of magnitude higher than that of original LCUH-103. The proton conduction mechanism was systematically studied by various detection means and theoretical calculations. Meanwhile, LCUH-103 is also an excellent carrier for palladium nanoparticles (Pd NPs) via a wetness impregnation strategy, and the nitrophenols (4/3/2-NP) reduction in aqueous solution by Pd@LCUH-103 indicated an outstanding conversion efficiency, high rate constant (k), and exceptional cycling stability. Specifically, the k value of 4-NP reduction by Pd@LCUH-103 is superior to many other reported catalysts, and its k value is as high as 1.34 min-1 and the cycling stability can reach up to 6 cycles. Notably, its turnover frequency (TOF) value is nearly 196.88 times more than that of Pd/C (wt 5%) in the reaction, indicating its excellent stability and catalytic activity.

Synthesis and Characterization of Solution-Processible Donor-Acceptor Electrochromic Conjugated Copolymers Based on Quinoxalino[2',3':9,10]phenanthro[4,5-abc]phenazine as the Acceptor Unit.

Donor-acceptor (D-A) type conjugated polymers are of high interest in the field of electrochromism. In this study, three novel conjugated copolymers (PBPE-1, PBPE-2 and PBPE-3) based on quinoxalino[2',3':9,10]phenanthro[4,5-abc]phenazine (A) as the acceptor unit and 4,8-bis((2-octyldodecyl)oxy)benzo[1,2-b:4,5-b']dithiophene (D1) and 3,3-didecyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine (ProDOT-decyl2, D2) as the donor units with different donor-to-acceptor ratios were successfully synthesized through Stille coupling polymerization. The polymers were then characterized by cyclic voltammetry (CV), fourier transform infrared (FT-IR) spectoscopy, X-ray photoelectron spectroscopy (XPS), spectroelectrochemistry, thermogravimetry (TG), electrochromic switching and colorimetry. Optical band gap values were calculated as 1.99 eV, 2.02 eV and 2.03 eV, respectively. The three copolymers have good solubility, distinct redox peaks, wide absorption spectra, good thermal stabilities, bright color changes and significant electrochromic switching properties. Compared to the other two copolymers, the PBPE-3 film exhibited high coloration efficiency values of 513 cm2·C-1 at 504 nm and 475 cm2·C-1 at 1500 nm. The films have the advantage of exhibiting cathodic and anodic coloration.

Series of TM-OFs as a Platform for Efficient Catalysis and Multifunctional Luminescence Sensing.

Three novel porous transition-metal-organic frameworks (TM-OFs), formulated as [Co3(DCPN)2(µ2-OH2)4(H2O)4](DMF)2 (1), [Cd3(DCPN)2(µ2-OH2)4(H2O)4](DMF)2 (2), and [CdK(DCPN)(DMA)] (3), have been successfully prepared via solvothermal conditions based on a 5-(3',6'-dicarboxylic phenyl) nicotinic carboxylic acid (H3DCPN) ligand. 1 and 2 both have the same porous 3D network structure with the point symbol of {410·614·84}·{45·6}2 based on trinuclear ({Co3} or {Cd3}) clusters, indicating a one-dimensional porous channel, and possess excellent water and thermal stability; 3 also displays a porous 3D network structure with a 4-connected sra topology based on the heteronuclear metal cluster {CdK}. Complex 1 can be used to load Pd nanoparticles (Pd NPs) via a wetness impregnation strategy to obtain Pd@1. The reduction of nitrophenols (2-NP, 3-NP, 4-NP) by Pd@1 in aqueous solution shows outstanding conversion, excellent rate constants (k), and remarkable cycling stability due to the synergistic effect of complex 1 and Pd NPs. Luminescence sensing tests confirmed that 2 is a reliable multifunctional chemical sensor with high selectivity and sensitivity for low concentrations of Fe3+, Cr2O72-, CPFX, and NFX. Specifically, 2 shows a fluorescence enhancement behavior toward fluoroquinolone antibiotics (CPFX and NFX), which has not been reported previously in the literature. Moreover, the rational mechanism of fluorescence sensing was also systematically investigated by various detection means and theoretical calculations.

