Synthesis and Evaluation of a Library of Alternating Amphipathic Copolymers to Solubilize and Study Membrane Proteins.

Amphipathic copolymers such as poly(styrene-maleic acid) (SMA) are promising tools for the facile extraction of membrane proteins (MPs) into native nanodiscs. Here, we designed and synthesized a library of well-defined alternating copolymers of SMA analogues in order to elucidate polymer properties that are important for MP solubilization and stability. MP extraction efficiency was determined using KcsA from E. coli membranes, and general solubilization efficiency was investigated via turbidimetry experiments on membranes of E. coli, yeast mitochondria, and synthetic lipids. Remarkably, halogenation of SMA copolymers dramatically improved solubilization efficiency in all systems, while substituents on the copolymer backbone improved resistance to Ca2+. Relevant polymer properties were found to include hydrophobic balance, size and positioning of substituents, rigidity, and electronic effects. The library thus contributes to the rational design of copolymers for the study of MPs.

Solubilization of artificial mitochondrial membranes by amphiphilic copolymers of different charge.

Certain amphiphilic copolymers form lipid-bilayer nanodiscs from artificial and natural membranes, thereby rendering incorporated membrane proteins optimal for structural analysis. Recent studies have shown that the amphiphilicity of a copolymer strongly determines its solubilization efficiency. This is especially true for highly negatively charged membranes, which experience pronounced Coulombic repulsion with polyanionic polymers. Here, we present a systematic study on the solubilization of artificial multicomponent lipid vesicles that mimic inner mitochondrial membranes, which harbor essential membrane-protein complexes. In particular, we compared the lipid-solubilization efficiencies of established anionic with less densely charged or zwitterionic and even cationic copolymers in low- and high-salt concentrations. The nanodiscs formed under these conditions were characterized by dynamic light scattering and negative-stain electron microscopy, pointing to a bimodal distribution of nanodisc diameters with a considerable fraction of nanodiscs engaging in side-by-side interactions through their polymer rims. Overall, our results show that some recent, zwitterionic copolymers are best suited to solubilize negatively charged membranes at high ionic strengths even at low polymer/lipid ratios.

Mass Photometry of Membrane Proteins.

Integral membrane proteins (IMPs) are biologically highly significant but challenging to study because they require maintaining a cellular lipid-like environment. Here, we explore the application of mass photometry (MP) to IMPs and membrane-mimetic systems at the single-particle level. We apply MP to amphipathic vehicles, such as detergents and amphipols, as well as to lipid and native nanodiscs, characterizing the particle size, sample purity, and heterogeneity. Using methods established for cryogenic electron microscopy, we eliminate detergent background, enabling high-resolution studies of membrane-protein structure and interactions. We find evidence that, when extracted from native membranes using native styrene-maleic acid nanodiscs, the potassium channel KcsA is present as a dimer of tetramers-in contrast to results obtained using detergent purification. Finally, using lipid nanodiscs, we show that MP can help distinguish between functional and non-functional nanodisc assemblies, as well as determine the critical factors for lipid nanodisc formation.

Iterative RAFT-Mediated Copolymerization of Styrene and Maleic Anhydride toward Sequence- and Length-Controlled Copolymers and Their Applications for Solubilizing Lipid Membranes.

The use of poly(styrene-co-maleic acid) (SMA) for the solubilization of lipid membranes and membrane proteins is becoming more widespread, and with this, the need increases to better understand the chemical properties of the copolymer and how these translate into membrane solubilization properties. SMA comes in many different flavors that include the ratio of styrene to maleic acid, comonomer sequence distribution, average chain length, dispersity, and potential chemical modifications. In this work, the synthesis and membrane active properties are described for 2:1 (periodic) SMA copolymers with Mw varying from ∼1.4 to 6 kDa. The copolymers were obtained via an iterative RAFT-mediated radical polymerization. Characterization of these polymers showed that they represent a well-defined series in terms of chain length and overall composition (FMAnh ∼ 0.33), but that there is heterogeneity in comonomer sequence distribution (FMSS ∼ 0.50) and some dispersity in chain length (1.1 < D < 1.6), particularly for the larger copolymers. Investigation of the interaction of these polymers with phosphatidylcholine lipid self-assemblies showed that all copolymers inserted equally effectively into lipid monolayers, independent of the copolymer length. Nonetheless, smaller polymers were more effective at solubilizing lipid bilayers into nanodiscs, possibly because longer polymers are more prone to become intertwined with each other, thereby hampering their solubilization efficiency. Nanodisc sizes were independent of the copolymer length. However, nanodiscs formed with larger copolymers were found to undergo slower lipid exchange, indicating a higher stability. The results highlight the usefulness of having well-defined copolymers for systematic studies.

