Comparative studies of the sensitivities of sparse and full geometries of Total-Body PET scanners built from crystals and plastic scintillators.

BACKGROUND: Alongside the benefits of Total-Body imaging modalities, such as higher sensitivity, single-bed position, low dose imaging, etc., their final construction cost prevents worldwide utilization. The main aim of this study is to present a simulation-based comparison of the sensitivities of existing and currently developed tomographs to introduce a cost-efficient solution for constructing a Total-Body PET scanner based on plastic scintillators. METHODS: For the case of this study, eight tomographs based on the uEXPLORER configuration with different scintillator materials (BGO, LYSO), axial field-of-view (97.4 cm and 194.8 cm), and detector configurations (full and sparse) were simulated. In addition, 8 J-PET scanners with different configurations, such as various axial field-of-view (200 cm and 250 cm), different cross sections of plastic scintillator, and multiple numbers of plastic scintillator layers (2, 3, and 4), based on J-PET technology have been simulated by GATE software. Furthermore, Siemens' Biograph Vision has been simulated to compare the results with standard PET scans. Two types of simulations have been performed. The first one with a centrally located source with a diameter of 1 mm and a length of 250 cm, and the second one with the same source inside a water-filled cylindrical phantom with a diameter of 20 cm and a length of 183 cm. RESULTS: With regards to sensitivity, among all the proposed scanners, the ones constructed with BGO crystals give the best performance ([Formula: see text] 350 cps/kBq at the center). The utilization of sparse geometry or LYSO crystals significantly lowers the achievable sensitivity of such systems. The J-PET design gives a similar sensitivity to the sparse LYSO crystal-based detectors while having full detector coverage over the body. Moreover, it provides uniform sensitivity over the body with additional gain on its sides and provides the possibility for high-quality brain imaging. CONCLUSION: Taking into account not only the sensitivity but also the price of Total-Body PET tomographs, which till now was one of the main obstacles in their widespread clinical availability, the J-PET tomography system based on plastic scintillators could be a cost-efficient alternative for Total-Body PET scanners.

Efficiency determination of J-PET: first plastic scintillators-based PET scanner.

BACKGROUND: The Jagiellonian Positron Emission Tomograph is the 3-layer prototype of the first scanner based on plastic scintillators, consisting of 192 half-metre-long strips with readouts at both ends. Compared to crystal-based detectors, plastic scintillators are several times cheaper and could be considered as a more economical alternative to crystal scintillators in future PETs. JPET is also a first multi-photon PET prototype. For the development of multi-photon detection, with photon characterized by the continuous energy spectrum, it is important to estimate the efficiency of J-PET as a function of energy deposition. The aim of this work is to determine the registration efficiency of the J-PET tomograph as a function of energy deposition by incident photons and the intrinsic efficiency of the J-PET scanner in detecting photons of different incident energies. In this study, 3-hit events are investigated, where 2-hits are caused by 511 keV photons emitted in [Formula: see text] annihilations, while the third hit is caused by one of the scattered photons. The scattered photon is used to accurately measure the scattering angle and thus the energy deposition. Two hits by a primary and a scattered photon are sufficient to calculate the scattering angle of a photon, while the third hit ensures the precise labeling of the 511 keV photons. RESULTS: By comparing experimental and simulated energy distribution spectra, the registration efficiency of the J-PET scanner was determined in the energy deposition range of 70-270 keV, where it varies between 20 and 100[Formula: see text]. In addition, the intrinsic efficiency of the J-PET was also determined as a function of the energy of the incident photons. CONCLUSION: A method for determining registration efficiency as a function of energy deposition and intrinsic efficiency as a function of incident photon energy of the J-PET scanner was demonstrated. This study is crucial for evaluating the performance of the scanner based on plastic scintillators and its applications as a standard and multi-photon PET systems. The method may be also used in the calibration of Compton-cameras developed for the ion-beam therapy monitoring and simultaneous multi-radionuclide imaging in nuclear medicine.