Spatiotemporal Pattern of Urban-Rural Integration Development and Its Driving Mechanism Analysis in Hangzhou Bay Urban Agglomeration.

The quantitative analysis of the urban-rural integration development (URID) level and its driving factors is of great significance for the new-type urbanization of urban agglomerations. This study constructed a multidimensional framework in the perspective of a population-space-economy-society-ecology framework to measure the URID level from 2000 to 2020 and further explored the driving mechanism of the URID changes by a geographical detector model in the Hangzhou Bay urban agglomeration (HBUA). The results showed that the land-use change in the HBUA from 2000 to 2020 showed a typical characteristic of the transition between cultivated and construction land. The URID level in the HBUA improved from 0.294 in 2000 to 0.563 in 2020, and the year 2005 may have been the inflection point of URID in the HBUA. The URID level showed a significant spatial aggregation with high values. Hangzhou, Jiaxing, and Ningbo were hot spots since 2015, and the cold spots were Huzhou and Shaoxing. The population and spatial integration had more important impacts on URID levels in 2000, 2005, and 2020, while economic and social integration had more significant impacts on URID levels in 2010 and 2015. This study provided a deeper understanding of the evolution of URID in an urban agglomeration and could be used as a reference for decision makers.

The synthesis of triazine-thiophene-thiophene conjugated porous polymers and their composites with carbon as anode materials in lithium-ion batteries.

The polymers based on thiophene armed triazine and different thiophene derivatives including thiophene (Th), thieno[3,2-b]thiophene (TT), dithieno[3,2-b:2',3'-d]thiophene (DTT) or thieno[2',3':4,5]thieno[3,2-b]thieno[2,3-d]thiophene (TTTT) are synthesized through a Stille coupling reaction. By introducing thiophene derivatives with increasing sizes as the linkage units (from thiophene, DT to DTT, TTTT), the band gaps (E g) of the resultant polymers decrease continuously. Then the composite materials (polymer@C) between polymers and Vulcan XC-72 carbon are prepared by in situ polymerization to test their electrochemical performances in lithium ion batteries. The synthesized composites show distinct morphologies due to the different linkage units of thiophene or fused cyclothiophene derivatives and the cross-linked structure can be found in composites with the longer thiophene derivatives (bridging molecules) like PTT-3@C and PTT-4@C, which are expected to be beneficial to improve the performances of the electrode materials. The specific capacities of the composites are 495 mA h g-1, 671 mA h g-1, 707 mA h g-1, and 772 mA h g-1 for PTT-1@C, PTT-2@C, PTT-3@C and PTT-4@C at a current density of 100 mA g-1, respectively. In particular, benefiting from the enlarged conjugation length and planarity of the linkage units, the conjugated microporous polymers could deliver continuously improved capacities.

Synthesis and Characterization of Novel D-A Type Neutral Blue Electrochromic Polymers Containing Pyrrole[3-c]Pyrrole-1,4-Diketone as the Acceptor Units and the Aromatics Donor Units with Different Planar Structures.

