A Rapid Assay to Assess Nitrification Inhibition Using a Panel of Bacterial Strains and Partial Least Squares Modeling.

As a proof of concept, a rapid assay consisting of a cell-based biosensor (CBB) panel of pure bacterial strains, a fluorescent dye, and partial least squares (PLS) modeling was developed to assess the nitrification inhibition potential of industrial wastewater (WW) samples. The current standard method used to assess the nitrification inhibition potential is the specific nitrification rate (SNR) batch test, which requires approximately 4 h to complete under the watch of an experienced operator. In this study, we exposed the CBB panel of seven bacterial strains (nitrifying and non-nitrifying) to 28 different industrial WW samples and then probed both the membrane integrity and cellular activity using a commercially available "live/dead" fluorescent dye. The CBB panel response acts as a surrogate measurement for the performance of nitrification. Of the seven strains, four (Nitrospira, Escherichia coli, Bacillus subtilis, Bacillus cereus) were identified via the modeling technique to be the most significant contributors for predicting the nitrification inhibition potential. The key outcome from this work is that the CBB panel fluorescence data (collected in approximately 10 min) can accurately predict the outcome of an SNR batch test (that takes 4 h) when performed with the same WW samples and has a strong potential to approximate the chemical composition of these WW samples using PLS modeling. Overall, this is a powerful technique that can be used for point-of-use detection of nitrification inhibition.

Partially aerated submerged fixed-film bioreactor for simultaneous removal of carbon and nutrients from high-strength nitrogen wastewaters: effect of aeration rate and C:N:P ratio.

Influence of aeration rate and COD:N:P (C:N:P) ratio on the performance of an upflow partially aerated submerged fixed film (UP/ASFF) bioreactor for simultaneous carbon and nutrient removal from high-strength nitrogen wastewater was investigated during 6 months. Airflow rates at three levels of 1.5, 3, and 4.5 L/min and C:N:P ratios at four levels of 450:300:10, 450:150:10, 450:100:10, and 450:75:10 were selected as the two main input factors. All experiments were performed at constant chemical oxygen demand (COD), phosphorus (P) and hydraulic residence time of 450 mg COD/L, 10 mg PO43- -P/L and 7.3 h, respectively. The results showed when the airflow rate increased from 1.5 to 4.5 L/min, complete COD removal was achieved. At an airflow rate of 4.5 L/min, total nitrogen removal reached a maximum value of 75% for the C:N:P ratio of 450:75:10. A maximum value of 54% for total phosphorus removal, however, was obtained at an airflow rate of 3 L/min for the C:N:P ratio of 450:75:10. Analysis of variance for the obtained data revealed that aeration rate and nitrogen concentration had more impact on phosphorus removal than COD and nitrogen removal. The study demonstrated that the UP/ASFF system has considerable potential for use in simultaneous removal of carbon and nutrients for high-strength nitrogen wastewater.