Comparative Study of Sample Carriers for the Identification of Volatile Compounds in Biological Fluids Using Raman Spectroscopy.

Vibrational spectroscopic techniques and especially Raman spectroscopy are gaining ground in substituting the officially established chromatographic methods in the identification of ethanol and other volatile substances in body fluids, such as blood, urine, saliva, semen, and vaginal fluids. Although a couple of different carriers and substrates have been employed for the biochemical analysis of these samples, most of them are suffering from important weaknesses as far as the analysis of volatile compounds is concerned. For this reason, in this study three carriers are proposed, and the respective sample preparation methods are described for the determination of ethanol in human urine samples. More specifically, a droplet of the sample on a highly reflective carrier of gold layer, a commercially available cuvette with a mirror to enhance backscattered radiation sealed with a lid, and a home designed microscope slide with a cavity coated with gold layer and covered with transparent cling film have been evaluated. Among the three proposed carriers, the last one achieved a quick, simple, and inexpensive identification of ethanol, which was used as a case study for the volatile compound, in the biological samples. The limit of detection (LoD) was found to be 1.00 µL/mL, while at the same time evaporation of ethanol was prevented.

Measuring Bismuth Oxide Particle Size and Morphology in Film-Coated Tablets.

The assessment of active pharmaceutical ingredient (API) particle size and morphology is of great importance for the pharmaceutical industry since it is expected to significantly affect physicochemical properties. However, very few methods are published for the determination of API morphology and particle size of film-coated (FC) tablets. In the current study we provide a methodology for the measurement of API particle size and morphology which could be applied in several final products. Bismuth Oxide 120 mg FC Tabs were used for our method development, which contain bismuth oxide (as tripotassium dicitratobismuthate (bismuth subcitrate)) as the active substance. The sample preparation consists of partial excipient dissolution in different solvents. Following this procedure, the API particles were successfully extracted from the granules. Particle size and morphology identification in Bismuth Oxide 120 mg FC Tabs was conducted using micro-Raman mapping spectroscopy and ImageJ software. The proposed methodology was repeated for the raw API material and against a reference listed drug (RLD) for comparative purposes. The API particle size was found to have decreased compared to the raw API, while the API morphology was also affected from the formulation manufacturing process. Comparison with the RLD product also revealed differences, mainly in the API particle size and secondarily in the crystal morphology.

Formation and Characterisation of Posaconazole Hydrate Form.

Posaconazole is an API added as Form I for the production of oral suspensions, but it is found as Form-S in the final formulation. In this study, it was found that this polymorphic conversion, which may affect the bioavailability, is due to an interaction with water. However, the relatively poor wettability of posaconazole Form I renders the complete wetting of its particles and production of pure Form-S challenging. Consequently, for its isolation, Form I should be dispersed in water followed by application of sonication for at least 10 min. Pure posaconazole Form-S was characterised using X-ray powder diffraction (XRPD), Raman spectroscopy, attenuated total reflection (ATR) spectroscopy, thermogravimetric analysis (TGA) and optical microscopy. From these techniques, posaconazole Form-S was characterised as a hydrate form, which includes three molecules of water per API molecule.

Warfarin Sodium Stability in Oral Formulations.

Warfarin sodium is a low-dose pharmaceutical blood thinner that exists in two forms: the clathrate form and the amorphous form. In commercially available warfarin sodium oral suspension, the active pharmaceutical ingredient (API) is added in the amorphous state. This study investigates the apparent instability of the commercially available warfarin liquid oral formulation using Raman and IR spectroscopy, X-ray diffraction, differential scanning calorimetry, UV spectroscopy, and optical microscopy. Warfarin, not its sodium salt, was identified as the undissolved solid existing in the suspension. This was found to be due to the dissociation of sodium salt and the protonation of the warfarin ion in the liquid phase, which triggered the crystallization of the sparingly soluble unsalted form. The coexistence of protonated and unprotonated warfarin ions in the supernatant, as detected by Raman and UV spectroscopy, confirmed this assumption. Study of the dissolution of warfarin sodium amorphous salt and crystalline sodium clathrate in the placebo and pure water verified the results. The effect of pH and temperature on warfarin precipitation was also explored.