Three soluble conjugated polymers, named BEDPP, FLDPP, and CADPP, were prepared through the Suzuki polymerized reaction, and employed benzene (BE), fluorene (FL), and carbazole (CA) as the donor units, respectively. The electron-deficient molecule 2,5-bis-(2-octyldodecyl)-3,6-bis-(5-bromo-thiophene)-pyrrole[3-c]pyrrole-1,4-diketone(DPP)was introduced and used as the acceptor unit. The properties of these three copolymers were studied by a series of detailed characterization analysis, including X-ray photoelectron spectroscopy (XPS), colorimetry, electrochemical measurements, spectroelectrochemistry, kinetics, quantitative calculation, and thermogravimetric (TG) analysis, etc. The results revealed that BEDPP displayed a blue color in the neutral state and a light brown color in the oxidized state, FLDPP exhibited a cyan color in the neutral state and a gray color in the oxidized state, while CADPP displayed pure blue color in the neutral state and a light gray color in the oxidized state. All these polymers possess narrow optical band gaps lower than 1.80 eV and satisfactory thermal stability. The kinetic characterization showed that the optical contrasts (ΔT%) in the near-infrared region were superior to the visible region. The optical contrasts of BEDPP, FLDPP, and CADPP are 41.32%, 42.39%, and 45.95% in the near-infrared region, respectively, which made them a good application prospect in the near-infrared region. Amid the three polymers, CADPP has the highest coloration efficiency (around about 288 cm2·C-1) and fast switching times (0.77 s in the coloring process and 0.52 s in the bleaching process) in the visible region, and the comprehensive performance of CADPP can be comparable to that of the reported D-A (Donor-Acceptor) type blue color polymers. In general, based on the good performances and the stable neutral blue color, the three polymers had profound theoretical significance for the development of electrochromic material and the completion of the RGB (Red, Green, Blue) color space.

Various Structural Types of Cyanide-Bridged FeIII-MnIII Bimetallic Coordination Polymers (CPs) and Polynuclear Clusters Based-on A New mer-Tricyanoiron(III)Building Block: Synthesis, Crystal Structures, and Magnetic Properties.

Four cyanide-bridged FeIII-MnIII complexes {[Fe(qxcq)(CN)3][Mn(L1)(H2O)]}[Mn(L1)(H2O)(CH3OH)](ClO4)·1.5MeOH·0.5H2O (L1 = N,N'-bis(3-methoxy-5-bromosalicylideneiminate) (2), {[Fe(qxcq)(CN)3][Mn(L2)]}2·0.5H2O (L2 = N,N'-ethylene-bis(3-ethoxysalicylideneiminate)) (3), [Fe(qxcq)(CN)3][Mn(L3)] (L3 = bis(acetylacetonato)ethylenediimine) (4), [Fe(qxcq)(CN)3][Mn(L4)]·1.5MeOH·0.5CH3CN·0.25H2O (L4 = N,N'-(1,1,2,2-tetramethylethylene)bis(salicylideneiminate)) (5), were prepared by assembling a new structurally characterized mer-tricyanoiron(III) molecular precursor (Ph4P)[Fe(qxcq)(CN)3]·0.5H2O (qxcq- = 8-(2-quinoxaline-2-carboxamido)quinoline anion) (1) and the corresponding manganese(III) Schiff base compound. Complexes 2and 3containa cyanide-bridged heterobimetallic dinuclear entity, which can be further dimerized by self-complementary H-bond interactions through the coordinated water molecule from one complex and the free O4unit from the adjacent complex. Complexes 4 and 5 area one-dimensional coordination polymer (CP) comprised of the repeated [Mn(Schiffbase)-Fe(qxcq)(CN)3] units. Complex 4 shows a linear-chain conformation with two trans-located cyano groups bridgingthe neighboring Mn units, while complex 5 is a zigzag-like 1D CP, where the two cyano groups in cis configurationfunction as bridges. In bothcomplexes 4 and 5, the inter-chain π-πstack interactions within the aromaticrings of cyanide precursor extend the 1D chain into the supermolecular 2D networks. The magnetic property has been experimentally studied and theoretically fitted over the four Fe(III)-Mn(III) complexes, revealing the antiferromagnetic interaction in complexes 2 and 4 and the unusual ferromagnetic coupling in complexes 3 and 5 between the Fe(III) ion and the Mn(III) ion bridged by the cyano group. Furthermore, the different magnetic coupling nature has been analyzed on the basis of the magneto-structure correlation of the mer-tricyanometallate-based Fe(III)-Mn(III) magnetic system.

Effects of Pyrazine Derivatives and Substituted Positions on the Photoelectric Properties and Electromemory Performance of D⁻A⁻D Series Compounds.