The effect of different dietary ratios of lysine, arginine and methionine on protein nitration and oxidation reactions in turkey tissues and DNA.

An assumption was made in the study that the optimal inclusion levels and ratios of lysine (Lys), arginine (Arg) and methionine (Met) in diets with Lys content consistent with National Research Council (NRC) recommendations (1994) contribute to stimulate the antioxidant defense system and prevent disorders resulting from the oxidation and nitration of biologically important molecules. The experiment was carried out on 864 one-day-old Hybrid Converter turkeys divided into six experimental groups (8 replicates per group and 18 birds per replicate) receiving different levels of Arg and Met. Chickens from group Arg90Met30 received 90% Arg and 30% Met relative to Lys; Arg90Met45 - 90% Arg and 45% Met relative to Lys; Arg100Met30 - 100% Arg and 30% Met relative to Lys; Arg100Met45 - 100% Arg and 45% Met relative to Lys; Arg110Met30 - 110% Arg and 30% Met relative to Lys and Arg110Met45 - 110% Arg level and 45% Met level relative to the content of dietary Lys. In comparison with turkeys fed diets with moderate Arg content (100% of Lys content), a decrease in dietary Arg level (90% of Lys content) led to a decrease in plasma 3-nitrotyrosine (3-NT) concentration (163.6 vs. 141.0), whereas an increase in dietary Arg level (110% of Lys content) led to an increase in plasma 3-NT concentration (163.6 vs. 202.6). In comparison with turkeys fed diets with moderate Arg content (100% of Lys content), the lowest dietary Arg level (90% of Lys content) decreased superoxide dismutase (SOD) activity in the intestinal wall (19.68 vs. 17.41) and in the liver (11.51 vs. 7.94), increased SOD activity in the blood (507.6 vs. 961.4) and in breast muscles (6.26 vs. 7.43) and increased the concentration of malondiadehyde in breast muscles (1.10 vs. 1.50). An increase in dietary Met content from 30 to 45% of Lys content caused a decrease in plasma protein carbonyl concentration (4.33 vs. 3.8) and catalase activity in breast muscles (54.70 vs. 49.66), and an increase in SOD activity in the liver (8.90 vs. 10.41). The highest dietary Arg level (110% of Lys content) did not induce the oxidation of lipids, proteins or DNA, but it increased the risk of protein nitration. The lowest dietary Arg level (90% of Lys content) deteriorated the antioxidant status of turkeys. Regardless of dietary Arg levels, an increase in Met content from 30 to 45% of Lys content stimulated the antioxidant defense system of turkeys.

Effects of pea extrusion and enzyme and probiotic supplementation on performance, microbiota activity and biofilm formation in the broiler gastrointestinal tract.

1. The effects of supplementation of broiler chicken diets with pea meal, carbohydrase enzymes and a probiotic were investigated for potential performance improvement. 2. Raw or extruded pea meal (cv Model, grown in Poland) was included in a wheat-soybean meal-based diet at 250 g/kg. The diets were unsupplemented (control) or supplemented with either carbohydrase enzymes (200 U/kg xylanase and 10 U/kg ß-glucanase in feed) or a probiotic (Bacillus subtilis), or both. The diets were fed to Ross 308 broilers aged 9-28 days. 3. After two additional days, chick gastrointestinal tracts were excised and analysed for the presence of Bacillus subtilis biofilm; and the ileal and caecal digesta were analysed for bacterial enzyme activities and to determine the concentration of short-chain fatty acids (SCFAs). 4. Feeding the pea-based diet supplemented with the probiotic compromised feed utilisation, due to higher feed intake. The addition of enzymes to the raw, but not the extruded, pea containing diet partially ameliorated this effect (pea form × additives; P < 0.002). 5. In the ileal digesta, interactions between the dietary treatments were observed for the activities of all bacterial glycolytic enzymes and for SCFA concentrations. ß-glucosidase, α-galactosidase and ß-glucuronidase were highest in birds fed the diet containing extruded pea supplemented with the probiotic and enzymes (pea form x additives; P = 0.018 to P < 0.006). In the caecal digesta, interactions were observed for bacterial enzyme activities, but not for total SCFA concentration. Biofilm formation in the caecum indicated that the probiotic strain was metabolically active in the broiler gut. 6. In conclusion, supplementation of diets containing raw or extruded pea meal with enzymes and a Bacillus subtilis spore-based probiotic modulated microbiota activity but had no clear effects on broiler performance. Probiotic administration did not cause excessive fermentation in the ileum and caecum but enhanced Bacillus subtilis spp. biofilm formation in the caecum, which may be indicative of a beneficial effect on gut health.

