Two swords combination: Smartphone-assisted ratiometric fluorescent and paper sensors for dual-mode detection of glyphosate in edible malt.

The long-term and excessive use of glyphosate (GLY) in diverse matrices has caused serious hazard to the human and environment. However, the ultrasensitive detection of GLY still remains challenging. In this study, the smartphone-assisted dual-signal mode ratiometric fluorescent and paper sensors based on the red-emissive gold nanoclusters (R-AuNCs) and blue-emissive carbon dots (B-CDs) were ingeniously designed accurate and sensitive detection of GLY. Upon the presence of GLY, it would quench the fluorescence of B-CDs through dynamic quenching effect, and strengthen the fluorescence response of R-AuNCs due to aggregation-induced enhancement effect. Through calculating the GLY-induced fluorescence intensity ratio of B-CDs to R-AuNCs by using a fluorescence spectrophotometer, low to 0.218 µg/mL of GLY could be detected in lab in a wide concentration range of 0.3-12 µg/mL with high recovery of 94.7-103.1% in the spiked malt samples. The smartphone-assisted ratiometric fluorescent sensor achieved in the 96-well plate could monitor 0-11 µg/mL of GLY with satisfactory recovery of 94.1-107.0% in real edible malt matrices for high-throughput analysis. In addition, a portable smartphone-assisted ratiometric paper sensor established through directly depositing the combined B-CDs/R-AuNCs probes on the test strip could realize on-site measurement of 2-8 µg/mL of GLY with good linear relationship. This study provides new insights into developing the dual-signal ratiometric sensing platforms for the in-lab sensitive detection, high-throughput analysis, and on-site portable measurement of more trace contaminants in foods, clinical and environmental samples.

Establishment of a Dual-Signal Enhanced Fluorescent Aptasensor for Highly Sensitive Detection of Ochratoxin A.

A robust and versatile dual-signal enhanced fluorescent aptasensor was developed for ochratoxin A (OTA) detection based on fluorescence resonance energy transfer between 5-carboxyfluorescein (FAM) and Super Green I (SG) fluorophores as the donor and graphene oxide (GO) nanosheet as the acceptor. Abundant SG probes were adsorbed into the FAM-complementary DNA (cDNA)-aptamer double-stranded structure to achieve remarkably enhanced fluorescence responses. Without OTA, the FAM-cDNA-SG conjugates coexisted with GO nanosheets, exhibiting strong fluorescence signals. In the presence of OTA, it was captured by the aptamers to release cDNA-FAM and SG probes, which were adsorbed by GO, leading to OTA-dependent fluorescence quenching. The changed fluorescence intensity was measured for accurate quantitation of OTA. Under optimum conditions, the dual-signal enhanced fluorescent aptasensor realized fascinating sensitivity with a limit of detection of 0.005 ng/mL and a wide concentration range of 0.02-20 ng/mL, as well as high selectivity for OTA over other interfering substances, excellent accuracy with average recoveries of 91.37-116.83% in the fortified malt matrices, and superior reliability and practicability in actual samples. This FAM-cDNA-aptamer-SG/GO nanosheet-based aptasensing platform could be extended to monitor other contaminants or trace molecules in food, environmental, and diagnostic fields by altering the corresponding aptamers.

High-throughput extraction and automatic purification of alternariol from edible and medicinal herbs based on aptamer-functionalized magnetic nanoparticles.

Mycotoxin contamination is widespread in plants and herbs, posing serious threats to the consumer and human health. Of them, alternariol (AOH) has attracted great attention as an "emerging" mycotoxin in medicinal herbs. However, a specific and high-throughput extraction method for AOH is currently lacking. Thus, developing an efficient pre-treatment technique for AOH detection is extremely vital. Here, a novel automated magnetic solid-phase extraction method was proposed for the highly efficient extraction of AOH. Combining the aptamer-functionalized magnetic nanoparticles (AMNPs) and the automatic purification instrument, AOH could be extracted in medicinal herbs in high throughput (20 samples) and a short time (30 min). The main parameters affecting extraction were optimized, and the method was finally carried out by incubation AMNPs with 3 mL of sample solution for 10 min, and then desorption in 75% methanol for liquid-phase detection. Under optimal conditions, good reproducibility, stability, and selectivity were realized with an adsorption capacity of 550.84 ng/mg. AOH extraction in three edible herbs showed good resistance to matrix interference with recovery rates from 86% to 111%. In combination with AMNPs and the automatic purification instrument, high-throughput and labor-free extraction of AOH in different complex matrices was achieved, which could be extended in other complex matrices.