Pyrazine derivatives quinoxaline and pyridopyrazine were selected as the acceptors, and benzocarbazole was used as the donor to synthesize four different D⁻A⁻D compounds. The results showed that 2,3-bis(decyloxy)pyridine[3,4-b]pyrazine (DPP) exhibited stronger electron-withdrawing ability than that of 2,3-bis(decyloxy)quinoxaline (DPx), because DPP possesses one more nitrogen (N) atom, resulting in a red-shift of the intramolecular charge transfer (ICT) absorption bands and fluorescent emission spectra for compounds with DPP as the acceptor compared with those that use DPx as the acceptor. The band-gap energy (Eg) of the four D⁻A⁻D compounds were 2.82 eV, 2.70 eV, 2.48 eV, and 2.62 eV, respectively, for BPC-2DPx, BPC-3DPx, BPC-2DPP, and BPC-3DPP. The solvatochromic effect was insignificant when the four compounds were in the ground state, which became significant in an excited state. With increasing solvent polarity, a 30⁻43 nm red shift was observed in the emissive spectra of the compounds. The thermal decomposition temperatures of the four compounds between 436 and 453 °C had very high thermal stability. Resistor-type memory devices based on BPC-2DPx and BPC-2DPP were fabricated in a simple sandwich configuration, Al/BPC-2DPx/ITO or Al/BPC-2DPP/ITO. The two devices showed a binary non-volatile flash memory, with lower threshold voltages and better repeatability.

Donor-Acceptor-Type Copolymers Based on 3,4-Propylenedioxy-thiophene and 5,6-Difluorobenzotriazole: Synthesis and Electrochromic Properties.

Three solution-processable D-A-type conjugated polymers P1, P2 and P3 were successfully synthesized via the Pd-catalyzed Stille cross-coupling copolymerization approach, with 6,8-Dibromo-3,3-bis-decyl-3,4-dihydro-2H-thieno[3,4-b][1,4] dioxepine (M1) and 2,5-Bis(trimethylstannanyl)thiophene (M3) as the donor units and 4,7-Dibromo-5,6-difluoro-2-(2-hexyl-decyl)-2H-benzotriazole (M2) as the acceptor unit, wherein the feed ratio of the three units was 1:3:4 (M1:M2:M3, the same below), 1:1:2 and 3:1:4 for P1, P2, and P3, respectively. The results obtained by our test showed that the feed ratio between the D and A units had a significant effect on both the electrochemical and the spectroelectrochemical properties of the three polymers. The copolymers exhibited a gradually deepening red color in neutral state with the increase of M1 content and then turned to a transmissive grey color in the oxidation state. Also, three copolymers showed good performance in electrochromic parameters, which mainly consists of optical contrast, response time, and coloration efficiency. In general, the excellent electrochromic performances of the copolymers make them outstanding candidates for electrochromic material applications.

Soluble Electrochromic Polymers Incorporating Benzoselenadiazole and Electron Donor Units (Carbazole or Fluorene): Synthesis and Electronic-Optical Properties.

A series of π-conjugated polymers containing alternating benzoselenadiazole (BSe)-bi(thiophene derivative)-carbazole or benzoththiadiazole (BSe)-bi(thiophene derivative)-fluorene units were designed and synthesized. Thiophene derivatives, namely 3-hexylthiophene, 3,4-bihexyloxythiophene, and 3,4-bioctyloxythiophene, were used as the π-bridges of the polymers. The polymers were characterized in detail in terms of their thermal stabilities, cyclic voltammograms, UV-Vis absorption, spectroelectrochemistry, dynamic switching property and so forth. The alkoxy thiophene π-bridged polymers have lower onset oxidation potentials and bandgaps than that of their corresponding alkyl thiophene π-bridged polymers. The selection of the donor units between the carbazole and the fluorene units has nearly no effect on the bandgaps and colors as well as the onset oxidation potentials of the polymers. The increase in the length of the side alkyl chains on the thiophene ring caused a slight increase in the polymer bandgap, which may be caused by the space hindrance effect. The dynamic switching abilities of the polymers were obtained by the chronoabsorptometry method, and the results also suggested that the alkoxy thiophene-containing polymers (as π-bridges) have higher contrast ratios than the corresponding alkyl thiophene-containing polymers. Furthermore, the increase in the length of the side alkyl chain might have a detrimental effect on the optical contrast ratios of the polymers.