The interactive effect of dietary n-6: n-3 fatty acid ratio and vitamin E level on tissue lipid peroxidation, DNA damage in intestinal epithelial cells, and gut morphology in chickens of different ages.

Feeding chickens diets high in n-3 fatty acids (FA) increases their incorporation into tissue lipids, but leads to oxidative stress in cells. This study investigated the effect of the dietary polyunsaturated FA ratio (PUFA n-6: n-3) and vitamin E (vE) level on DNA damage and morphological changes in the gut epithelium of chickens. One-day-old female broiler chicks (n = 176) were divided into 4 groups fed for 43 d diets with a high (HR) or low (LR) PUFA n-6: n-3 ratio and supplemented with 50 or 300 mg vE kg-1. Performance was calculated for periods of d 1 to 9, d 9 to 16, d 9 to 35, and d 9 to 42, while organs were sampled at d 9, d 17, d 36, and d 43. At d 17 and d 43, DNA damage of epithelial cells in the duodenum and jejunum was measured and duodenal and jejunal morphology was analyzed. HR diets improved FCR for the periods of d 1 to 9, d 9 to 16 and d 9 to 42, whereas the increased vE level improved FCR for the period of d 9 to 16. In the jejunum DNA damage was greater in chickens fed LR than HR diets at d 17 (P < 0.001) and the increased vE level promoted DNA damage in both intestinal segments (P < 0.02) in younger birds. The morphology of the duodenum was marginally affected by the diets, whereas LR diets in the jejunum reduced villus surface area at d 17 (P = 0.022), and mucosa thickness (P = 0.029) and villus height (P = 0.035) at d 43. The results indicated that feeding birds LR diets and vE levels significantly exceeding the recommendation induced DNA damage in epithelial cells, but this effect varied depending on the intestinal segment and the age of birds.

Viscosity negatively affects the nutritional value of blue lupin seeds for broilers.

This study examines the impact of Lupinus angustifolius variety (C) and inclusion level (L) in broiler diets on the nutritional value, viscosity of ileal digesta and activity of gut microbiota. The experiment was conducted on 154 female 21-day-old broilers, allocated to 11 groups (kept individually). A reference lupin-free diet and 10 test diets containing one of five lupin seeds; Kadryl, Regent, Dalbor, Bojar and Tango, mixed with the reference diet at a ratio of 25 : 75 or 32 : 68 dry matter (DM) (low or high level of inclusion) were prepared. Diets were fed for 6 days, excreta were collected over last 4 days. Apparent metabolizable energy corrected to zero N balance (AMEN) of diets and AMEN of lupin seeds were calculated. Birds were sacrificed, ileal and caecal digesta were pooled by segments from two birds, and the activity of bacterial enzymes was determined. The ileal digesta viscosity was measured immediately (ileal viscosity immediate (IVI)) or after 6 days storage at -18°C (ileal viscosity frozen). AMEN of test diets were lower than the reference diet. Lupin AMEN values ranged from 6.04 MJ/kg DM for Regent at high level to 9.25 MJ/kg DM for Bojar at low level. High inclusion level numerically decreased AMEN value in all cultivars, except for Kadryl, for which it increased (significant C×L interaction). The IVI value was 2.6 mPa·s in the reference group, but ranged from 6.3 to 21.7 mPa·s in lupin-fed birds. It increased significantly with level for Regent, Dalbor and Tango but not for the other two cultivars (significant C×L interaction). There was a negative correlation between IVI and: apparent total tract N retention, fat digestibility from test diets, AMEN of diets and lupins. Ileal viscosity immediate was positively correlated with the activity of ileal α- and ß-glucosidase and negatively with ileal α-galactosidase and caecal α-glucosidase. Ileal viscosity frozen ranged from 3.2 to 5 mPa·s and it was not correlated with lupins AMEN. This suggests that the digesta viscosity caused by narrow-leafed lupin is detrimental to its nutritional value and interfere with the gut microbial activity. In addition, the lupins viscosity was measured by two in vitro methods: the water extract viscosity (WEV) method and after incubation in conditions imitating in vivo digestion (enzyme-treated extract viscosity (EEV)). In vivo viscosity was weakly reflected by in vitro measurements as there was no correlation between IVI and WEV or EEV. Overall, findings suggest that the different cultivars of narrow-leafed lupin may have different value for practical application in broiler diets.