Nafion-Immobilized Functionalized MWCNT-based Electrochemical Immunosensor for Aflatoxin B1 Detection.

The ubiquitous aflatoxin B1 (AFB1) contamination in foods and other complex matrices has brought great challenges for onsite monitoring. In this study, an ultrasensitive Nafion-immobilized functionalized multiwalled carbon nanotube (MWCNT)-based electrochemical (EC) immunosensor was developed for trace AFB1 detection. The introduced Nafion film could steadily stabilize functionalized MWCNTs with uniform distribution and tiling on the surface of a Au electrode. Functionalized MWCNTs with a large specific surface area, numerous active sites to couple with abundant anti-AFB1 monoclonal antibodies (mAbs), and high conductivity served as the signal amplifier for remarkably enhancing the sensing performance of the immunosensor. In the presence of AFB1, it was specifically captured by mAbs to reduce the amplified current signals, which were recorded by differential pulse voltammetry for the accurate quantitation of AFB1. Because of the synergistic effects of Nafion on the stabilization of functionalized MWCNTs as signal enhancers, the developed EC immunosensor exhibited an extremely high selectivity, excellent sensitivity with a limit of detection as low as 0.021 ng/mL, and a wide dynamic range of 0.05-100 ng/mL, besides fascinating merits of easy construction, low cost, good stability in 7 days, and good reusability. The anti-interference ability of the immunosensor was verified against three other mycotoxins, and the practicability and accuracy were confirmed by measuring AFB1 in fortified malt, lotus seed, and hirudo samples with a satisfactory recovery of 92.08-104.62%. This novel immunosensing platform could be extended to detect more mycotoxins in complex matrices to ensure food safety.

Anterior Percutaneous Full-Endoscopic Transcorporeal with Single-Incision Treatment for Noncontiguous 2-Level Cervical Disc Herniation: Technical Report and Early Follow-Up.

BACKGROUND: Noncontiguous 2-level cervical disc herniation (NCT-CDH) is a common condition that often requires surgical intervention. In this study, we developed a surgical approach for the treatment of NCT-CDH using anterior percutaneous full-endoscopic single incision through the vertebral body. We provide a brief overview of its safety, efficacy, and feasibility, along with a description of our relevant surgical experience. METHODS: A retrospective study was conducted, involving 30 patients who were followed up for at least 12 months. Preoperative and postoperative visual analog scale, Japanese Orthopedic Association scores, Nurick scores, intervertebral disc height, and modified Macnab criteria were recorded. Patients underwent regular radiological evaluations throughout the follow-up period. RESULTS: Postoperative computed tomography, magnetic resonance imaging, and X-ray examinations revealed bone tunnel healing, intact drilled vertebral bodies without collapse, adequate decompression of the spinal canal, and normal cervical mobility. There was a significant improvement in postoperative visual analog scale, Japanese Orthopedic Association scores, Nurick scores, and modified Macnab criteria compared to the preoperative values (P < 0.05). CONCLUSIONS: Our study revealed that the anterior percutaneous full-endoscopic transcorporeal with single-incision treatment for NCT-CDH is a safe and feasible surgical method. Therefore, it can be considered as a viable treatment option for patients with NCT-CDH.

Anterior transcorporeal approach combined with posterior translaminar approach in percutaneous endoscopic cervical discectomy for two-segment cervical disc herniation treatment: a technical report and early follow-up.

