Optimization of sample preparation procedures for evaluation of the mineral composition of fish feeds using ICP-based methods.

This work describes the application of an experimental design in optimizing the decomposition and spectrometer operational conditions for analysis of fish feeds. The content of 22 elements (six macroelements, four microelements and eleven trace elements) in feeds for fishes (ornamental and for human consumption) was determined by inductively coupled plasma (ICP)-based methods. Limits of quantification were obtained and the values ranged between 0.02 mg kg-1 (Cd) and 76 mg kg-1 (Al). Evaluation of the methods was achieved through analysis of standard reference material, Oyster Tissue (NIST 1566b) and Tea (NCS DC 73351). Element concentrations in feed samples for ornamental fish ranged from <0.02 mg kg-1 (Cd) to 2.79% (P) and for fish breeding for human consumption from <0.02 mg kg-1 (Cd) to 2.00% (Ca). The concentrations of the elements obtained in the analyzed fish feeds were within the limits established by Brazilian and American legislation for regulated elements.

Assessment of mercury contamination based on mercury distribution in sediment, macroalgae, and seagrass in the Todos os Santos bay, Bahia, Brazil.

The Todos os Santos bay (TSB) is the second largest Brazilian bay. Despite the large number of potential anthropogenic sources of mercury (Hg) in the bay, data on this element in this marine environment are very scarce. Total Hg concentrations were therefore determined in sediment, macroalgae, and seagrass species collected during dry and rainy seasons, from eight locations. In ~45 % of the sediment samples, Hg concentration was two to four times higher than the upper value considered the regional Hg background (15 µg kg(-1)). Geoaccumulation index indicated that Hg contamination was at none to heavily contaminated. In Padina sp., Caulerpa sp., Hypnea sp., and Halodule wrigthii, Hg concentrations ranged from 10.61-297.61, 15.59-74.50, 12.84-158.03, and 4.02-67.25 µg kg(-1), respectively.

Multi-element determination in acid-digested soy protein formulations by inductively coupled plasma-optical emission spectrometry.

The concentrations of major (Ca, K, Mg, Na and P) and trace elements (Al, Cu and Fe) in soy protein formulations sold in Bahia (Brazil) were determined by inductively coupled plasma-optical emission spectrometry (ICP-OES). Liquid and powdered soy protein formulation samples, both whole and light, were digested using a conventional heating program on a hot-plate. The powdered samples were prepared according to the label instructions for human consumption. A 5.0-ml aliquot of the soy protein emulsion was transferred to a borosilicate Erlenmeyer and concentrated nitric and sulfuric acid added. After a digestion time of approximately 50 min, hydrogen peroxide was added and heating continued to give a final volume of approximately 5 ml; the colorless digests were then made up to 15.0 ml with deionised water. Residual acid content was determined by acid-base titration. Good agreement between measured and certified values for all analytes in a non-fat milk powder (NIST SRM 1549) indicated that the method was suitable for major and trace elements determination in soy protein formulations.

Review of procedures involving separation and preconcentration for the determination of cadmium using spectrometric techniques.

Spectrometric techniques for the analysis of trace cadmium have developed rapidly due to the increasing need for accurate measurements at extremely low levels of this element in diverse matrices. This review covers separation and preconcentration procedures, such as electrochemical deposition, precipitation, coprecipitation, solid phase extraction, liquid-liquid extraction (LLE) and cloud point extraction (CPE), and consider the features of the their application with several spectrometric techniques.

On-line system for preconcentration and determination of metals in vegetables by inductively coupled plasma optical emission spectrometry.

A procedure has been developed for the simultaneous determination of trace amounts of cadmium, copper, chromium, nickel and lead in digested vegetable samples. The method involves solid-phase extraction of the metals using a minicolumn of Amberlite XAD-4 modified with dihydroxybenzoic acid (DHB) and detection by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). The elution of the metals from minicolumn was performed with 1.0 molL(-1) hydrochloric acid. Variables associated with flow preconcentration system performance, such as pH, buffer concentration, eluent concentration and sampling flow rate, were optimized. The developed procedure provides enrichment factors of 100, 72, 16, 91 and 53, for cadmium, copper, chromium, nickel and lead, respectively. Detection limits (3sigma(B)) were 0.02 (Cd), 0.23 (Cu), 0.58 (Cr), 0.060 (Ni) and 0.54 (Pb)microgL(-1). The procedure was applied for determination of metals in samples of guarana and cabbage. The accuracy of the method was checked by the analysis of a certified reference material (NIST 1571, Orchard leaves). Results found were in agreement with certified values.

Method development for the determination of manganese, cobalt and copper in green coffee comparing direct solid sampling electrothermal atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry.

A method has been developed for the determination of cobalt, copper and manganese in green coffee using direct solid sampling electrothermal atomic absorption spectrometry (SS-ET AAS). The motivation for the study was that only a few elements might be suitable to determine the origin of green coffee so that the multi-element techniques usually applied for this purpose might not be necessary. The three elements have been chosen as test elements as they were found to be significant in previous investigations. A number of botanical certified reference materials (CRM) and pre-analyzed samples of green coffee have been used for method validation, and inductively coupled plasma optical emission spectrometry (ICP OES) after microwave-assisted acid digestion of the samples as reference method. Calibration against aqueous standards could be used for the determination of Mn and Co by SS-ET AAS, but calibration against solid CRM was necessary for the determination of Cu. No significant difference was found between the results obtained with the proposed method and certified or independently determined values. The limits of detection for Mn, Cu and Co were 0.012, 0.006 and 0.004mugg(-1) using SS-ET AAS and 0.015, 0.13 and 0.10mugg(-1) using ICP OES. Seven samples of Brazilian green coffee have been analyzed, and there was no significant difference between the values obtained with SS-ET AAS and ICP OES for Mn and Cu. ICP OES could not be used as a reference method for Co, as essentially all values were below the limit of quantification of this technique.

Separation and preconcentration procedures for the determination of lead using spectrometric techniques: a review.

Lead is recognized worldwide as a poisonous metal. Thus, the determination of this element is often required in environmental, biological, food and geological samples. However, these analyses are difficult because such samples contain relatively low concentrations of lead, which fall below the detection limit of conventional analytical techniques such as flame atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry. Several preconcentration procedures to determine lead have therefore been devised, involving separation techniques such as liquid-liquid extraction, solid phase extraction, coprecipitation and cloud point extraction. Citing 160 references, this paper offers a critical review of preconcentration procedures for determining lead using spectroanalytical techniques.

Optimisation of focused-microwave assisted digestion procedure for Kjeldahl nitrogen determination in bean samples by factorial design and Doehlert design.

In the present paper a focused-microwave Kjeldahl digestion procedure without metal catalyst for nitrogen determination in bean samples was developed. Temperature at which the decomposition plateau occurs, mass of potassium sulphate and either volume of sulphuric acid or hydrogen peroxide were optimised. Results of the two-level full factorial design (2(4)) based on an analysis of variance demonstrated that only the decomposition plateau temperature and the sulphuric acid volume were statistically significant. Optimal conditions for the digestion of bean samples were obtained by using Doehlert design. The modified digestion procedure of 0.25g of bean samples has been performed in 27min at optimised conditions. The accuracy of the developed procedure by the analysis of the two certified reference materials, peach leaves (NIST 1547) and apple leaves (NIST 1515). The t-test applied to the results revealed that they are in agreement (p > 0.05) with the certified values. The precision, expressed as relative standard deviation (R.S.D.) was of 0.96% for four successive Kjeldahl nitrogen determinations. In addition, interlaboratory exercises were performed with several bean samples in reference Brazilian food control laboratory.