Use of iron oxide nanoparticles for immobilizing phosphorus in-situ: Increase in soil reactive surface area and effect on soluble phosphorus.

Phosphorus (P) immobilization has potential for reducing diffuse P losses from legacy P soils to surface waters and for regenerating low-nutrient ecosystems with a high plant species richness. Here, P immobilization with iron oxide sludge application was investigated in a field trial on a noncalcareous sandy soil. The sludge applied is a water treatment residual produced from raw groundwater by Fe(II) oxidation. Siliceous ferrihydrite (Fh) is the major Fe oxide type in the sludge. The reactive surface area assessed with an adapted probe ion method is 211-304 m2 g-1 for the Fe oxides in the sludge, equivalent to a spherical particle diameter of ~6-8 nm. This size is much larger than the primary Fh particle size (~2 nm) observed with transmission electron microscopy. This can be attributed to aggregation initiated by silicate adsorption. The surface area of the indigenous metal oxide particles in the field trial soils is much higher (~1100 m2 g-1), pointing to the presence of ultra-small oxide particles (2.3 ± 0.4 nm). The initial soil surface area was 5.4 m2 g-1 and increased linearly with sludge application up to a maximum of 12.9 m2 g-1 when 27 g Fe oxides per kg soil was added. In case of a lower addition (~10-15 g Fe oxides per kg soil), a 10-fold reduction in the phosphate (P-PO4) concentration in 0.01 M CaCl2 soil extracts to 0.3 µM was possible. The adapted probe ion method is a valuable tool for quantifying changes in the soil surface area when amending soil with Fe oxide-containing materials. This information is important for mechanistically predicting the reduction in the P-PO4 solubility when such materials are used for immobilizing P in legacy P soils with a low P-PO4 adsorption capacity but with a high surface loading.

Asymmetric flow field-flow fractionation of manufactured silver nanoparticles spiked into soil solution.

Manufactured metallic silver nanoparticles (AgNP) are intensively utilized in consumer products and this will inevitably lead to their release to soils. To assess the environmental risks of AgNP in soils, quantification of both their concentration and size in soil solution is essential. We developed a methodology consisting of asymmetric flow field-flow fractionation (AF4) in combination with on-line detection by UV-vis spectroscopy and off-line HR-ICP-MS measurements to quantify the concentration and size of AgNP, coated with either citrate or polyvinylpyrrolidone (PVP), in water extracts of three different soils. The type of mobile phase was a critical factor in the fractionation of AgNP by AF4. In synthetic systems, fractionation of a series of virgin citrate- and PVP-coated AgNP (10-90 nm) with reasonably high recoveries could only be achieved with ultrahigh purity water as a mobile phase. For the soil water extracts, 0.01% (w:v) sodium dodecyl sulfate (SDS) at pH 8 was the key to a successful fractionation of the AgNP. With SDS, the primary size of AgNP in all soil water extracts could be determined by AF4, except for PVP-coated AgNP when clay colloids were present. The PVP-coated AgNP interacted with colloidal clay minerals, leading to an overestimation of their primary size. Similar interactions between PVP-coated AgNP and clay colloids can take place in the environment and facilitate their transport in soils, aquifers, and surface waters. In conclusion, AF4 in combination with UV-vis spectroscopy and HR-ICP-MS measurements is a powerful tool to characterize AgNP in soil solution if the appropriate mobile phase is used.

Impact of model uncertainty on soil quality standards for cadmium in rice paddy fields.

