Time-resolved spectroscopic investigation for the practical application of a photocatalytic air purifier.

The photocatalytic efficiency for removing volatile organic compounds (VOCs) is significantly influenced by operational parameters like humidity and flow velocity, exhibiting notable and inconsistent fluctuations in both lab-scale and large-scale demonstrations. In this study, operando spectroscopy and isotope analysis were employed to investigate the correlation between humidity levels and degradation of gaseous acetaldehyde using TiO2 photocatalysts, aiming to demonstrate the scaling-up of photocatalytic air purifier. It was observed that rate constants for the mineralization of acetaldehyde rapidly decreased by 30% as relative humidity increased from 25% to 80% in the flow system (with an air velocity, v = 0.78 m/s). However, batch system showed smaller change with only a 10% reduction of the rate constant. Humidity fluctuations were more pronounced under high-speed conditions and were amplified in air purifier (v = 3.8 m/s). Time-resolved operando spectroscopy using an 13C isotope of acetaldehyde revealed that humidity's distinct role in dark adsorption and photocatalytic reactions. Water was found to inhibit the formation of crotonaldehyde during aldol condensation reaction in dark condition. Moreover, water suppressed photocatalytic mineralization by inhibiting acetate oxidation to formate. These findings provide valuable insights for improving realistic air purification processes, underscoring the importance of identifying key intermediates and controlling humidity to enhance the selectivity of gaseous pollutant oxidation reactions.

A Graphene-Based Polymer-Dispersed Liquid Crystal Device Enabled through a Water-Induced Interface Cleaning Process.

We report the use of four-layer graphene (4LG) as a highly reliable transparent conductive electrode (TCE) for polymer-dispersed liquid crystal (PDLC)-based smart window devices. The adhesion between 4LG and the substrate was successfully improved through a water-induced interface-cleaning (WIIC) process. We compared the performance of a device with a WIIC-processed 4LG electrode with that of devices with a conventional indium tin oxide (ITO) electrode and a 4LG electrode without a WIIC. With the application of the WIIC process, the PDLC smart window with a 4LG electrode exhibited reduced turn-on voltage and haze compared to 4LG without the WIIC process and characteristics comparable to those of the ITO electrode. The WIIC-processed 4LG electrode demonstrated enhanced electrical properties and better optical performance, leading to improved device efficiency and reliability. Furthermore, our study revealed that the WIIC process not only improved the adhesion between 4LG and the substrate but also enhanced the compatibility and interfacial interactions, resulting in the superior performance of the smart window device. These findings suggest that 4LG with WIIC holds great promise as a transparent conductive electrode for flexible smart windows, offering a cost-effective and efficient alternative to conventional ITO electrodes.

National trends in alcohol and substance use among adolescents from 2005 to 2021: a Korean serial cross-sectional study of one million adolescents.

BACKGROUND: Although previous studies have provided data on early pandemic periods of alcohol and substance use in adolescents, more adequate studies are needed to predict the trends of alcohol and substance use during recent periods, including the mid-pandemic period. This study investigated the changes in alcohol and substance use, except tobacco use, throughout the pre-, early-, and mid-pandemic periods in adolescents using a nationwide serial cross-sectional survey from South Korea. METHODS: Data on 1,109,776 Korean adolescents aged 13-18 years from 2005 to 2021 were obtained in a survey operated by the Korea Disease Control and Prevention Agency. We evaluated adolescents' alcohol and substance consumption prevalence and compared the slope of alcohol and substance prevalence before and during the COVID-19 pandemic to see the trend changes. We define the pre-COVID-19 period as consisting of four groups of consecutive years (2005-2008, 2009-2012, 2013-2015, and 2016-2019). The COVID-19 pandemic period is composed of 2020 (early-pandemic era) and 2021 (mid-pandemic era). RESULTS: More than a million adolescents successfully met the inclusion criteria. The weighted prevalence of current alcohol use was 26.8% [95% confidence interval (CI) 26.4-27.1] from 2005 to 2008 and 10.5% (95% CI 10.1-11.0) in 2020 and 2021. The weighted prevalence of substance use was 1.1% (95% CI 1.1-1.2) from 2005 to 2008 and 0.7% (95% CI 0.6-0.7) between 2020 and 2021. From 2005 to 2021, the overall trend of use of both alcohol and drugs was found to decrease, but the decline has slowed since COVID-19 epidemic (current alcohol use: ßdiff 0.167; 95% CI 0.150-0.184; substance use: ßdiff 0.152; 95% CI 0.110-0.194). The changes in the slope of current alcohol and substance use showed a consistent slowdown with regard to sex, grade, residence area, and smoking status from 2005 to 2021. CONCLUSION: The overall prevalence of alcohol consumption and substance use among over one million Korean adolescents from the early and mid-stage (2020-2021) of the COVID-19 pandemic showed a slower decline than expected given the increase during the prepandemic period (2005-2019).