Synthesis and characterization of novel donor-acceptor type neutral green electrochromic polymers containing an indolo[3,2-b]carbazole donor and diketopyrrolopyrrole acceptor.

Indolocarbazole bearing donor-acceptor type polymers have rarely been reported in the electrochromic field despite them having considerable development in the applications of organic photoelectric devices. In this paper, two novel soluble electrochromic polymers, namely PDTCZ-1 and PDTCZ-2, were prepared by chemical polymerization including indolo[3,2-b]carbazole (IC) units as the donor, diketopyrrolopyrrole (DPP) units as the acceptor and bithiophene units as the bridging group. Through diverse characterization techniques such as cyclic voltammetry (CV), scanning electron microscopy (SEM), UV-vis spectroscopy and thermogravimetric analysis (TGA), it was found that PDTCZ-1 and PDTCZ-2 exhibited saturated green in the neutral state and pale green in the oxidized state with optical band gaps of 1.44 eV and 1.39 eV, respectively, as well as demonstrating fast switching speed, satisfactory coloration efficiency and favorable thermal stability. In addition, the proportion of donors to acceptors definitely exerted an influence on the electrochromic properties of the polymers. As the thiophene/IC/DPP ratio changed from 4/3/1 (PDTCZ-1) to 5/4/1 (PDTCZ-2), meaning an increase of the donor ratio, the polymer showed a reduced onset oxidation potential, decreased optical band gap and different dynamic parameters. The positive results suggest that PDTCZ-1 and PDTCZ-2 could be promising candidates as neutral green electrochromic materials and deserve more attention and penetrating research.

Three 1D cyanide-bridged M(Ni, Pd, Pt)-Mn(II) Coordination Polymer: Synthesis, Crystal Structure and Magnetic Properties.

Three tetracyanide-containing building blocks K2[M(CN)4] (M = Ni, Pd, Pt) and one semi-closed macrocycle seven-coordinated manganese(II) compound have been employed to assemble cyanide-bridged heterometallic complexes, resulting in three cyanide-bridged MII-MnII complexes: [Mn(L)][Ni(CN)4] · 2H2O (1) [Mn(L)][Pd(CN)4] (2) and [Mn(L)][Pt(CN)4] (3) (L = 2,6-bis[1-(2-(N-methylamino)ethylimino)ethyl]pyridine). Single-crystal X-ray diffraction analysis shows their similar one-dimensional structure consisting of the alternating [Mn(L)]2+ species and [M(CN)4]2- building blocks, generating a cyanide-bridged neutral polymeric chain. In all three isostructural complexes the coordination geometry of manganese ion is a slightly distorted pentagonal-bipyramidal with the two cyanide nitrogen atoms at the trans positions and N5 coordinating mode at the equatorial plane from ligand L. Investigation over magnetic properties of these complexes reveals very weak antiferromagnetic interaction between neighboring Mn(II) ions bridged by the long NC-M-CN unit. A best-fit to the magnetic susceptibility of complexes 1-3 leads to the magnetic coupling constant of J = -0.081, -0.103 and -0.14 cm-1, respectively.

Costs, Trends, and Related Factors in Treating Lung Cancer Patients in 67 Hospitals in Guangxi, China.

Lung cancer is a common disease with high mortality in China. Recent economic advances have led to improved medical capabilities, while costs associated with treating this disease have increased. Such change contributes to a commonly held belief that healthcare costs are out of control. However, few studies have examined this issue. Here, we use 34,678 hospitalization summary reports from 67 Guangxi hospitals (period 2013-2016) to document costs, temporal trends, and associated factors. Findings from this study are surprising in that they debunk the myth of uncontrolled healthcare costs. In addition, results and experiences from Guangxi are informative for other comparable regions.