At present, soil quality standards used for agriculture do not consider the influence of pH and CEC on the uptake of pollutants by crops. A database with 750 selected paired samples of cadmium (Cd) in soil and paddy rice was used to calibrate soil to plant transfer models using the soil metal content, pH, and CEC or soil Cd and Zn extracted by 0.01 M CaCl2 as explanatory variables. The models were validated against a set of 2300 data points not used in the calibration. These models were then used inversely to derive soil quality standards for Japonica and Indica rice cultivars based on the food quality standards for rice. To account for model uncertainty, strict soil quality standards were derived considering a maximum probability that rice exceeds the food quality standard equal to 10 or 5%. Model derived soil standards based on Aqua Regia ranged from less than 0.3 mg kg⁻¹ for Indica at pH 4.5 to more than 6 mg kg⁻¹ for Japonica-type cultivars in clay soils at pH 7. Based on the CaCl2 extract, standards ranged from 0.03 mg kg⁻¹ Cd for Indica cultivars to 0.1 mg kg⁻¹ Cd for Japonica cultivars. For both Japonica and Indica-type cultivars, the soil quality standards must be reduced by a factor of 2 to 3 to obtain the strict standards. The strong impact of pH and CEC on soil quality standards implies that it is essential to correct for soil type when deriving national or local standards. Validation on the remaining 2300 samples indicated that both types of models were able to accurately predict (> 92%) whether rice grown on a specific soil will meet the food quality standard used in Taiwan.

Prediction of Cadmium uptake by brown rice and derivation of soil-plant transfer models to improve soil protection guidelines.

Cadmium (Cd) levels in paddy fields across Taiwan have increased due to emission from industry. To ensure the production of rice that meets food quality standards, predictive models or suitable soil tests are needed to evaluate the quality of soils to be used for rice cropping. Levels of Cd in soil and rice grains were measured in 19 paddy fields across the western plains in Taiwan. Cadmium levels in soil range from less than 0.1 mg kg(-1) to 30 mg kg(-1). Measured Cd levels in brown rice were predicted very well (R(2) > 0.8) based on Cd and Zinc in a 0.01 M CaCl(2) extract or a soil-plant transfer model using the reactive soil Cd content, pH, and cation exchange capacity. In contrast to current soil quality standards used in Taiwan, such models are effective in identifying soils where Cd in rice will exceed food quality standards.

Feasibility of phytoextraction to remediate cadmium and zinc contaminated soils.

A Cd and Zn contaminated soil was mixed and equilibrated with an uncontaminated, but otherwise similar soil to establish a gradient in soil contamination levels. Growth of Thlaspi caerulescens (Ganges ecotype) significantly decreased the metal concentrations in soil solution. Plant uptake of Cd and Zn exceeded the decrease of the soluble metal concentrations by several orders of magnitude. Hence, desorption of metals must have occurred to maintain the soil solution concentrations. A coupled regression model was developed to describe the transfer of metals from soil to solution and plant shoots. This model was applied to estimate the phytoextraction duration required to decrease the soil Cd concentration from 10 to 0.5 mg kg(-1). A biomass production of 1 and 5 t dm ha(-1) yr(-1) yields a duration of 42 and 11 yr, respectively. Successful phytoextraction operations based on T. caerulescens require an increased biomass production.

Phosphorus movement and speciation in a sandy soil profile after long-term animal manure applications.

Long-term application of phosphorus (P) with animal manure in amounts exceeding removal with crops leads to buildup of P in soil and to increasing risk of P loss to surface water and eutrophication. In most manures, the majority of P is held within inorganic forms, but in soil leachates organic P forms often dominate. We investigated the mobility of both inorganic and organic P in profile samples from a noncalcareous sandy soil treated for 11 yr with excessive amounts of pig slurry, poultry manure, or poultry manure mixed with litter. Solution 31P nuclear magnetic resonance spectroscopy was used to characterize NaOH-EDTA-extractable forms of P, corresponding to 64 to 93% of the total P concentration in soil. Orthophosphate and orthophosphate monoesters were the main P forms detected in the NaOH-EDTA extracts. A strong accumulation of orthophosphate monoesters was found in the upper layers of the manure-treated soils. For orthophosphate, however, increased concentrations were found down to the 40- to 50-cm soil layers, indicating a strong downward movement of this P form. This was ascribed to the strong retention of orthophosphate monoesters by the solid phase of the soil, preventing orthophosphate sorption and facilitating downward movement of orthophosphate. Alternatively, mineralization of organic P in the upper layers of the manure-treated soils may have generated orthophosphate, which could have contributed to the downward movement of the latter. Leaching of inorganic P should thus be considered for the assessment and the future management of the long-term risk of P loss from soils receiving large amounts of manure.

