Polyisobutylenes with Controlled Molecular Weight and Chain-End Structure: Synthesis and Actual Applications.

The polymerization of isobutylene allows us to obtain a wide spectrum of polyisobutylenes (PIBs) which differ in their molecular weight characteristics and the chemical structure of chain-end groups. The bulk of the PIBs manufactured worldwide are highly reactive polyisobutylenes (HRPIBs) with -C(Me)=CH2 end-groups and low-molecular weights (Mn < 5 kDa). HRPIBs are feedstocks that are in high demand in the manufacturing of additives for fuels and oils, adhesives, detergents, and other fine chemicals. In addition, HRPIBs and CMe2Cl-terminated PIBs are intensively studied with the aim of finding biomedical applications and for the purpose of developing new materials. Both chain control (molecular weight and dispersity) and chemoselectivity (formation of exo-olefinic or -CMe2Cl groups) should be achieved during polymerization. This review highlights the fundamental issues in the mechanisms of isobutylene polymerization and PIB analysis, examines actual catalytic approaches to PIBs, and describes recent studies on the functionalization and applications of HRPIBs and halogen-terminated PIBs.

Dispersant and Protective Roles of Amphiphilic Poly(ethylene phosphate) Block Copolymers in Polyester/Bone Mineral Composites.

Composites of synthetic bone mineral substitutes (BMS) and biodegradable polyesters are of particular interest for bone surgery and orthopedics. Manufacturing of composite scaffolds commonly uses mixing of the BMS with polymer melts. Melt processing requires a high homogeneity of the mixing, and is complicated by BMS-promoted thermal degradation of polymers. In our work, poly(L-lactide) (PLLA) and poly(ε-caprolactone) (PCL) composites reinforced by commercial ß-tricalcium phosphate (ßTCP) or synthesized carbonated hydroxyapatite with hexagonal and plate-like crystallite shapes (hCAp and pCAp, respectively) were fabricated using injection molding. pCAp-based composites showed advanced mechanical and thermal characteristics, and the best set of mechanical characteristics was observed for the PLLA-based composite containing 25 wt% of pCAp. To achieve compatibility of polyesters and pCAp, reactive block copolymers of PLLA or PCL with poly(tert-butyl ethylene phosphate) (C1 and C2, respectively) were introduced to the composite. The formation of a polyester-b-poly(ethylene phosphoric acid) (PEPA) compatibilizer during composite preparation, followed by chemical binding of PEPA with pCAp, have been proved experimentally. The presence of 5 wt% of the compatibilizer provided deeper homogenization of the composite, resulting in a marked increase in strength and moduli as well as a more pronounced nucleation effect during isothermal crystallization. The use of C1 increased the thermal stability of the PLLA-based composite, containing 25 wt% of pCAp. In view of positive impacts of polyester-b-PEPA on composite homogeneity, mechanical characteristics, and thermal stability, polyester-b-PEPA will find application in the further development of composite materials for bone surgery and orthopedics.

Tandem Synthesis of Ultra-High Molecular Weight Drag Reducing Poly-α-Olefins for Low-Temperature Pipeline Transportation.

Ultra-high molecular weight poly-α-olefins are widely used as drag reducing agents (DRAs) for pipeline transportation of oil and refined petroleum products. The synthesis of polyolefin DRAs is based on low-temperature Ziegler-Natta (ZN) polymerization of higher α-olefins. 1-Hexene based DRAs, the most effective at room temperature, typically lose DR activity at low temperatures. The use of 1-hexene copolymers with C8-C12 linear α-olefins appears to offer a solution to the problem of low-temperature drag reducing. The present work aims to develop two-stage synthesis of polyolefin DRAs that is based on selective oligomerization of ethylene in the presence of efficient chromium/aminodiphosphine catalysts (Cr-PNP), followed by polymerization of the olefin mixtures, formed at oligomerization stage, using efficient titanium-magnesium ZN catalyst. We have shown that oligomerization of ethylene in α-olefin reaction media proceeds faster than in saturated hydrocarbons, providing the formation of 1-hexene, 1-octene, and branched C10 and C12 olefins; the composition and the ratio of the reaction products depended on the nature of PNP ligand. Oligomerizates were used in ZN polymerization 'as is', without additional treatment. Due to branched character of C10+ hydrocarbons, formed during oligomerization of ethylene, resulting polyolefins demonstrate higher low-temperature DR efficiency at low polymer concentrations (~1 ppm) in comparison with benchmark polymers prepared from the mixtures of linear α-olefins and from pure 1-hexene. We assume that faster solubility and more efficient solvation of the polyolefins, prepared using 'tandem' ethylene-based process, represent an advantage of these type polymers over conventional poly(1-hexene) and linear α-olefin-based polymers when used as 'winter' DRAs.