Assessment of potential factors associating with costs of hospitalizing cardiovascular diseases in 141 hospitals in Guangxi, China.

BACKGROUND: The rising cost of healthcare is of great concern in China, as evidenced by the media features negative reports almost daily. However there are only a few studies from well-developed cities, like Beijing or Shanghai, and little is known about healthcare costs in rest of the country. In this study, we use hospitalization summary reports (HSRs) from admitted cardiovascular diseases patients in Guangxi hospitals during 2013-2016, and we investigate temporal trends of healthcare costs and associated factors. METHODS: By generalized additive model, we compute temporal trends of cost per stay (CPS), cost per day (CPD) and others. We then use generalized linear models to assess which factors associate with CPS and CPD. FINDINGS: Using a total of 760,000 HSRs, we find that CPS appears to be stabilized around $1040 until the middle of year 2015, before exhibiting a downward trend. Similarly, CPD exhibits similar stable pattern. Meanwhile, surgery-specific CPS showed an increase in year 2013-2014, and then stabilized. Drug costs account for over 1/3 of CPS, but they are gradually declining. Costs associated with physicians' and nurses' services represent less than 5% of CPS. We found that age, sex, marital status, occupation and payment methods are significantly associated with CPS or CPD. Interestingly, we found no association between patient ethnicity and these costs. However, we did find that minority patients use more secondary hospitals than Han patients. INTERPRETATIONS: Healthcare costs in Guangxi are stable, contrary to the rise portrayed by Chinese mass media. Several factors can be associated with healthcare costs, and these may be useful for developing evidence-based policies. In particular, there is a need to encourage more Han patients to seek care in primary and secondary hospitals.

The Availability of Neutral Cyan, Green, Blue and Purple Colors from Simple D⁻A Type Polymers with Commercially Available Thiophene Derivatives as the Donor Units.

In this paper, the Stille coupling reaction was used to prepare four donor⁻acceptor⁻donor (D⁻A⁻D) type monomers. For this purpose, 2,3-bis(4-methoxyphenyl) quinoxaline was used as the acceptor unit, and thiophene derivatives (3,4-ethylenedioxythiophene, or EDOT; 3-methoxythiophene, or MOTh; 3-methylthiophene, or MTh; and thiophene, or Th) were used as the donor units. The monomers were polymerized to the corresponding polymers by the cyclic voltammetry (CV) or potentiostatic method. The band gaps and the adsorption profiles of the polymers were finely tuned with the incorporation of the different thiophene units. All four polymers have low band gaps, and switched between the colored neutral states and the highly transmissive oxidized state. We were successfully able to obtain the valuable neutral colors of cyan, green, blue, and violet for the polymers employing EDOT, MOTh, MTh, and Th as the donor unit, respectively. Furthermore, electrochromic kinetic investigations showed that all four polymers displayed excellent optical contrasts (ΔT%), fast switching times, high coloration efficiencies, and robust stabilities, indicating that these four polymers are probably promising choices for developing electrochromic devices.

Effects of Fluoro Substitution on the Electrochromic Performance of Alternating Benzotriazole and Benzothiadiazole-Based Donor⁻Acceptor Type Copolymers.

Two new donor⁻acceptor type electrochromic copolymers containing non-fluorinated and di-fluorinated benzothiadiazole analogues, namely P(TBT-TBTh) and P(TBT-F-TBTh), were synthesized successfully through chemical polymerization. Both polymers were measured by cyclic voltammetry, UV-vis spectroscopy, colorimetry and thermogravimetric analysis to study the influence of fluoro substitution on the electrochromic performance. The results demonstrated that the two polymer films displayed well-defined redox peaks in pairs during the p-type doping, and showed distinct color change from dark gray blue to light green for P(TBT-TBTh) with the band gap of 1.51 eV, and from gray blue to celandine green for P(TBT-F-TBTh) with the band gap of 1.58 eV. P(TBT-F-TBTh) presented lower highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels, and better stability than P(TBT-TBTh). It was found that the two fluorine atoms participated in not only inductive effects but also mesomeric effects in the P(TBT-F-TBTh) backbone. In addition, the polymers exhibited high optical contrasts, short response time, and favorable coloration efficiency, especially in the near infrared region. The characterization results indicated that the two reported polymers can be the potential choice as electrochromic materials.