Long-lifetime water-washable ceramic catalyst filter for air purification.

Particulate matter (PM) and volatile organic compounds (VOCs) are recognised as hazardous air pollutants threatening human health. Disposable filters are generally used for air purification despite frequent replacement and waste generation problems. However, the development of a novel regenerable and robust filter for long-term use is a huge challenge. Here, we report on a new class of facile water-washing regenerable ceramic catalyst filters (CCFs), developed to simultaneously remove PM (>95%) and VOCs (>82%) in single-pass and maximized space efficiency by coating the inner and outer filter channels with an inorganic membrane and a Cu2O/TiO2 photocatalyst, respectively. The CCFs reveal four-fold increase in the maximum dust loading capacity (approximately 20 g/L) in relation to conventional filters (5 g/L), and can be reused after ten regeneration capability with simple water washing retaining initial PM and VOC removal performances. Thus, the CCFs can be well-suited for indoor and outdoor air purification for 20 years, which shows a huge increase in lifetime compared to the 6-month lifespan of conventional filters. Finally, we believe that the development and implementation of CCFs for air purification can open new avenues for sustainable technology through renewability and zero-waste generation.

Estimated prevalence and trends in smoking among adolescents in South Korea, 2005-2021: a nationwide serial study.

BACKGROUND: Although smoking is classified as a risk factor for severe COVID-19 outcomes, there is a scarcity of studies on prevalence of smoking during the COVID-19 pandemic. Thus, this study aims to analyze the trends of prevalence of smoking in adolescents over the COVID-19 pandemic period. METHODS: The present study used data from middle to high school adolescents between 2005 and 2021 who participated in the Korea Youth Risk Behavior Web-based Survey (KYRBS). We evaluated the smoking prevalence (ever or daily) by year groups and estimated the slope in smoking prevalence before and during the pandemic. RESULTS: A total of 1,137,823 adolescents participated in the study [mean age, 15.04 years [95% confidence interval (CI) 15.03-15.06]; and male, 52.4% (95% CI 51.7-53.1)]. The prevalence of ever smokers was 27.7% (95% CI 27.3-28.1) between 2005 and 2008 but decreased to 9.8% (95% CI 9.3-10.3) in 2021. A consistent trend was found in daily smokers, as the estimates decreased from 5.4% (95% CI 5.2-5.6) between 2005 and 2008 to 2.3% (95% CI 2.1-2.5) in 2021. However, the downward slope in the overall prevalence of ever smokers and daily smokers became less pronounced in the COVID-19 pandemic period than in the pre-pandemic period. In the subgroup with substance use, the decreasing slope in daily smokers was significantly more pronounced during the pandemic than during the pre-pandemic period. CONCLUSIONS: The proportion of ever smokers and daily smokers showed a less pronounced decreasing trend during the pandemic. The findings of our study provide an overall understanding of the pandemic's impact on smoking prevalence in adolescents. Supplementary file2 (MP4 64897 KB).

National trends in physical activity among adolescents in South Korea before and during the COVID-19 pandemic, 2009-2021.

