Occurrence of organic phosphates in particulate matter of the vehicle exhausts and outdoor environment - A case study.

The occurrence and concentrations of a wide range of organic phosphates (OPEs) in vehicle's exhaust (VPM), ambient air particulate matter (APM), and soil of various urban environments were researched. VPM comes from passenger cars, commercial vehicles, marine and bus engines emitted in New European Driving Cycle tests whereas APM was sampled in several sites of the Upper Silesia region (Poland). APM and VPM collected on filters and soil from the same locations as APM sampling sites were extracted with dichloromethane and extracts analyzed by gas chromatography-mass spectrometry. The OPEs found include aryl phosphates such as triphenyl phosphate (TPhP) and tricresyl phosphate (TCP), alkyl phosphates - triethyl phosphate (TEP), tripropyl phosphate (TPP), tributyl phosphate (TBP) and tri(butoxyethyl)phosphate (TBEP), and alkylchlorinated phosphates including tris-(2-chloroisopropyl) phosphate (TCiPP) and tris(2-chloroethyl) phosphate (TCEP). Occurrence and concentrations of these compounds in the PM investigated are highly variable. It was found that total concentrations in APM are directly related to traffic density in particular sites of the urban environment and a style of a vehicle driving. The highest emission of OPEs was found at a crossroad and city center sites where traffic is the densest and vehicles stops and starts are frequent. Village and residential areas were less exposed to OPEs emission. Since OPEs concentrations show exponential correlations to each other also human exposure to these compounds increases exponentially with increasing traffic density. High TEP and TBP level is tentatively proposed as an indicator of emission from petrol-fueled cars. Concentrations of OPEs in some soil are related to their emission to the air and resistance to degradation of a particular compound since only the most resistant TCiPP and TPhP were identified in soil extracts.

Distribution of coal and coal combustion related organic pollutants in the environment of the Upper Silesian Industrial Region.

In this study, a large sample set (276) was separated into up to 15 groups, including coal, fly ash, total particulate matter, coal wastes, river sediments, and different water types. Grouping the sample set into these categories helped to identify the typical features of combustion or water-washing and compare them using newly developed polycyclic aromatic hydrocarbon diagnostic ratios. A wide range of organic pollutants were identified in samples, including aromatic and polycyclic hydrocarbons, nitrogen-heterocycles, sulphur-heterocycles + trithiolane, and polycyclic aromatic hydrocarbons substituted with oxygen functional groups. The distribution of compounds was significantly influenced by water washing or combustion. During the self-heating of coal wastes, secondary compounds such as chlorinated aromatics (chlorobenzene, chloroanthracene, etc.) or light sulphur compounds (e.g. benzenethiol and benzo[b]thiophene) were formed (synthesised). Since these compounds are generally absent in sedimentary organic matter, their origin may be connected with high-temperature formation in burning coal dumps. These compounds should be identified as persistent organic pollutants (POPs) in the environment. The newly defined diagnostic ratios have worked well in separating samples (petrogenic and pyrogenic) and have pointed out the effect of incomplete combustion on self-heated coal waste, ash from domestic furnaces, or water washing and biodegradation of the studied compounds.

Geochemical markers and polycyclic aromatic hydrocarbons in solvent extracts from diesel engine particulate matter.

Exhaust particulate from compression ignition (CI) engines running on engine and chassis dynamometers was studied. Particulate dichloromethane extracts were qualitatively and quantitatively analyzed for polycyclic aromatic hydrocarbons (PAHs) and biomarkers by gas chromatography with flame ionization detector (GC-FID) and gas chromatography-mass spectrometry (GC-MS). PAH group profiles were made and the PAH group shares according to the number of rings (2 or 3; 4; 5 or more) as well as diagnostic indices were calculated. Values of geochemical ratios of selected biomarkers and alkyl aromatic hydrocarbons were compared with literature values. A geochemical interpretation was carried out using these values and biomarker and alkyl aromatic hydrocarbon distributions. It has been shown that geochemical features are unequivocally connected to the emission of fossil fuels and biofuels burned in CI engines. The effect of the exothermic combustion process is limited to low-molecular-weight compounds, which shows that the applied methodology permits source identification of PAHs coexisting in the particulate emitted.