Beneficial effects of enrichment of chicken meat with n-3 polyunsaturated fatty acids, vitamin E and selenium on health parameters: a study on male rats.

Consumption of chicken meat enriched with bioactive compounds such as n-3 polyunsaturated fatty acids (PUFAn-3), vitamin E (vE) and selenium (Se) can help prevent many diseases and can be used to deliver those substances to humans. This might be of importance as chicken meat consumption is increasing worldwide. The effects of enriching chicken meat with PUFAn-3, vE and Se through dietary interventions were studied in rats. Four groups of Ross 308 female broilers from day 22 to day 35 of age were fed control diet (L) that contained lard and 80 mg vE and 0.3 mg Se/kg, or diets that contained rape seeds and fish oil with the same level of Se and vE as in the control diet, the same level of Se as in the control and 150 mg vE/kg, or 150 mg of vE and 0.7 mg Se/kg. Broiler carcasses were boiled, deboned, lyophilized and pooled by group. Boiled edible components of chicken carcass (BECC) were included (240 g/kg) in the diets fed to four groups of ten 10-week-old Wistar male rats for 8 weeks. Inclusion of BECCs modulated dietary fatty acid profile in the rat diets. Feeding these diets did not influence parameters related to growth or relative weights of internal organs in the rats. Feeding BECCs with lower PUFAn-6/n-3 decreased the n-6/n-3 ratio in the rat brain and liver, and increased the proportion of docosahexaenoic acid in the brain lipids. Liver cholesterol level was similar among the experimental groups, whereas the concentration of vE in the liver of rats fed BECC with increased vE levels was higher than that in the rats fed BECC with the basal vE level. Haematological and biochemical parameters in blood were within the normal range for rats, but a few rats showed a tendency towards increased levels because of the higher vE and Se level. The health-promoting effect of feeding rats PUFAn-3 enriched BECC was more pronounced when an increased dietary level of vE was used, but the increased level of Se did not provide the rats with additional benefits. Thus, the findings indicate that BECC enriched with PUFAn-3 and vE by a dietary intervention is a functional food with great potential of implementation.

Interactive effects of dietary lipids and vitamin E level on performance, blood eicosanoids, and response to mitogen stimulation in broiler chickens of different ages.