With the ongoing COVID-19 pandemic, several previous studies from different countries showed that physical activity (PA) decreased during the COVID-19 outbreak. However, few studies have examined the recent tendency of PA in the adolescent population. Thus, we aimed to investigate the long-term trend of PA in Korean youth and the prevalence changes between before and during the COVID-19 pandemic. Data from Korea Youth Risk Behavior Web-Based Survey (KYRBS) was collected for consecutive years between 2009 and 2021. The period was separated into prepandemic (2009-2019), early-pandemic (2020), and mid-pandemic (2021). Self-reported amount of PA was categorized into four groups (insufficient, aerobic, muscle strengthening, and both physical activities) according to World Health Organization (WHO) PA guidelines. A total of 840 488 adolescents aged 12-18 who fully responded to the survey were selected (response rate: 95.2%). The 13-year trends in the proportion of adolescents who reported aerobic and muscle-strengthening activities met or exceeded 2020 WHO exercise guidelines for adolescents plateaued (11.9% from 2009 to 2011, 14.2% from 2018 to 2019, 14.4% from 2020, and 14.0% from 2021); however, the slope decreased during the pandemic (ßdiff , -0.076; 95% confidence interval [CI], -0.123 to -0.029). Proportion of sufficient aerobic exercise among adolescents sharply decreased midst the pandemic (28.0% from 2009 to 2011, 29.4% from 2018 to 2019, and 23.8% from 2020; ßdiff , -0.266; 95% CI, -0.306 to -0.226) but increased again in 2021 (26.0% from mid-COVID 19; 95% CI, 25.4-26.7). Similar patterns were observed in Metabolic Equivalent Task (MET) score (MET-min/week; 804.1 from 2018 to 2019, 720.9 from 2020, and 779.6 from 2021). The mean difference in MET score between pre-COVID and post-COVID was -55.4 MET-min/week (95% CI, -70.5 to -40.3). Through a nationwide representative study, there was no significant difference with regard to the number of Korean adolescents who achieved the PA guidelines (pre and postpandemic); however, the prevalence of recommended levels of PA needs to increase more based on the trend before the COVID-19 outbreak. The findings of this study suggest reinforcement of the importance of public health policies for Korean youths to be more physically active, especially during and after the pandemic.

Effect of Nano Ceramic Coating on Color Perceptibility and Acceptability of Polymethylmethacrylate: In Vitro and Clinical Study.

The effect of a novel nano-ceramic coating (TiO2) using an atomic layer deposition (ALD) technique on the surface of polymethyl methacrylate (PMMA) material was investigated. The patients' and clinicians' perception and acceptance of the PMMA color with TiO2 coating were also examined. In vitro color measurement was performed on thirty specimens (light, original, and dark pink) before and after TiO2 coating. Patients' and clinicians' perception and acceptance of color changes on PMMA were measured and compared. Descriptive and analytic statistics were analyzed (a = 0.05). TiO2 films were successfully deposited on the PMMA specimen by the ALD technique. Color changes after TiO2 coating were observed on all three PMMA shades, significantly higher than the established 50:50% perceptibility threshold, but below the established 50:50% acceptability threshold. The percentage of patients that perceived a color difference after TiO2 coating were 83.3%, 63.9%, and 77.8% for light, original, and dark pink, respectively. The percentages of clinicians that were satisfied with the color difference were 96.4%, 80%, and 69.2% for light, original, and dark pink, respectively. Color changes after TiO2 coating were observed, but below the acceptable threshold. The clinical survey demonstrated that a color difference was perceived but was clinically acceptable. In general, laypeople have lower perception and higher acceptance of changes in PMMA color than clinicians.

The Joule Heating Effect of a Foldable and Cuttable Sheet Made of SWCNT/ANF Composite.

A foldable and cuttable sheet heater was fabricated using single-walled carbon nanotubes (SWCNTs) and aramid nanofibers (ANFs). SWCNTs are particularly well suited for Joule heating based on their high thermal stability, electrical properties, high current density, and aspect ratio. When the SWCNT/ANF composite reaches a high temperature during Joule heating, ANFs will endure this temperature due to their impressive thermal stability, derived from aramid fibers. With the aim of achieving a synergistic effect between the SWCNTs and ANFs, 0-100 wt% SWCNT/ANF composite sheets were fabricated by tip-type sonication and vacuum filtration. After assessing the thermal stability and electrical properties of the composite sheets, the Joule heating effect was analyzed. TGA showed that our sheet had high thermal stability in an air condition up to around 500 °C. The electrical conductivity of the composite sheet was improved as the amount of SWCNT added rose to 790.0 and 747.5 S/cm in the 75 and 100_SWCNTs/ANF, respectively. The maximum heating temperature, up to 280 °C, reached by Joule heating was measured as a function of SWCNT content and input voltage, and the relationship among SWCNT content, input voltage, heating temperature, and electric power was described. Mechanical properties were also measured in a temperature range similar to the heating temperature of 300 °C reached by Joule heating. Ultimately, we obtained a foldable and cuttable composite sheet with a stretchable structure, capable of being molded into a variety of shapes. This energy-efficient material can potentially be employed in any device in which a heater is required to deliver high temperatures.