Sources of organic pollution in particulate matter and soil of Silesian Agglomeration (Poland): evidence from geochemical markers.

The exact input of particular sources to polycyclic aromatic hydrocarbons (PAHs) concentrations in urban and industrial agglomerations is still not well recognized. The major breakthrough is possible using geochemical markers. In the air aerosol and soil samples from areas located in the direct influence of industry/traffic in Silesian Agglomeration (Poland), PAHs and other organic compounds were analyzed, including geochemical markers (biomarkers) and polar compounds from fossil fuels and biomass. Gas chromatography (GC-FID) and gas chromatography-mass spectrometry (GC-MS) were applied to investigate the composition of particulate matter and soil extracts. The results suggest that the predominant source of PAHs is fossil fuel. The presence and distribution of steranes, pentacyclic triterpenoids (i.e., hopanes and moretanes) and alkyl PAHs point to traffic emissions and fossil fuel combustion, mainly bituminous coal for power and heat purposes, as the main source of PAHs in the region. Moreover, the presence of fossil fuel biomarker in particulate matter and soil extracts from a rural site, previously considered to be free of organic pollution, requires a cautious interpretation for PAHs results. Apart from the fossil fuel, also other sources of contamination were identified in particulate matter extracts by their markers: phenols and levoglucosan for biomass and diisopropylnaphthalenes for printing materials combustion. The absence of polar biomass combustion indicators in soil extracts might be related to their higher reactivity.

The release of trace elements in the process of coal coking.

In order to assess the penetration of individual trace elements into the air through their release in the coal coking process, it is necessary to determine the loss of these elements by comparing their contents in the charge coal and in coke obtained. The present research covered four coke oven batteries differing in age, technology, and technical equipment. By using mercury analyzer MA-2 and the method of ICP MS As, Be, Cd, Co, Hg, Mn, Ni, Se, Sr, Tl, V, and Zn were determined in samples of charge coal and yielded coke. Basing on the analyses results, the release coefficients of selected elements were determined. Their values ranged from 0.5 to 94%. High volatility of cadmium, mercury, and thallium was confirmed. The tests have shown that although the results refer to the selected case studies, it may be concluded that the air purity is affected by controlled emission occurring when coke oven batteries are fired by crude coke oven gas. Fugitive emission of the trace elements investigated, occurring due to coke oven leaks and openings, is small and, is not a real threat to the environment except mercury.

PCDDs/PCDFs, dl-PCBs and HCB in the flue gas from coal fired CFB boilers.

The aim of the project was to measure the actual emissions of polychlorinated dibenzodioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorinated biphenyls (dl-PCBs) and hexachlorobenzene (HCB) from four selected power plants in Poland in order to update the national inventory of PCDDs/PCDFs emission. Relatively low PCDDs/PCDFs as well as dl-PCBs concentrations in flue gas obtained in measurements in this study for four different circulated fluidized bed (CFB) boilers indicate practical absence of any hazards caused by PCDDs/PCDFs emission from these units. The results of PCDDs/PCDFs determination obtained in this study indicate that hard coal combustion in large CFB in the four central heating plants (CHP) is not a significant source of PCDDs/PCDFs emission to the environment even if operated by co-firing of waste coal. PCDDs/PCDFs concentration in flue gases as well as emission factors were recorded in the range of 0.012-0.060 ng I-TEQ/m(n)(3) and 7.51-46.4 microg I-TEQ/TJ, respectively. Dl-PCBs concentration was practically below the LOQ=0.006 ng WHO-PCB TEQ/m(n)(3) in all experiments. HCB concentration as well as emission factors were recorded in the range of 11.5-42.0 ng/m(n)(3) and 6.19-26.7 mg/TJ, respectively, where the highest value was obtained for co-firing of waste coal, however. Obtained in this work emission factors will be used for national emission inventory purposes instead of the factors proposed by Toolkit or taken from previous measurements. However, consideration should be given to the fact that the measurements in most cases are related to single installations. Therefore, the need for further development of national factors for the power generation industry in Poland is desired.