OBJECTIVE: Full endoscopic techniques are being gradually introduced from single-segment cervical disc herniation surgery to two-segment cervical disc herniation surgery. However, there is no suitable full endoscopic treatment for mixed-type two-segment cervical disc herniation (MTCDH) in which one segment herniates in front of the spinal cord and the other segment herniates behind the spinal cord. Therefore, we introduce a new full endoscopic technique by combining an anterior transcorporeal approach and a posterior translaminar approach. In addition, we provide a brief description of its safety, efficacy, feasibility, and surgical points. METHODS: Thirty patients with MTCDH were given full endoscopic surgical treatment by a combined transcorporeal and transforaminal approach and were followed up for at least 12 months. RESULTS: Clinical assessment scales showed that the patient's symptoms and pain were significantly reduced postoperatively. Imaging results showed bony repair of the surgically induced bone defect and the cervical Cobb angle was increased. No serious complications occurred. CONCLUSION: This technique enables minimally invasive surgery to relieve the compression of the spinal cord by MTCDH. It avoids the fusion of the vertebral body for internal fixation, preserves the vertebral motion segments, avoids medical destruction of the cervical disc to the greatest extent possible, and expands the scope of adaptation of full endoscopic technology in cervical surgery.

Anterior Full-endoscopic Single-port Double Transcorporeal Spinal Cord Decompression for Noncontinuous Two-segment Cervical Spondylotic Myelopathy: A Technical Note.

OBJECTIVE: In clinical practice, noncontinuous two-segment spinal cord cervical spondylosis is a particular form of cervical degenerative disease. Traditional anterior open surgery frequently comes with severe trauma, risks, and debatable treatment options. This study aimed to describe for the first time a novel minimally invasive technique, namely, anterior full-endoscopic single-port double transcorporeal spinal cord decompression for the treatment of patients with noncontinuous two-segment cervical spondylotic myelopathy. METHOD: From February 2020 to May 2021, five patients with noncontinuous two-segment cervical spondylotic myelopathy were treated with anterior full-endoscopic single-port double transcorporeal spinal cord decompression. Two bone channels were established by the trephine through the vertebral body oblique upward and downward to the herniated disc osteophyte complex, and the full-endoscopic system could decompress the spinal cord through the channels. All cases were followed up for over 2 years. The modified Japanese Orthopaedic Association (mJOA) score and visual analogue scale (VAS) score before and after operation and during follow-up were used to evaluate the clinical effectiveness. Radiological examinations, including CT and MRI, were utilized to evaluate the efficacy of spinal cord decompression and bone channel repair. RESULTS: All operations were successfully completed and the average operation time was 185 min, with no operation-related complications. Compared with the preoperative evaluation, the mJOA score and VAS score were improved at each time point after operation and follow-up. Postoperative CT and MRI scans showed that the intervertebral disc-osteophyte complex was removed through the vertebral bone passage, and the spinal cord was fully decompressed. After 24 months of follow-up, CT and MRI scans showed that the bone channel was almost repaired and healed. CONCLUSION: Anterior full-endoscopic single-port double transcorporeal spinal cord decompression is an effective minimally invasive technique for noncontinuous two-segment cervical spondylosis. It provides precise and satisfactory spinal cord decompression under endoscopic visualization with minimum trauma.

UiOL@AIEgens-assisted lateral flow immunosensor for the ultrasensitive dual-modal point-of-care detection of aflatoxin B1.

Aflatoxin B1 (AFB1) contamination in food has attracted worldwide attention. The sensitive detection of AFB1 is vital for ensuring food quality and safety. This study developed an ultrasensitive signal-enhanced lateral flow immunosensor (LFIS) based on the functionalized zirconium metal-organic framework (MOF) of a UiO linker enriched with abundant aggregation-induced emission luminogen (UiOL@AIEgens) probes for the rapid dual-modal point-of-care (POC) determination of AFB1. Using UiO MOFs with numerous active sites as the carrier facilitated abundant AIEgens enrichment on the surface. After coupling with enough anti-AFB1 monoclonal antibodies (mAbs), the green-emissive UiOL@AIEgens-mAbs probes with high specificity and remarkably-enhanced fluorescence responses were obtained to competitively capture target AFB1 in the standard or sample solution and AFB1 antigen immobilized on the test (T) line of the POC LFIS. Under optimum conditions, the LFIS was capable of visual qualitative and smartphone-assisted dual-modal determination of target AFB1 within 7 min. Detection occurred in a range of 0.01-5 ng/mL at an ultra-low detection limit of 0.003 ng/mL, which was 300- and 600-fold lower than traditional immunoassays and the maximum limit set by the European Union, respectively. Moreover, the feasibility and robustness of the LFIS platform were assessed by detecting AFB1 in maize and lotus seed samples with average recoveries of 94.3-109.0%. The developed UiOL@AIEgens-based POC LFIS can be used for ultrasensitive, reliable, on-site detection in food. This study provides a new method for the real-time monitoring of AFB1 and other harmful contaminants in food and more complex matrices.