Preconditioning process for dermal tissue decellularization using electroporation with sonication.

Decellularization to produce bioscaffolds composed of the extracellular matrix (ECM) uses enzymatic, chemical and physical methods to remove antigens and cellular components from tissues. Effective decellularization methods depend on the characteristics of tissues, and in particular, tissues with dense, complex structure and abundant lipid content are difficult to completely decellularize. Our study enables future research on the development of methods and treatments for fabricating bioscaffolds via decellularization of complex and rigid skin tissues, which are not commonly considered for decellularization to date as their structural and functional characteristics could not be preserved after severe decellularization. In this study, decellularization of human dermal tissue was done by a combination of both chemical (0.05% trypsin-EDTA, 2% SDS and 1% Triton X-100) and physical methods (electroporation and sonication). After decellularization, the content of DNA remaining in the tissue was quantitatively confirmed, and the structural change of the tissue and the retention and distribution of ECM components were evaluated through histological and histochemical analysis, respectively. Conditions of the chemical pretreatment that increase the efficiency of physical stimulation as well as decellularization, and conditions for electroporation and sonication without the use of detergents, unlike the methods performed in previous studies, were established to enable the complete decellularization of the skin tissue. The combinatorial decellularization treatment formed micropores in the lipid bilayers of the skin tissues while removing all cell and cellular residues without affecting the ECM properties. Therefore, this procedure can be widely used to fabricate bioscaffolds by decellularizing biological tissues with dense and complex structures.

Effect of Pelvic Floor Muscle Training Using Pressure Biofeedback on Pelvic Floor Muscle Contraction and Trunk Muscle Activity in Sitting in Healthy Women.

Pelvic floor muscle training (PFMT) has been recommended as the first choice as one of the effective methods for preventing and improving urinary incontinence (UI). We aimed to determine whether pressure biofeedback unit training (PBUT) improves short term and retention performance of pelvic floor muscle contraction. The muscle activities of the external oblique (EO), transversus/internal oblique (TrA/IO), multifidus (MF) and the bladder base displacement were measured in the verbal feedback group (n = 10) and PBU group (n = 10) three times (baseline, post-training, and at the 1-week follow-up). Surface electromyographic activity was recorded from the EO, TrA/IO, and MF muscles. The bladder base displacement was measured using ultrasound. The results were analyzed using two way mixed ANOVA. The bladder base displacement may have elevated more in the PBU group than in the verbal feedback group due to decreased TrA/IO activity. These findings indicate that PBUT is a better method than verbal feedback training.

Halide Perovskite Nanocrystal-Enabled Stabilization of Transition Metal Dichalcogenide Nanosheets.

Transition metal dichalcogenide (TMD) nanosheets exfoliated in the liquid phase are of significant interest owing to their potential for scalable and flexible photoelectronic applications. Although various dispersants such as surfactants, oligomers, and polymers are used to obtain highly exfoliated TMD nanosheets, most of them are electrically insulating and need to be removed; otherwise, the photoelectric properties of the TMD nanosheets degrade. Here, inorganic halide perovskite nanocrystals (NCs) of CsPbX3  (X = Cl, Br, or I) are presented as non-destructive dispersants capable of dispersing TMD nanosheets in the liquid phase and enhancing the photodetection properties of the nanosheets, thus eliminating the need to remove the dispersant. MoSe2 nanosheets dispersed in the liquid phase are adsorbed with CsPbCl3  NCs. The CsPbCl3 nanocrystals on MoSe2 efficiently withdraw electrons from the nanosheets, and suppress the dark current of the MoSe2 nanosheets, leading to flexible near-infrared MoSe2  photodetectors with a high ON/OFF photocurrent ratio and detectivity. Moreover, lanthanide ion-doped CsPbCl3  NCs enhance the ON/OFF current ratio to >106 . Meanwhile, the dispersion stability of the MoSe2  nanosheets exfoliated with the perovskite NCs is sufficiently high.