Multichromic Polymers Containing Alternating Bi(3-Methoxythiophene) and Triphenylamine Based Units with Para-Protective Substituents.

Two novel triphenylamine-based thiophene derivative monomers, 4-cyano-4',4″-di(4-methoxythiophen-2-yl)triphenylamine and 4-methoxy-4',4″-di(4-methoxythiophen-2-yl)triphenylamine, were successfully synthesized. The corresponding polymers including poly (4-cyano-4',4″-di(4-methoxythiophen-2-yl)triphenylamine) and poly (4-methoxy-4',4″-di(4-methoxythiophen-2-yl)triphenylamine) were electrochemically synthesized and characterized by multiple test method. The electrochemical measurements and spectroelectrochemical analyses revealed that both of the two polymers had quasi-reversible redox behavior and multi-electrochromic properties. The two polymer films showed reversible electrochemical oxidation, excellent optical contrasts in NIR region (62% at 1070 nm for the first polymer, and 86% at 1255 nm for the second polymer), satisfactory coloration efficiencies and fast switching times. The research on the application of the as prepared polymer in the fabrication of electrochromic device was also conducted, employing PCMTPA or PMMTPA as the anodically coloring materials.

Two binuclear cyanide-bridged Cr(III)-Mn(III) complexes based-on [Cr(2,2'-bipy)(CN)4]- building block: synthesis, crystal structures and magnetic properties.

Tetracyanide building block [Cr(2,2'-bipy)(CN)(4)]- and two bicompartimental Schiff-base based manganese(III) compounds have been employed to assemble cyanide-bridged heterometallic complexes, resulting in two cyanide-bridged CrIII-MnIII complexes: [Mn(L(1))(H(2)O)][Cr(2,2'-bipy)(CN)(4)]·CH(3)OH·2.5H(2)O (1) and [Mn(L(2))(H(2)O)][Cr(2,2'-bipy)(CN)(4)]·CH(3)OH·(3)H(2)O (2) (L1 = N,N'-(1,3-propylene)-bis(3-methoxysalicylideneiminate), L2 = N,N'-ethylene-bis(3-ethoxysalicylideneiminate)). Single X-ray diffraction analysis shows their similar cyanide-bridged binuclear structures, in which the cyanide precursor acting as monodentate ligand connects the manganese(III) ion. The binuclear complexes are self-complementary through coordinated aqua ligand and the free O4 compartment from the neighboring complex, giving H-bond linking dimer structure. Investigation over magnetic properties reveals the antiferromagnetic magnetic coupling between the cyanide-bridged Cr(III) and Mn(III) ions. A best-fit to the magnetic susceptibilities of these two complexes leads to the magnetic coupling constants J = -5.95 cm(-1), j = -0.61 cm(-1) (1) and J = -4.15 cm(-1), j = -0.57 cm(-1) (2), respectively.

A novel 9-MC-3 and 15-MC-6 onset stacked metallacrown single-molecule magnet: synthesis and crystal structure.

A novel enneanuclear manganese complex, [Mn(9)O(4)(Mesao)(6)(MeO)(3)(O(2)CMe)(3)(OH)(MeOH)(2)]·2.5DMF [1; Me-saoH(2) = 2-hydroxyphenylethanone oxime], was synthesized. The structure of 1 contains an unusual [Mn(9)O(4)] core with an unprecedented defective "supertetrahedron" topology based on two parallel, onset stacked 9-MC-3 and 15-MC-6 metallacrown subunits. Magnetic studies indicate that 1 behaves as a single-molecule magnet.