Surgical Essentials and 2-Year Follow-Up Results of Channel Repair in Endoscopic Transcorporeal Discectomy for Cervical Disc Herniation.

OBJECTIVE: To evaluate long-term outcomes and surgical essentials of channel repair in endoscopic transcorporeal discectomy for cervical disc herniation. METHODS: From October 2019 to March 2020, 24 patients with cervical disc herniation underwent channel repair after percutaneous full-endoscopic anterior transcorporeal cervical discectomy. Five interventions were performed at C3-C4, 11 were performed at C4-C5, and 8 were performed at C5-C6. Clinical outcomes were evaluated by Neck Disability Index, Japanese Orthopaedic Association, and visual analog scale scores. Radiologic changes were evaluated with intervertebral disc height and drilled vertebral height. RESULTS: All procedures were completed with a mean operating time of 86.40 ± 8.19 minutes. Swollen neck was observed in 5 patients, which resolved within 2 hours. At the final follow-up, Neck Disability Index, Japanese Orthopaedic Association, and visual analog scale scores were improved significantly compared with preoperative assessments (P < 0.05); intervertebral disc height was decreased significantly (P < 0.05); and loss of drilled vertebral height was not significant (P > 0.05). All 24 bony channels disappeared by 3 months postoperatively. No other complications were observed. CONCLUSIONS: Percutaneous full-endoscopic anterior transcorporeal cervical discectomy with channel repair offers a minimally invasive and effective treatment option for patients with cervical disc herniation. This technique demonstrates favorable clinical outcomes, including preservation of cervical spine mobility and minimal complications. Although there was a significant loss of intervertebral disc height, no vertebral collapse occurred. Strict adherence to surgical indications and precautions is crucial for successful outcomes. Further research and long-term studies are required to validate the efficacy and safety of this approach in a larger patient population.

3D nanocake-like Au-MXene/Au pallet structure-based label-free electrochemical aptasensor for paraquat determination.

3D nanocake-like Au-MXene and Au pallet (Au-MXene/AuP) nanocomposite-modified screen-printed carbon electrodes (SPCEs) were utilized to construct an ultrasensitive label-free electrochemical aptasensor through a self-assembly procedure for trace paraquat (PQ) residue detection. Benefiting from the excellent electrochemical (EC) performances (e.g., high conductivity and large surface area) of Au-MXene nanocomposites and AuP substrate, the developed Apt/Au-MXene/AuP/SPCE-based EC aptasensor displayed excellent specificity and anti-interference ability, good repeatability, and stability. A linear relationship between the log value of the change in current intensity [lg (ΔI)] and the log value of the concentration of PQ [lg (CPQ)] was obtained in the range 0.05-1000 ng/mL. The limit of detection was 0.028 ng/mL, and the sensitivity was 255.5 µA/(µM·cm2). Practical applications in malt and mint samples confirmed the accuracy of the EC aptasensor in complex matrices for PQ detection, providing a universal analytical tool for other trace pesticides in different food samples by simply replacing the corresponding aptamers.

Anterior percutaneous full-endoscopic transcorporeal decompression of the spinal cord via one vertebra with two bony channels for adjacent two-segment cervical spondylotic myelopathy: a technical note.