Analysis of IV Drugs in the Hospital Workflow by Raman Spectroscopy: The Case of Piperacillin and Tazobactam.

Medical errors associated with IV preparation and administration procedures in a hospital workflow can even cost human lives due to the direct effect they have on patients. A large number of such incidents, which have been reported in bibliography up to date, indicate the urgent need for their prevention. This study aims at proposing an analytical methodology for identifying and quantifying IV drugs before their administration, which has the potential to be fully harmonized with clinical practices. More specifically, it reports on the analysis of a piperacillin (PIP) and tazobactam (TAZ) IV formulation, using Raman spectroscopy. The simultaneous analysis of the two APIs in the same formulation was performed in three stages: before reconstitution in the form of powder without removing the substance out of the commercial glass bottle (non-invasively), directly after reconstitution in the same way, and just before administration, either the liquid drug is placed in the infusion set (on-line analysis) or a minimal amount of it is transferred from the IV bag to a Raman optic cell (at-line analysis). Except for the successful identification of the APIs in all cases, their quantification was also achieved through calibration curves with correlation coefficients ranging from 0.953 to 0.999 for PIP and from 0.965 to 0.997 for TAZ. In any case, the whole procedure does not need more than 10 min to be completed. The current methodology, based on Raman spectroscopy, outweighs other spectroscopic (UV/Vis, FT-IR/ATR) or chromatographic (HPLC, UHPLC) protocols, already applied, which are invasive, costly, time-consuming, not environmentally friendly, and require specialized staff and more complex sample preparation procedures, thus exposing the staff to hazardous materials, especially in cases of cytotoxic drugs. Such an approach has the potential to bridge the gap between experimental setup and clinical implementation through exploitation of already developed handheld devices, along with the presence of digital spectral libraries.

FT-IR/ATR Solid Film Formation: Qualitative and Quantitative Analysis of a Piperacillin-Tazobactam Formulation.

FT-IR/ATR analytical technique is one of the most applicable techniques worldwide. It is closely associated with easy-to-use equipment, rapid analysis, and reliable results. This study reports the simultaneous qualitative and quantitative analysis of two active pharmaceutical ingredients (APIs), of a piperacillin and tazobactam formulation using a film formation method. This method requires film formation on the ATR crystal, resulting from solvent evaporation of a small amount of liquid sample. Good contact between the film and the crystal led to the identification of both APIs, although tazobactam was of low content in the formulation mixture. The quantification of the APIs in the commercial mixture was also achieved, using a single calibration line with a correlation coefficient equal to 0.999, not only after film formation but also in the initial dry formulation before reconstitution. The present spectroscopic technique combined with the proposed relatively simple sample treatment outweighs chromatographic protocols already applied, which require specialized staff and are costly, time-consuming, and not environmentally friendly. Taking all the above into consideration, it turns out that such an approach has the potential to be used for off-line quality control procedures in manufacture or, in terms of portable equipment and automated software, anywhere for on-site analysis, even in a hospital workflow.

Sample Preparation of Posaconazole Oral Suspensions for Identification of the Crystal Form of the Active Pharmaceutical Ingredient.

Determination of the polymorphic form of an active pharmaceutical ingredient (API) in a suspension could be really challenging because of the water phase and the low concentration of the API in this formulation. Posaconazole is an antifungal drug available also as an oral suspension. The aim of this study was to develop a sample-preparation method for polymorphic identification of the dispersed API by increasing the concentration of the API but with no compromise of polymorph stability. For this purpose, filtration, drying and centrifugation were tested for separating the API from the suspending medium. Centrifugation was selected because it succeeded in separating Posaconazole API with no polymorph transformation during the process. During this study, it was found that Posaconazole in oral suspensions is Form-S. However, when slower scanning rates were used for acquiring an XRPD pattern with better signal/noise ratio, Posaconazole was converted to Form I due to water loss. In order to protect the sample from conversion, different approaches were tested to secure an airtight sample including a commercially available XRPD sample holder with a dome-like transparent cap, standard polymethylmethacrylate (PMMA) sample holders covered with Mylar film, transparent pressure-sensitive tape and a transparent food membrane. Only usage of the transparent food membrane was found to protect the API from conversion for a period of at least two weeks and resulted in a Posaconazole Form-S XRPD pattern with no artificial peaks.