A feasibility test to estimate the duration of phytoextraction of heavy metals from polluted soils.

The practical applicability of heavy metal (HM) phytoextraction depends heavily on its duration. Phytoextraction duration is the main cost factorfor phytoextraction, both referring to recurring economic costs during phytoextraction and to the cost of the soil having no economic value during phytoextraction. An experiment is described here, which is meant as a preliminary feasibility test before starting a phytoextraction scheme in practice, to obtain a more realistic estimate of the phytoextraction duration of a specific HM-polluted soil. In the experiment, HM-polluted soil is mixed at different ratios with unpolluted soil of comparable composition to mimic the gradual decrease of the HM content in the target HM-polluted soil during phytoextraction. After equilibrating the soil mixtures, one cropping cycle is carried out with the plant species of interest. At harvest, the adsorbed HM contents in the soil and the HM contents in the plant shoots are determined. The adsorbed HM contents in the soil are then related to the HM contents in the plant shoots by a log-log linear relationship that can then be used to estimate the phytoextraction duration of a specific HM-polluted soil. This article describes and evaluates the merits of such a feasibility experiment. Potential drawbacks regarding the accuracy of the described approach are discussed and a greenhouse-field extrapolation procedure is proposed.

Disturbance of water-extractable phosphorus determination by colloidal particles in a heavy clay soil from the Netherlands.

Water extraction methods are widely used to extract phosphorus (P) from soils for both agronomic and environmental purposes. Both the presence of soil colloids in soil water filtrates, and the contribution of colloidal P to the molybdate-reactive phosphorus (MRP) concentration measured in these filtrates, are well documented. However, relatively little attention has been given to the direct disturbance by colloids of MRP measurement. The objective of this paper is to show this influence found for water extracts with a soil to solution ratio of 1:60 (v/v) (P(w)), obtained from a heavy clay soil in the Netherlands. Colloidal particles, which passed a 0.45-mum filter, caused a large overestimation of MRP. The low ionic strength of the P(w) filtrates (on average 0.64 mmol(c) L(-1)) probably caused soil dispersion and increased detachment of colloids from soil during extraction. After NaCl addition, followed by 0.45-mum filtration, MRP was on average 93% lower. This can be ascribed to flocculation of colloids and removal by filtration. A low ionic strength can thus lead to the direct disturbance by colloidal particles of MRP measurement in waters from soils sensitive to release of colloids.

Phosphorus desorption dynamics in soil and the link to a dynamic concept of bioavailability.

Soils under intensive livestock farming and heavily fertilized with animal manure may have elevated soil phosphorus (P) contents. We determined P desorption kinetics in batch experiments using soils from a pot experiment where grass was cropped on a P-rich noncalcareous sandy soil without P addition, to lower the soil P content. A diffusion model was used to describe P desorption kinetics from a spherical aggregate. The model was calibrated with data from the batch experiments. Simulation results show that in the pot experiment, P desorption from the solid phase of the inner layers was initially far from equilibrium with the rest of the aggregate, but desorption came closer to equilibrium as the soil P content decreased further. A simple tool is presented, referred to as the dynamic bioavailability index (DBI), to determine whether kinetics of P desorption limits plant uptake. This tool is the dimensionless ratio of the modeled maximal diffusive flux from soil aggregates to solution and the plant uptake rate measured in the pot experiment. The DBI was initially much larger than one; the maximal possible P desorption rate exceeded the uptake rate, so uptake was not limited by desorption. The DBI stabilized at a value somewhat larger than one after a while, due to soil transport limitations. This decrease coincided with a large decrease of the P content in the grass to a value (far) below what is considered as optimal; the supply rate of P from soil to the root cannot meet the demand needed for optimal P uptake. The DBI could be seen as a promising onset to a new dynamic approach of bioavailability.