BACKGROUND: The current treatments for adjacent two-segment cervical spondylotic myelopathy (CSM) include two-segment anterior cervical discectomy and fusion (ACDF) and single-segment anterior cervical corpectomy and fusion (ACCF). Long-term follow-up has demonstrated that both procedures have complications such as reduced cervical mobility, accelerated degeneration of adjacent segments and loosening of internal fixation screws. The purpose of this study is to demonstrate the feasibility, safety, and efficacy of anterior percutaneous full-endoscopic transcorporeal decompression of the spinal cord (APFETDSC) via one vertebra with two bony channels for the treatment of adjacent two-segment CSM and to present our surgical experience. METHODS: Anterior percutaneous full-endoscopic transcorporeal decompression of the spinal cord (APFETDSC) via one vertebra with two bony channels was performed for 12 patients with adjacent two-segment CSM with follow-up care for at least 12 months. The Visual analog scale (VAS) and the Japanese Orthopedic Association Score (JOA) were recorded, and modified Macnab criteria were used to evaluate the treatment excellence rate. Radiological examinations, including X-ray, computed tomography (CT) and magnetic resonance imaging (MRI), were used to evaluate spinal cord decompression, intervertebral stability and healing of the bony channel. RESULTS: All 12 patients completed the operation successfully. No postoperative complications, such as dysphagia, Horner's syndrome, or laryngeal recurrent nerve palsy, were found. The postoperative VAS and JOA scores were significantly improved compared with those before surgery(P < 0.001). According to the modified Macnab criteria, the clinical outcome was excellent in 8 cases, good in 3 cases and fine in 1 case at the final follow-up and the excellent and good rate was 91.7%. Postoperative and follow-up imaging showed significant spinal cord decompression, well-healed bony channels and no cervical instability. CONCLUSIONS: This study is the first report of anterior percutaneous full-endoscopic transcorporeal decompression of the spinal cord via one vertebra with two bony channels. This procedure has the advantages of less trauma, faster recovery, fewer complications and no need to implant internal fixators. This is a minimally invasive, feasible and safe surgical procedure for patients with adjacent two-segment CSM.

Colorimetric immunosensing using liposome encapsulated MnO2 nanozymes for SARS-CoV-2 antigen detection.

Development of specific signal reporters with signal amplification effect are highly needed for sensitive and accurate detection of pathogen. Herein, we design a colorimetric immunosensing nanosystem based on liposome encapsulated quantum dots-sized MnO2 nanozyme (MnO2QDs@Lip) as a signal reporter for ultrasensitive and fast detection of SARS-CoV-2 antigen. The pathogenic antigens captured and separated by antibody-conjugated magnetic beads (MBs) are further connected with antibody-modified MnO2QDs@Lip to form a sandwich-like immunocomplex structure. After triggered release, MnO2 QDs efficiently catalyze colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB, which can be qualitatively observed by naked eyes and quantitatively analyzed by UV-Vis spectra or smartphone platforms. By taking advantages of immuno-magnetic separation, excellent peroxidase-like catalytic activity of MnO2 QDs, and high encapsulation efficiency of MnO2QDs@Lip, ultrasensitive detection of SARS-CoV-2 antigen ranging from 0.1 pg/mL to 100 ng/mL is achieved within 20 min. The limit of detection (LOD) is calculated to be 65 fg/mL in PBS buffer. Furthermore, real clinical samples of SARS-CoV-2 antigens can be effectively identified by this immunosensing nanosystem with excellent accuracy. This proposed detection nanosystem provides a strategy for simple, rapid and ultrasensitive detection of pathogens and may shed light on the development of new POCT detection platforms for early diagnosis of pathogens and surveillance in public health.

Validation of the shotgun metabarcoding approach for comprehensively identifying herbal products containing plant, fungal, and animal ingredients.

Identifying plant, fungal, and animal ingredients in a specific mixture remains challenging during the limitation of PCR amplification and low specificity of traditional methods. Genomic DNA was extracted from mock and pharmaceutical samples. Four type of DNA barcodes were generated from shotgun sequencing dataset with the help of a local bioinformatic pipeline. Taxa of each barcode was assigned by blast to TCM-BOL, BOLD, and GenBank. Traditional methods including microscopy, thin layer chromatography (TLC), and high-performance liquid chromatography (HPLC) were carried out according to Chinese pharmacopoeia. On average, 6.8 Gb shotgun reads were sequenced from genomic DNA of each sample. Then, 97, 11, 10, 14, and one operational taxonomic unit (OTU) were generated for ITS2, psbA-trnH, rbcL, matK, and COI, respectively. All the labeled ingredients including eight plant, one fungal, and one animal species were successfully detected in both the mock and pharmaceutical samples, in which Chebulae Fructus, Poria, and Fritilariae Thunbergia Bulbus were identified via mapping reads to organelle genomes. In addition, four unlabeled plant species were detected from pharmaceutical samples, while 30 genera of fungi, such as Schwanniomyces, Diaporthe, Fusarium were detected from mock and pharmaceutical samples. Furthermore, the microscopic, TLC, and HPLC analysis were all in accordance with the standards stipulated by Chinese Pharmacopoeia. This study indicated that shotgun metabarcoding could simultaneously identified plant, fungal, and animal ingredients in herbal products, which has the ability to serve as a valuable complement to traditional methods.