Risk of Diabetes in Patients with Long-Standing Graves' Disease: A Longitudinal Study.

BACKGROUND: The detrimental effects of excessive thyroid hormone on glucose metabolism have been widely investigated. However, the risk of diabetes in patients with long-standing hyperthyroidism, especially according to treatment modality, remains uncertain, with few longitudinal studies. METHODS: The risk of diabetes in patients with Graves' disease treated with antithyroid drugs (ATDs) for longer than the conventional duration (≥2 years) was compared with that in age-and sex-matched controls. The risk was further compared according to subsequent treatment modalities after a 24-month course of ATD: continuation of ATD (ATD group) vs. radioactive iodine ablation (RIA) group. RESULTS: A total of 4,593 patients were included. Diabetes was diagnosed in 751 (16.3%) patients over a follow-up of 7.3 years. The hazard ratio (HR) for diabetes, after adjusting for various known risk factors, was 1.18 (95% confidence interval [CI], 1.10 to 1.28) in patients with hyperthyroidism. Among the treatment modality groups, the RIA group (n=102) had a higher risk of diabetes than the ATD group (n=4,491) with HR of 1.56 (95% CI, 1.01 to 2.42). Further, the risk of diabetes increased with an increase in the ATD treatment duration (P for trend=0.019). CONCLUSION: The risk of diabetes was significantly higher in patients with long-standing Graves' disease than in the general population, especially in patients who underwent RIA and prolonged ATD treatment. Special attention to hyperglycemia during follow-up along with effective control of hyperthyroidism may be necessary to reduce the risk of diabetes in these patients.

Pulsed Electrical Stimulation Enhances Consistency of Directional Migration of Adipose-Derived Stem Cells.

Electrical stimulation is a well-known strategy for regulating cell behavior, both in pathological and physiological processes such as wound healing, tissue regeneration, and embryonic development. Electrotaxis is the directional migration of cells toward the cathode or anode when subjected to electrical stimulation. In this study, we investigated the conditions for enhanced directional migration of electrically stimulated adipose-derived stem cells (ADSCs) during prolonged culture, using a customized agar-salt electrotaxis chamber. Exposure of ADSCs to a 1200 µA electric current for 3 h, followed by cessation of stimulation for 6 h and resumed stimulation for a further 3 h, increased directional cell migration toward the anode without inducing cell death. Moreover, Golgi polarization maintained the direction of polarity parallel to the direction of cell movement. Herein, we demonstrated that a pulsed electric current is sufficient to trigger directional migration of ADSCs in long-term culture while maintaining cell viability.

A collagen-AS/εPLL bilayered artificial substitute regulates anti-inflammation and infection for initial inflamed wound healing.

Despite the development of advanced tissue engineering substitutes, inflammation is still a significant problem that can arise from inflamed burn injuries, chronic wounds, or microbial diseases. Although topical wound dressing accelerates healing by minimizing or preventing the consequences of skin inflammation, there remains a need for the development of a novel substitute scaffold that can effectively eliminate immoderate inflammation and infection in the initial phase of the healing meachanism. In this study, an artificial skin substitute scaffold fabricated with asiaticoside (AS) and epsilon-poly-L-lysine (εPLL) was prepared. Upon the release of these bioactive compounds, they accelerate wound healing and inhibit any bacterial infection at the wound site. We determined whether AS and εPLL exhibit anti-inflammatory and bactericidal effects through different mechanisms. Collectively, the collagen-AS/εPLL artificial skin substitute could be a significant therapeutic agent for scar-less rapid wound healing (without infection and inflammation) of initially-inflamed full-thickness wounds.

Sterilization of sealed PVDF pouches containing decellularized scaffold by electrical stimulation.