Changes in size and composition of pigweed (Amaranthus hybridus L.) calcium oxalate crystals under CO2 starvation conditions.

The functional role(s) of plant calcium oxalate (CaOx) crystals are still poorly understood. Recently, it was shown that crystals function as dynamic carbon pools whose decomposition could provide CO2 to photosynthesis when stomata are closed (e.g. under drought conditions) and CO2 starvation conditions may be created within the mesophyll. This biochemical process, named as 'alarm photosynthesis', can become crucial for plant survival under adverse conditions. Here, we study crystal decomposition under controlled CO2 starvation conditions (either in the shoot or in the root) to obtain a better insight into the process of crystal formation and function. Hydroponically grown pigweed plants were kept in CO2 -free air and/or CO2 -free nutrient medium for 9 days. Crystal volume was monitored daily, and carbon stable isotope composition (δ13 C) and Fourier transformation Raman spectra were obtained at the end of the experiment. A considerable reduction in the leaf crystal volume was observed in shoot-CO2 -starved plants at the end of the experiment. The smallest crystals were isolated from the plants in which carbon was excluded from both the shoot and the root and contained potassium nitrate. Crystal δ13 C of CO2 -starved plants was altered in a predicted way. Specifically, it depended on the average calculated isotope fractionation of all carbon fixation processes considered to be contributing in each experimental treatment. The results of the present study confirmed the correlation between CO2 starvation conditions and the CaOx crystal decomposition. Inorganic carbon fixed in the root may represent a major carbon source for CaOx formation.

Detection and quantitative determination of heavy metals in electronic cigarette refill liquids using Total Reflection X-ray Fluorescence Spectrometry.

Electronic cigarettes are considered healthier alternatives to conventional cigarettes containing tobacco. They produce vapor through heating of the refill liquids (e-liquids) which consist of propylene glycol, vegetable glycerin, nicotine (in various concentrations), water and flavoring agents. Heavy metals may enter the refill liquid during the production, posing a risk for consumer's health due to their toxicity. The objective of the present study was the development of a methodology for the detection and quantitative analysis of cadmium (Cd), lead (Pb), nickel (Ni), copper (Cu), arsenic (As) and chromium (Cr), employing Total Reflection X-Ray Fluorescence Spectroscopy (TXRF) as an alternative technique to ICP-MS or ICP-OES commonly used for this type of analysis. TXRF was chosen due to its advantages, which include short analysis time, promptness, simultaneous multi-element analysis capability and minimum sample preparation, low purchase and operational cost. The proposed methodology was applied to a large number of electronic cigarette liquids commercially available, as well as their constituents, in order to evaluate their safety. TXRF may be a valuable tool for probing heavy metals in electronic cigarette refill liquids to serve for the protection of human health.

Reevaluation of the plant "gemstones": Calcium oxalate crystals sustain photosynthesis under drought conditions.

Land plants face the perpetual dilemma of using atmospheric carbon dioxide for photosynthesis and losing water vapors, or saving water and reducing photosynthesis and thus growth. The reason behind this dilemma is that this simultaneous exchange of gases is accomplished through the same minute pores on leaf surfaces, called stomata. In a recent study we provided evidence that pigweed, an aggressive weed, attenuates this problem exploiting large crystals of calcium oxalate as dynamic carbon pools. This plant is able to photosynthesize even under drought conditions, when stomata are closed and water losses are limited, using carbon dioxide from crystal decomposition instead from the atmosphere. Abscisic acid, an alarm signal that causes stomatal closure seems to be implicated in this function and for this reason we named this path "alarm photosynthesis." The so-far "enigmatic," but highly conserved and widespread among plant species calcium oxalate crystals seem to play a crucial role in the survival of plants.

Alarm Photosynthesis: Calcium Oxalate Crystals as an Internal CO2 Source in Plants.