The effects of the dietary polyunsaturated fatty acids (PUFA) n-6:n-3 ratio and vitamin E (vE) on the levels of pro-inflammatory eicosanoids, the incorporation of docosahexaenoic acid (DHA) and arachidonic acid (AA) into immune tissues, and changes in leukocyte population after phytohemagglutinin (PHA) challenge were investigated in broiler chickens of different ages. One-day-old female broilers (48 per treatment) were fed 4 different wheat-soybean-corn-based diets containing corn oil with a high PUFA n-6:n-3 ratio (HR) or a mixture of linseed and fish oils with a low PUFA n-6:n-3 ratio (LR). Diets contained either 50 mg vE kg-1 of diet (basal vE) or 300 mg vE kg-1 of diet (increased vE). At d 14 and d 34, 8 chickens per treatment were challenged with PHA, and wing web swelling (WWS) was measured. The blood concentration of leukotriene (LTB4), prostaglandin (PGE2), and thromboxane (TBX2) in 17-day-old and 43-day-old chickens was determined. The pattern of AA and DHA incorporation into bursa, spleen, and brain lipids reflected the level of their precursors in the diet. WWS was the highest in chickens fed a LR diet and in 14-day-old chickens (P < 0.01). Leukocyte proportions varied with dietary PUFA n-6:n-3 ratio and with age. The heterophil:lymphocyte ratio was the highest at 6 h post PHA challenge, and was higher in 34-day-old chickens (P < 0.001). TBX2 and PGE2 concentrations were higher in chickens fed HR diet, whereas TBX2 and LTB4 concentrations were lower at high vE level. Lower PGE2 and LTB4, but higher TBX2 concentrations were measured in younger birds (P < 0.001). The results indicated that LR increased the phagocytic cell proportion in the blood; HR promoted the incorporation of AA into the immune tissues, which increased the levels of more pro-inflammatory eicosanoids in the blood; and vE counteracts these effects to some extent. Owing to the immaturity of the immune system, dietary interventions might be promising at the early stage of chicken growth.

Development of laboratory reference material: Soil 1. Baseline and highly elevated concentrations of metals and polycyclic aromatic hydrocarbons.

Reference materials play a key part in systems of inspection and quality control of results of analytical measurements. The main limitation in using certified reference materials (CRM) is their high price, which results from the long and costly process of producing the reference material. An alternative to costly CRM materials is the employment of laboratory reference materials, particularly for interlaboratory control of measurement results and procedures. Under the auspices of the Chair of Analytical Chemistry at the Chemical Department of Gdansk University of Technology, research on the development of new reference materials is being conducted. At present, the research is aimed at producing a new laboratory reference material (LRM): 'Soil 1. Baseline and Highly Elevated Concentrations of Metals and Polycyclic Aromatic Hydrocarbons' - LRM soil 1. This paper presents the production stages of the developed laboratory reference material: acquisition of raw material from soil samples taken from the environment of the Tri-city (in Polish, Trójmiasto Gdansk, Sopot, Gdynia) bypass road, homogenization and subsequent dosage into appropriate containers, tests of homogeneity of sampled material within one container and between containers, based on the results of the determination of selected parameters (total carbon, content of optional metals - Hg, Fe, Cu Zn, Mn, Mg, water content, content of PAH-group analytes). The obtained results of homogeneity tests of the proposed future laboratory reference material have confirmed the homogeneity of soil samples within a container and between containers. Currently, interlaboratory tests are being carried out to determine the reference value.

Metal-coated fused silica fibers as a support for immobilized compounds yielding a volatile analyte (C2H4).

This paper presents the results of investigations of chemically modified fibers comprising an immobilized compound that yields ethene as the analyte in generated standard gaseous mixtures. Prior to chemical modification, the fibers were coated with a thin aluminum layer to improve their mechanical strength. Commercially available Al-coated fibers were used in this work. During thermal decomposition of the immobilized compound, reproducible quantities of the analyte per unit fiber length were obtained for all the investigated fibers (fiber diameter (microm)/outside diameter (microm) of the Al-coated fiber=110/146, 220/300, and 660/830), amounting to 0.685+/-0.032, 0.8300+/-0.0081, and 1.092+/-0.010 ng cm(-1), respectively. The proposed procedure can be used successfully for the generation of measured component of matrix-free reference materials.

New procedure of silica gel surface modification preparation of gaseous standard mixtures for calibration purposes.