Division of developmental phases of freshwater leech Whitmania pigra and key genes related to neurogenesis revealed by whole genome and transcriptome analysis.

The freshwater leech Whitmania pigra (W. pigra) Whitman (Annelida phylum) is a model organism for neurodevelopmental studies. However, molecular biology research on its embryonic development is still scarce. Here, we described a series of developmental stages of the W. pigra embryos and defined five broad stages of embryogenesis: cleavage stages, blastocyst stage, gastrula stage, organogenesis and refinement, juvenile. We obtained a total of 239.64 Gb transcriptome data of eight representative developmental phases of embryos (from blastocyst stage to maturity), which was then assembled into 21,482 unigenes according to our reference genome sequenced by single-molecule real-time (SMRT) long-read sequencing. We found 3114 genes differentially expressed during the eight phases with phase-specific expression pattern. Using a comprehensive transcriptome dataset, we demonstrated that 57, 49 and 77 DEGs were respectively related to morphogenesis, signal pathways and neurogenesis. 49 DEGs related to signal pathways included 30 wnt genes, 14 notch genes, and 5 hedgehog genes. In particular, we found a cluster consisting of 7 genes related to signal pathways as well as synapses, which were essential for regulating embryonic development. Eight genes cooperatively participated in regulating neurogenesis. Our results reveal the whole picture of W. pigra development mechanism from the perspective of transcriptome and provide new clues for organogenesis and neurodevelopmental studies of Annelida species.

Electrostatic Self-Assembly of MXene on Ruthenium Dioxide-Modified Carbon Cloth for Electrochemical Detection of Kaempferol.

A superior composite material consisting of MXene and ruthenium dioxide-modified carbon cloth is synthesized by pulsed laser deposition and electrostatic self-assembly, which is further utilized to construct a class of novel electrochemical (EC) sensors for kaempferol (KA) detection. The carbon-cloth-based electrodes modified by ruthenium dioxide and then MXene are characterized by X-ray diffraction, scanning electron microscope, and X-ray photoemission spectroscopy. The EC process on the modified electrodes is analyzed by cyclic voltammetry, EC impedance spectroscopy, and differential pulse voltammetry. It is found that positively charged RuO2 not only possesses the remarkable electrical conductivity and electrocatalysis activity but also hampers the restacking of MXene, which accordingly enhances the exposure of the active surface area and greatly boosts the electrocatalysis activity of the entire composite. Consequently, this newly developed composite-based EC sensor exhibits a high sensitivity, selectivity, and remarkable stability to detect KA with two linear ranges of 0.06-1 and 1-15 µM. The inferred limit of detection is 0.039 µM via differential pulse voltammetry. More importantly, this novel EC sensor is found to be applicable for detecting KA in practical traditional Chinese medicines.

Recent progress in aptamer and CRISPR-Cas12a based systems for non-nucleic target detection.

Efficient and sensitive detection of targets is one of the motivations for constant development and innovation of various biosensors. CRISPR-Cas12a, a new generation of gene editing tools, has shown excellent application potential in biosensor design and construction. By combining with the specific recognition element-aptamer, a single-stranded oligonucleotide obtained by systematic evolution of ligands by exponential enrichment (SELEX) in vitro screening, CRISPR-Cas12a also shows superior performance non-nucleic acid targets detection, such as small molecules, proteins, virus and pathogenic bacteria. However, aptamer and CRISPR-Cas12a (CRISPR-Cas12a/Apt) still face some problems in non-nucleic acid target detection, such as single signal response mode and narrow linear range. The development of diverse CRISPR-Cas12a/Apt biosensors is necessary to meet the needs of various detection environments. In this review, the working principle of CRISPR-Cas12a/Apt was introduced and recent progress in CRISPR-Cas12a/Apt in the application of non-nucleic acid target detection was summarized. Moreover, the requirements of critical parameters such as crRNA sequence, activator sequence, and reaction system in the design of CRISPR-Cas12a/Apt biosensors were discussed, which could provide the reference for the design of efficient and sensitive novel non-nucleic acid target biosensors. In addition, the challenges and prospects of CRISPR-Cas12a/Apt-based biosensor were further presented.

