A bilayer coating as an oxygen-transfer cascade for the electrochemical ambient conversion of methane to oxygenates.

Oxidation of methane at ambient conditions to useful oxygenates at a bilayer-coated electrode is demonstrated. The composition of the coating, a Mn porphyrin mediator layer on top of a N(OH)2/NiOOH one, allows a cascade of oxygen transfer events upon applying a potential. It is shown, using (spectro)electrochemical techniques, density functional theory computations and product analytical methods, that formate and methanol accompanied by CO2 suppression can be observed at a certain potential range. This can lead to further development of similar oxygen/electron transfer cascades for possible use in devices for energy conversion and fuel/product generation.

DFT and Empirical Considerations on Electrocatalytic Water/Carbon Dioxide Reduction by CoTMPyP in Neutral Aqueous Solutions*.

A combined experimental and density functional theory (DFT) investigation was employed in order to examine the mechanism of electrochemical CO2 reduction and H2 formation from water reduction in neutral aqueous solutions. A water soluble cobalt porphyrin, cobalt [5,10,15,20-(tetra-N-methyl-4-pyridyl)porphyrin], (CoTMPyP), was used as catalyst. The possible attachment of different axial ligands as well as their effect on the electrocatalytic cycles were examined. A cobalt porphyrin hydride is a key intermediate which is generated after the initial reduction of the catalyst. The hydride is involved in the formation of H2 and formate and acts as an indirect proton source for the formation of CO in these H+ -starving conditions. The experimental results are in agreement with the computations and give new insights into electrocatalytic mechanisms involving water soluble metalloporphyrins. We conclude that in addition to the porphyrin's structure and metal ion center, the electrolyte surroundings play a key role in dictating the products of CO2 /H2 O reduction.

Enhancement of photoelectrochemical organics degradation and power generation by electrodeposited coatings of g-C3N4 and graphene on TiO2 nanotube arrays.

New g-C3N4 coatings obtained via electropolymerization (EP) of melamine followed by a heat treatment and graphene oxide (GO) coatings based on combining GO sheets via EP of GO phenolic groups are used to improve the performance of photoanodes composed of TiO2 nanotube arrays towards the photoelectrochemical (PEC) oxidation of methanol. This process, as examined in Na2CO3 solution (pH 11.4) for the two types of coatings and serving as a model for the degradation of an organic pollutant, demonstrates enhanced PEC performance as compared to that obtained using electrochemically reduced GO coatings. PEC oxidation currents obtained with 1 M methanol reach saturation at potentials as low as ∼-0.4 V vs. Ag/AgCl, with the highest saturation current density of ∼2.6 mA cm-2 and photon-to-current efficiency of 52% as observed for the new TiO2NTs/g-C3N4 photoanodes. Electrochemical impedance spectroscopy measurements for these photoanodes show a charge transfer resistance one order of magnitude lower than that obtained by the other types of coatings. This indicates an enhanced charge separation ability for the photogenerated electron-hole pairs and faster interfacial charge transfer between the electron donor (methanol) and acceptor (holes). It is also demonstrated that the process of organics degradation can be achieved not only via an applied potential but also in a galvanic photofuelcell with methanol and oxygen serving as the fuel and oxidant, respectively. The power densities achieved with the electrochemically prepared g-C3N4 photoanodes (∼0.5 mW cm-2) are at least one order of magnitude higher than those reported for other TiO2-based systems.

Effect of drying on the biological activities of a red microalgal polysaccharide.

The red microalga Porphyridium sp. produces a polysaccharide exhibiting a variety of biological activities with potential for medical and cosmetic uses. For this reason, it is important that the drying process, which is the end point of production, should not destroy the natural characteristics of the material. The objective of this study was to evaluate the effect of drying at temperatures ranging from 40 to 140 degrees C on the bioactivities of the polysaccharide. Drying the polysaccharide at temperatures above 90 degrees C caused a significant decline in its biological activities (antiviral and anti-cell proliferation) and reduced elasticity, viscosity, and intrinsic viscosity relative to lyophilized polysaccharide and to the starting product. The relationship between molecular weight and intrinsic viscosity indicated that the polysaccharide takes a rigid coil conformation, which stiffens as a result of drying. FTIR analysis revealed that drying caused both significant conformational alterations in the polymer chains and changes in the interaction between the polysaccharide and the glycoprotein to which it is noncovalently associated. Differential scanning calorimetry analysis of the water adsorbed on the charged groups of the polysaccharide showed that drying at higher temperatures increased the bound water content due to dissociation of the polymer chains. Thus, it is recommended that the polysaccharide be dried in a two-step process in which free water is removed by convection and bound freezing water is removed by lyphophilization.

Selective separation of cis-trans geometrical isomers of beta-carotene via CO2 supercritical fluid extraction.

We investigated a novel method for the selective separation of beta-carotene isomers from a freeze-dried powder of the algae Dunaliella bardawil using supercritical fluid extraction. The separation method relies on the different dissolution rate of the 9Z and all-E isomers of beta-carotene in SC-CO(2). At first, the equilibrium solubility of the two isomers in SC-CO(2) was determined at the extraction conditions of 44.8 MPa and 40 degrees C. The solubility of the 9Z isomer was found to be nearly 4 times higher than that of the all-E isomer (1.92 x 10(-5) g all-E isomer/g CO(2) compared to 7.64 x 10(-5) g 9Z isomer/g CO(2)). When supercritical fluid extraction was applied to a carotenoid concentrate from the algae (29 wt% beta-carotene) or a freeze-dried powder of the algae (3.1% beta-carotene), a selective separation of the 9Z/all-E isomers of beta-carotene was obtained. Thirty-nine percent recovery of beta-carotene with 80% purity of 9Z isomer was achieved at the initial stages of extraction (40 mL CO(2)). The extraction rate of beta-carotene from the freeze-dried algae powder was slower than that from the carotenoid concentrate, resulting in a reduction in the recovery and purity of the 9Z isomer. This indicates that even at the initial stage of the extraction the internal mass resistance is significant. Isomer purity and recovery could be enhanced upon grinding of the algae powder.