The new type of silica gel surface modification with using the trimethylamine as a reagent is described. The samples of chemically modified silica gel have been used for generation of gaseous standard mixtures (methyl chloride as a measurand) using the technique of thermal decomposition of the surface compound. The main aim of the research was to check the suitability of the new type of silica gel surface modification for obtaining methyl chloride as a measurand of gaseous standard mixture. The gaseous standard mixture obtained with using this technique was used for calibration of a thermal desorber-gas chromatography-flame ionization detector (TD-GC-FID) system. The homogeneity of coverage of silica gel surface with the immobilized compound has been evaluated. The full uncertainty budget of determination of liberated amount of methyl chloride has been calculated. The average amount of methyl chloride liberated from the unit sample of chemically modified silica gel is 3.59 +/- 0.13 mg g(-1). The influence of the modification way on the amount of liberated analyte has also been determined.

Determination of tributyltin in marine sediment: Comité Consultatif pour la Quantité de Matière (CCQM) pilot study P-18 international intercomparison.

The capabilities of National Metrology Institutes (NMIs-those which are members of the Comité Consultatif pour la Quantité de Matière (CCQM)of the CIPM) and selected outside "expert" laboratories to quantitate (C(4)H(9))(3)Sn(+) (TBT) in a prepared marine sediment were assessed. This exercise was sanctioned by the 7th CCQM meeting, April 4-6, 2001, as an activity of the Inorganic Analysis Working Group and was jointly piloted by the Institute for National Measurement Standards of the National Research Council of Canada (NRC) and the Laboratory of the Government Chemist (LGC), UK. A total of 11 laboratories submitted results (7 NMIs, and 4 external labs). Two external laboratories utilized a standard calibration approach based on a natural abundance TBT standard, whereas all NMIs relied upon isotope dilution mass spectrometry for quantitation. For this purpose, a species specific (117)Sn-enriched TBT standard was supplied by the LGC. No sample preparation methodology was prescribed by the piloting laboratories and, by consequence, a variety of approaches was adopted by the participants, including mechanical shaking, sonication, accelerated solvent extraction, microwave assisted extraction and heating in combination with Grignard derivatization, ethylation and direct sampling. Detection techniques included ICP-MS (with GC and HPLC sample introduction), GC-MS, GC-AED and GC-FPD. Recovery of TBT from a control standard (NRCC CRM PACS-2 marine sediment) averaged 93.5+/-2.4% ( n=14). Results for the pilot material averaged 0.680+/-0.015 micro mol kg(-1) ( n=14; 80.7+/-1.8 micro g kg(-1)) with a median value of 0.676 micro mol kg(-1). Overall, performance was substantially better than state-of-the-art expectations and the satisfactory agreement amongst participants permitted scheduling of a follow-up Key comparison for TBT (K-28), a Pilot intercomparison for DBT (P-43), and certification of the test sediment for TBT content and its release as a new Certified Reference Material (HIPA-1) with a TBT content of 0.679+/-0.089 micro mol kg(-1) (expanded uncertainty, k=2, as Sn) (80.5+/-10.6 micro g kg(-1)).

Use of porous glass and silica gel as support media of a surface compound for generation of analytes in gaseous standard mixtures. New method for the determination of the amount of analyte generated.

The paper presents a new method for the determination of a volatile component of a gaseous standard mixture obtained by thermal decomposition of a suitable surface compound. The amount of the analyte generated (under given conditions of thermal decomposition) per unit of mass of the chemically modified material has been determined exclusively on the basis of measuring generation time. Therefore, the total error of the determination of the amount of a standard compound depends solely on the respective errors of weighing the material and measuring its decomposition time (both being direct measurements). This new method permits obtaining a few measuring points on the basis of a single sample of the material with chemically modified surface.

Influence of process parameters on the composition of gaseous standard mixtures of n-propanethiol obtained by thermal decomposition of surface compounds.

A method for preparation of gaseous standard mixtures of n-propanethiol based on thermal decomposition of surface immobilized compounds bonded to silica gel is described. On the basis of the experimentally established relationships between n-propanethiol concentration and generation time, the influence of the mixture composition on diluting gas flow rate, decomposition temperature, and surface compound bed mass was determined.