Calcium oxalate crystals are widespread among animals and plants. In land plants, crystals often reach high amounts, up to 80% of dry biomass. They are formed within specific cells, and their accumulation constitutes a normal activity rather than a pathological symptom, as occurs in animals. Despite their ubiquity, our knowledge on the formation and the possible role(s) of these crystals remains limited. We show that the mesophyll crystals of pigweed (Amaranthus hybridus) exhibit diurnal volume changes with a gradual decrease during daytime and a total recovery during the night. Moreover, stable carbon isotope composition indicated that crystals are of nonatmospheric origin. Stomatal closure (under drought conditions or exogenous application of abscisic acid) was accompanied by crystal decomposition and by increased activity of oxalate oxidase that converts oxalate into CO2 Similar results were also observed under drought stress in Dianthus chinensis, Pelargonium peltatum, and Portulacaria afra Moreover, in A. hybridus, despite closed stomata, the leaf metabolic profiles combined with chlorophyll fluorescence measurements indicated active photosynthetic metabolism. In combination, calcium oxalate crystals in leaves can act as a biochemical reservoir that collects nonatmospheric carbon, mainly during the night. During the day, crystal degradation provides subsidiary carbon for photosynthetic assimilation, especially under drought conditions. This new photosynthetic path, with the suggested name "alarm photosynthesis," seems to provide a number of adaptive advantages, such as water economy, limitation of carbon losses to the atmosphere, and a lower risk of photoinhibition, roles that justify its vast presence in plants.

Apolipoprotein A-1 regulates osteoblast and lipoblast precursor cells in mice.

Imbalances in lipid metabolism affect bone homeostasis, altering bone mass and quality. A link between bone mass and high-density lipoprotein (HDL) has been proposed. Indeed, it has been recently shown that absence of the HDL receptor scavenger receptor class B type I (SR-B1) causes dense bone mediated by increased adrenocorticotropic hormone (ACTH). In the present study we aimed at further expanding the current knowledge as regards the fascinating bone-HDL connection studying bone turnover in apoA-1-deficient mice. Interestingly, we found that bone mass was greatly reduced in the apoA-1-deficient mice compared with their wild-type counterparts. More specifically, static and dynamic histomorphometry showed that the reduced bone mass in apoA-1(-/-) mice reflect decreased bone formation. Biochemical composition and biomechanical properties of ApoA-1(-/-) femora were significantly impaired. Mesenchymal stem cell (MSC) differentiation from the apoA-1(-/-) mice showed reduced osteoblasts, and increased adipocytes, relative to wild type, in identical differentiation conditions. This suggests a shift in MSC subtypes toward adipocyte precursors, a result that is in line with our finding of increased bone marrow adiposity in apoA-1(-/-) mouse femora. Notably, osteoclast differentiation in vitro and osteoclast surface in vivo were unaffected in the knock-out mice. In whole bone marrow, PPARγ was greatly increased, consistent with increased adipocytes and committed precursors. Further, in the apoA-1(-/-) mice marrow, CXCL12 and ANXA2 levels were significantly decreased, whereas CXCR4 were increased, consistent with reduced signaling in a pathway that supports MSC homing and osteoblast generation. In keeping, in the apoA-1(-/-) animals the osteoblast-related factors Runx2, osterix, and Col1a1 were also decreased. The apoA-1(-/-) phenotype also included augmented CEPBa levels, suggesting complex changes in growth and differentiation that deserve further investigation. We conclude that the apoA-1 deficiency generates changes in the bone cell precursor population that increase adipoblast, and decrease osteoblast production resulting in reduced bone mass and impaired bone quality in mice.

Simultaneous determination of allantoin and glycolic acid in snail mucus and cosmetic creams with high performance liquid chromatography and ultraviolet detection.