A terminal sterilization process for tissue engineering products, such as allografts and biomaterials is necessary to ensure complete removal of pathogenic microorganisms such as the bacteria, fungi, and viruses. However, it can be difficult to sterilize allografts and artificial tissue models packaged in wet conditions without deformation. In this study, we investigated the sterilization effects of electrical stimulation (ES) and assessed its suitability by evaluating sterility assurance levels in pouches at a constant current. Stability of polyvinylidene fluoride pouches was determined by a sterility test performed after exposure to five microorganisms (Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans) for 5 days; the sterility test was also performed with decellularized human dermal tissues inoculated with the five microorganisms. Sterilization using ES inactivated microorganisms both inside and outside of sealed pouches and caused no damage to the packaged tissue. Our results support the development of a novel system that involves ES sterilization for packaging of implantable biomaterials and human derived materials.

Muscle insulin-like growth factor-I modulates murine craniofacial bone growth.

Insulin-like growth factor I (IGF-I) is essential for muscle and bone development and a primary mediator of growth hormone (GH) actions. While studies have elucidated the importance of IGF-I specifically in muscle or bone development, few studies to date have evaluated the relationship between muscle and bone modulated by IGF-I in vivo, during post-natal growth. Mice with muscle-specific IGF-I overexpression (mIgf1+/+) were utilised to determine IGF-I- and muscle-mass-dependent effects on craniofacial skeleton development during post-natal growth. mIgf1+/+ mice displayed accelerated craniofacial bone growth when compared to wild-type animals. Virus-mediated expression of IGF-I targeting the masseter was performed to determine if post-natal modulation of IGF-I altered mandibular structures. Increased IGF-I in the masseter affected the mandibular base plane angle in a lateral manner, increasing the width of the mandible. At the cellular level, increased muscle IGF-I also accelerated cartilage thickness in the mandibular condyle. Importantly, mandibular length changes associated with increased IGF-I were not present in mice with genetic inhibition of muscle IGF-I receptor activity. These results demonstrated that muscle IGF-I could indirectly affect craniofacial growth through IGF-I-dependent increases in muscle hypertrophy. These findings have clinical implications when considering IGF-I as a therapeutic strategy for craniofacial disorders.

A Suggested Vacuum Bagging Process for the Fabrication of Single-Walled Carbon Nanotube/Epoxy Composites That Maximize Electromagnetic Interference Shielding Effectiveness.

We designed and tested a manufacturing process that resulted in the formation of composites with maximized electrical conductivity and optimized electromagnetic interference (EMI) shielding effectiveness (SE) properties. Single-walled carbon nanotube (SWCNT) paper, which is a microscopic aggregate of van der Waals force interaction, was impregnated with semi-cured epoxy to make SWCNT prepregs. These prepregs were completely cured into SWCNT/epoxy composites. Fabricating and curing processes were executed under proper temperature cycle depending on the time. We inspected SWCNT paper and the interfacial state between the SWCNTs and epoxy in the composite with a field emission-scanning electron microscopy and calculated the SWCNT weight fraction through thermogravimetric analysis measurements. Using these observations, electrical conductivity and EMI SE were investigated according to thickness which could be controlled by the suggested manufacturing process as 1-, 5- and 10-layer composites. Finally, we determined ideal composite thickness and the associated number of prepreg layers using skin depth theory.

An effective method to generate controllable levels of ROS for the enhancement of HUVEC proliferation using a chlorin e6-immobilized PET film as a photo-functional biomaterial.

Reactive oxygen species (ROS) are byproducts of cellular metabolism; they play a significant role as secondary messengers in cell signaling. In cells, high concentrations of ROS induce apoptosis, senescence, and contact inhibition, while low concentrations of ROS result in angiogenesis, proliferation, and cytoskeleton remodeling. Thus, controlling ROS generation is an important factor in cell biology. We designed a chlorin e6 (Ce6)-immobilized polyethylene terephthalate (PET) film (Ce6-PET) to produce extracellular ROS under red-light irradiation. The application of Ce6-PET films can regulate the generation of ROS by altering the intensity of light-emitting diode sources. We confirmed that the Ce6-PET film could effectively promote cell growth under irradiation at 500 µW/cm2 for 30 min in human umbilical vein endothelial cells. We also found that the Ce6-PET film is more efficient in generating ROS than a Ce6-incorporated polyurethane film under the same conditions. Ce6-PET fabrication shows promise for improving the localized delivery of extracellular ROS and regulating ROS formation through the optimization of irradiation intensity.