Factors influencing the solubilization of membrane proteins from Escherichia coli membranes by styrene-maleic acid copolymers.

Styrene-maleic acid (SMA) copolymers are a promising alternative to detergents for the solubilization of membrane proteins. Here we employ Escherichia coli membranes containing KcsA as a model protein to investigate the influence of different environmental conditions on SMA solubilization efficiency. We show that SMA concentration, temperature, incubation time, ionic strength, presence of divalent cations and pH all influence the amount of protein that is extracted by SMA. The observed effects are consistent with observations from lipid-only model membrane systems, with the exception of the effect of pH. Increasing pH from 7 to 9 was found to result in an increase of the solubilization yield of E. coli membranes, whereas in lipid-only model systems it decreased over the same pH range, based on optical density (OD) measurements. Similar opposite pH-dependent effects were observed in OD experiments comparing solubilization of native yeast membranes and yeast lipid-only membranes. We propose a model in which pH-dependent electrostatic interactions affect binding of the polymers to extramembraneous parts of membrane proteins, which in turn affects the availability of polymer for membrane solubilization. This model is supported by the observations that a similar pH-dependence as for SMA is observed for the anionic detergent SDS, but not for the nonionic detergent DDM and that the pH-dependence can be largely overcome by increasing the SMA concentration. The results are useful as guidelines to derive optimal conditions for solubilization of biological membranes by SMA.

A simple and convenient method for the hydrolysis of styrene-maleic anhydride copolymers to styrene-maleic acid copolymers.

Styrene-maleic acid (SMA) copolymers are increasingly gaining attention in the membrane protein field due to their ability to solubilize lipid membranes into discoidal nanoparticles. The copolymers are synthesized as styrene-maleic anhydride (SMAnh), and need to be converted to the free acid form (SMA) before they are capable of solubilizing membranes. This hydrolysis reaction is traditionally performed under rather cumbersome reflux conditions. Here we report an alternative method for the hydrolysis reaction using simple and readily available equipment found in virtually all biochemical laboratories, namely an autoclave. Based on the results we propose an optimum set of standard conditions for the hydrolysis reaction, that should make the method easily accessible to a wide scope of researchers.

Membrane Solubilization by Styrene-Maleic Acid Copolymers: Delineating the Role of Polymer Length.

Styrene-maleic acid (SMA) copolymers have attracted interest in membrane research because they allow the solubilization and purification of membrane-spanning proteins from biological membranes in the form of native-like nanodisks. However, our understanding of the underlying SMA-lipid interactions is hampered by the fact that SMA preparations are very polydisperse. Here, we obtained fractions of the two most commonly used SMA preparations: SMA 2:1 and SMA 3:1 (both with specified Mw ∼10 kD), with different number-average molecular weight (Mn) and styrene content. The fractionation is based on the differential solubility of styrene-maleic anhydride (SMAnh) in hexane and acetone mixtures. SMAnh fractions were hydrolyzed to SMA and added to lipid self-assemblies. It was found that SMA fractions inserted in monolayers and solubilized vesicles to a different extent, with the highest efficiency being observed for low-Mn SMA polymers. Electron microscopy and dynamic light scattering size analyses confirmed the presence of nanodisks independent of the Mn of the SMA polymers forming the belt, and it was shown that the nanodisks all have approximately the same size. However, nanodisks bounded by high-Mn SMA polymers were more stable than those bounded by low-Mn polymers, as indicated by a better retention of the native lipid thermotropic properties and by slower exchange rates of lipids between nanodisks. In conclusion, we here present a simple method to separate SMAnh molecules based on their Mn from commercial SMAnh blends, which allowed us to obtain insights into the importance of SMA length for polymer-lipid interactions.

Synthesis and biological evaluation of negative allosteric modulators of the Kv11.1(hERG) channel.

We synthesized and evaluated a series of compounds for their allosteric modulation at the Kv11.1 (hERG) channel. Most compounds were negative allosteric modulators of [(3)H]dofetilide binding to the channel, in particular 7f, 7h-j and 7p. Compounds 7f and 7p were the most potent negative allosteric modulators amongst all ligands, significantly increasing the dissociation rate of dofetilide in the radioligand kinetic binding assay, while remarkably reducing the affinities of dofetilide and astemizole in a competitive displacement assay. Additionally, both 7f and 7p displayed peculiar displacement characteristics with Hill coefficients significantly distinct from unity as shown by e.g., dofetilide, further indicative of their allosteric effects on dofetilide binding. Our findings in this investigation yielded several promising negative allosteric modulators for future functional and clinical research with respect to their antiarrhythmic propensities, either alone or in combination with known Kv11.1 blockers.