A new methodology for simultaneous quantitative analysis of allantoin and glycolic acid in snail mucus and cosmetic creams was developed. HPLC separation was achieved a Synergi-Hydro RP column within 7min using isocratic elution with potassium phosphate (pH 2.7; 10mM) at a flow rate of 0.7mL/min at 30°C. Sample pretreatment was performed by dilution of mucus or cosmetic cream in the elution buffer, heating at 60°C for 20min, adjusting the pH to 2.9 and purification with hexane extraction. Linearity was determined with spiked samples and the LLOQ values of 0.0125 and 0.2500mg/mL were determined for allantoin and glycolic acid, respectively. Accuracy and intra- and inter-day repeatability were studied at three levels of concentrations (0.04, 0.08 and 0.16mg/mL for allantoin and 0.1, 1.5 and 4.0mg/mL for glycolic acid) using spiked mucus and cream base samples; mean values of recovery were in the range of 96.81-102.42% in all matrices tested, whereas the respective RSDs (%Relative Standard Deviation) were less than 3.04% in all cases. Spiked mucus and cream samples were stable (RSD<4.16 and relative error<4.34%) at room temperature and at 4°C for 1 week and at -18°C for 6 months; samples were also stable after three freeze-thaw cycles. The method was applied to the analysis of different lots of snail mucus, and of three commercial creams containing snail mucus.

Identification and quantitative determination of atorvastatin calcium polymorph in tablets using FT-Raman spectroscopy.

Atorvastatin calcium (ATC) is the active pharmaceutical ingredient (API) of the best selling lipid-lowering formulation Lipitor. Twelve ATC crystal forms are known and several pharmaceutical companies are developing or have developed generic drug formulations based on different ATC polymorphs. The strong overlap of the X-ray diffraction patterns (XRD) of the polymorphs with the respective patterns of the excipients, the presence of small API quantities in the tablet and the similarity of the crystal phase VIII XRD pattern used in the tablet examined in this work to that of phases IV and IX made identification difficult. Quantitative determination of ATC was attempted using Raman spectroscopy (RS), IR spectroscopy and X-ray powder diffraction. It was found that RS exhibited lower detection limit and a calibration model was constructed. Its application on commercial ATC tablets with 40mg strength yielded an error of 1.25%.

Modal damping for monitoring bone integrity and osteoporosis.

We applied a noninvasive method to assess bone structural integrity. The method is based on the measurement of the dynamic characteristics of the bone (quality factor and modal damping factor) by applying vibration excitation in the range of acoustic frequencies, in the form of an acoustic sweep signal. Excised sheep femora were tested to detect changes in modal damping, density (kg/m3), bone mineral density (kg/m2) and bone mineral (hydroxyapatite) percentage. The changes were recorded after each time of chemical treatment of the bones performed to gradually cause mineral removal, thus simulating osteoporosis. It was shown that the change in quality factor and damping was in all cases on average equal or greater to the change in all other measured characteristics, thus strengthening the potential of the proposed method to become a valuable assessment tool for monitoring bone integrity and osteoporosis.

Arsonoliposomes, a novel class of arsenic-containing liposomes: effect of palmitoyl-arsonolipid-containing liposomes on the viability of cancer and normal cells in culture.

PURPOSE: Arsonolipid-containing liposomes have been recently prepared. The demonstrated antileukemic action of arsenic trioxide prompted us to study their effect on the viability of several types of cancer cells to investigate the possibility of relevant applications. Five different cell types, three malignant (HL-60, C6. and GH3) and two non-malignant (HUVEC and RAME), were used. METHODS: Liposomes containing the palmitoyl side chain arsonolipid (with different lipid compositions) were incubated with a given number of cells. Cell viability was estimated by the 3-(4,5-dimethylthiazol-2-yl)-2,5-dimethyltetrazolium bromide assay. Morphologic studies were also performed. RESULTS: Our results reveal that arsonoliposomes cause a dose (initiated at 10(-6) M)- and time-dependent inhibition of survival in all three malignant cell lines studied. No significant effect on the survival of the normal cells studied was observed at these, as well as at 10-fold higher. concentrations, although arsenic trioxide was toxic to HUVEC cells at equivalent arsenic concentrations. Microscopy studies reveal that although morphologic changes were initiated in HL-60 and C6 cells after incubation with arsonoliposomes, no changes in HUVEC and RAME cells were observed. CONCLUSIONS: Considering the numerous advantages of liposomal systems in therapeutics, it is concluded that the arsonoliposome system is very interesting and future applications should be exploited by further studies.