Phosphorus availability for plant uptake in a phosphorus-enriched noncalcareous sandy soil.

Mining soil phosphorus (i.e., harvesting P taken up from the soil by a crop grown without external P addition) has been proposed as a possible management strategy for P-enriched soils to decrease the risk of P leaching. We performed a pot experiment in a greenhouse where grass was cropped on a P-enriched noncalcareous sandy soil at zero P application over a period of 978 d. We determined the long-term availability of soil P and evaluated the effectiveness of mining soil P to decrease P in different pools. There were two treatments: soil layers in the pots of either 5 or 10 cm thickness. Soils were analyzed at various stages of the experiment. Phosphorus in soil solution and the total pool of sorbed P were estimated using 1:10 (w/v) 0.01 M CaCl2 extracts and acid ammonium oxalate (P(ox)), respectively. A desorption isotherm was constructed, which described the relationship between P in soil solution and the total pool of sorbed P for the soils of the 5- and 10-cm treatments. The Langmuir equation gave a very good description of the isotherm. In the long-term, 65% of P(ox) in the initial soil can be removed by plant uptake, as was calculated from the Langmuir equation and a critical P concentration in soil solution at which P uptake can just be maintained. Thus, P(ox) may be largely plant available. From the strong nonlinearity of the desorption isotherm, it can be understood why the relative decrease of the P concentration in the CaCl2 extracts was much larger than the relative decrease of P(ox). Mining soil P decreased the P concentration in soil solution effectively and, therefore, risk of P leaching from our P-enriched soil.

Wet chemical and phosphorus-31 nuclear magnetic resonance analysis of phosphorus speciation in a sandy soil receiving long-term fertilizer or animal manure applications.

In areas under intensive livestock farming and with high application rates of animal manure, inorganic and organic phosphorus (P) may be leached from soils. Since the contribution of these P compounds to P leaching may differ, it is important to determine the speciation of P in these soils. We determined the effect of various fertilization regimes on the P speciation in NaOH-Na2EDTA (ethylenediaminetetraacetic acid) and water extracts of acidic sandy soil samples from the top 5 cm of grassland with wet chemical analysis and 31P nuclear magnetic resonance (NMR) spectroscopy. These soils had been treated for a period of 11 years with no fertilizer (control), N (no P application), N-P-K, or different animal manures. Inorganic P was highly elevated in the NaOH-Na2EDTA extracts of the soils amended with N-P-K or animal manures, while organic P increased only in the soil treated with pig slurry. Water-extractable P showed a similar trend. As indicated by 31P NMR, orthophosphate monoesters were the main organic P compounds in all soils. Our results suggest that long-term applications of large amounts of P fertilizer and animal manures caused an accumulation of inorganic P, resulting in an increase of the potential risk related to mobilization of inorganic P in the top 5 cm of these soils.

Soil phosphorus quantity-intensity relationships to predict increased soil phosphorus loss to overland and subsurface flow.

Soil phosphorus (P) quantity-intensity (q-i) relationships, based on common extraction methods, may potentially be used to estimate the risk of P loss in overland flow and subsurface drainage water. Some workers have used nonlinear q-i relationships to derive thresholds in soil test P (STP; a quantity factor) above which the risk of P loss increases, while others find linear relationships and no threshold. We present here a simple modelling exercise (based on Langmuir adsorption theory) along with data from literature to explain the behaviour of q-i relationships, and to give an explanation for this apparent discrepancy. The data indicate that q-i relationships are dependent upon the soil to solution ratio of the P intensity parameter, adsorption capacity (Qmax) and strength (K) of the soil, and the total range in STP. In turn, this affects the calculation of a threshold in STP. The q-i relationship tends towards linearity under conditions of a narrow total range of STP and/or when using a wide soil to solution ratio for estimating the P intensity parameter. Under such conditions, a threshold is difficult to detect, and uncertain. We conclude that the sensitivity of thresholds to experimental conditions and soils needs to be considered if thresholds are to be successful in environmental management to decrease P loss to surface waters.