Multi-mycotoxin detection and human exposure risk assessment in medicinal foods.

Mycotoxin contamination in medicinal foods has attracted increasing global attention. In this study, a simple and sensitive ultrasonication assisted one-step extraction based ultra-fast liquid chromatography-tandem mass spectrometry (UFLC-MS/MS) method was developed for simultaneous detection of multi-mycotoxins in five kinds of medicinal foods rich in starch. Under optimal conditions, the developed technique displayed excellent analytical performances. Limits of detection and quantitation for the six mycotoxins were 0.04-0.25 ng/mL and 0.10-0.67 ng/mL, respectively. Average recoveries at three fortified levels ranged from 75.33 % to 118.0 %. Real-world application in 103 batches of medicinal foods displayed that 58 samples were positive with one or more mycotoxins at an occurrence rate of 56.31 % (58/103). Coix seed gave the highest positive rate of 96.15 %, followed by Lily (90 %), Chinese yam (50 %), Lotus seed (34.04 %) and Malt (30 %). Zearalenone had the highest positive rate of 28.16 % with contents in 5 Coix seeds exceeding the maximum residue limit (MRL), followed by aflatoxin B1 of 27.18 % (28/103) with contents in 7 Coix seed and 10 Lotus seeds over its MRL, and ochratoxin A (OTA) of 11.65 % with contents in 1 Lotus seed and 5 Lily samples greater than its MRL. Exposure risk assessment indicated that Coix seed and Lotus seeds that were susceptible to aflatoxins posed great threats to human health. Long-term consumption of Lily that was easily contaminated with OTA were also harmful. This work provides a robust platform for multi-mycotoxin monitoring in medicinal foods to protect the consumers from potential health risks.

Ultrasensitive electrochemical aptasensor with Nafion-stabilized f-MWCNTs as signal enhancers for OTA detection.

In this study, an ultrasensitive electrochemical (EC) aptasensor with Nafion-stabilized functionalized multi-walled carbon nanotubes (f-MWCNTs) as signal enhancers was established for ochratoxin A (OTA) determination. Herein, f-MWCNTs were prepared through functionalization with nitric acid. The incorporation of Nafion promoted a good dispersion of f-MWCNTs and prevented their leaching on the electrode, making a robust stability of the aptasensor. The Nafion-f-MWCNTs composites were used as the sensing substrates to largely enhance the electroactive surface area and the conductivity of the electrode, realizing a significant signal amplification. Carboxyl groups on the surface of f-MWCNTs readily exposed from Nafion membrane to couple with streptavidin, facilitating the immobilization of biotinylated aptamers to achieve selective recognition towards OTA. When OTA existed, aptamers preferentially combined with it, causing a noticeable decline in the current response. Under optimum conditions, a good linear relationship between the current changes and the logarithm of OTA concentration was observed from 0.005 ng/mL to 10 ng/mL, with a limit of detection low to 1 pg/mL for OTA. The specific, sensitive, and reproducible aptasensor succeeded in application in malt samples, confirming a great promise for more contaminants and providing a universal platform in complex matrices by simply replacing the corresponding aptamers.

Iron-Catalyzed Cross-Coupling of α-Allenyl Esters with Grignard Reagents for the Synthesis of 1,3-Dienes.

Structurally diverse 1,3-dienes are valuable building blocks in organic synthesis. Herein we report the iron-catalyzed coupling between α-allenyl esters and Grignard reagents, which provides a fast and practical approach to a variety of complex substituted 1,3-dienes. The reaction involves an inexpensive iron catalyst, mild reaction conditions, and provides easy scale up.