Properties of Adhesive Mortars Using Waste Glass.

This study investigates the use of waste glass as an active aggregate in glass polymers based on water glass, aiming to enhance the sustainability of construction materials by utilizing recyclable waste. Methodologically, the research employs a combination of water glass as a binder with waste glass, analyzing their chemical interaction and the resulting mechanical properties. The primary findings reveal that the inclusion of finely ground waste glass not only promotes the polycondensation and hardening processes of water glass but also significantly influences the adhesive and cohesive strengths of the developed glass polymers. After 7 days of hardening, the tensile strength of these materials exceeds that of standard concrete with values reaching up to 4.11 MPa, indicating strong adhesion capabilities that could pull out fragments of the concrete substrate. Conclusively, the study underscores the potential of waste glass in improving the structural and economic efficiencies of building materials, contributing to a reduction in landfill waste and offering a promising avenue for the innovative use of recyclable materials in construction.

Properties of Geopolymers Based on Metakaolin and Soda-Lime Waste Glass.

The paper determines the properties of geopolymer pastes based on metakaolin and soda-lime waste glass. The density, alkaline activity, strength and microstructure of the reference geopolymer, as well as geopolymers with a 10%, 30% and 50% soda-lime waste glass content instead of metakaolin, were tested. The experimental results indicate that the properties of the geopolymers with waste glass largely depend on the ratio of the liquid to solid substance. Increasing the content of waste glass causes an increase in the fluidity of the geopolymer paste, which in turn allows the amount of water glass, i.e., an activator during the obtaining of geopolymers, to be reduced. On the basis of the conducted tests, it was found that the strength of geopolymers can be increased by adding up to 50% of soda-lime waste glass instead of metakaolin and by having a lower content of water glass.

Extraction of Alkalis from Silicate Materials PART 2-Crystalline Silicate Materials.

A feature of silicate materials is that they can exist in two antagonistic states-amorphous and crystalline. In both cases, alkalis, which are always present in chemical compositions, play an important role. A feature of alkalis in the composition of silicate materials is that at certain stages of the synthesis of products, they play a positive role, reducing the temperature of synthesis, but worsening the properties of these products at the stage of their operation. Synthesis products should be understood as important building materials such as building glass and cement. It is known that the performance properties of glass and cement can be improved by the extraction of alkalis. In the first part of the article, the issues of extraction of alkalis in amorphous silicate materials-inorganic glasses were considered. This article presents the results of studies on the extraction process of alkalis in crystalline silicate materials-cement.

The Effect of Fine-Ground Glass on the Hydration Process and Properties of Alumina-Cement-Based Composites.

This paper discusses studies regarding the impact of fine-ground glass additives on the hydration and properties of alumina cement pastes and mortars. Fine-ground glass was added to pastes and mortars instead of high-alumina cement and calcium aluminate cement in quantities of 5% and 10%. The findings are inconclusive as to the impact of glass on the properties of tested alumina cement types. The effect produced via the addition of glass instead of cement depends on the type of alumina cement used. Adding fine-ground glass to high-alumina cement enhances the paste's density while improving paste and mortar strength. Using the same additive for calcium aluminate cement reduces its density and strength. The addition of glass to high-alumina cement adversely affects its strength at higher temperatures.

Influence of Water Glass Introduction Methods on Selected Properties of Portland Cement.

This article presents a study of the effect of water glass and its introduction on the hydration of Portland cement and its properties in plastic and solid states. The introduction of sodium water glass into the mixing water extends the setting time of Portland cement by 35%, while introduction into the cement paste reduces it by 24.4%; for potassium water glass, the respective values are 10.8% and 10.8%. The introduction of sodium water glass into the mixing water decreases its consistency by 17.6%; its introduction into the cement paste reduces its consistency by 97%. Based on microcalorimetric studies and using the modelling method, mechanisms of the processes occurring in the cement paste, for various methods of introducing water glass admixtures, and their influence on the properties of cement are proposed. The important implications of the obtained results are that, using various methods for introducing admixtures of water glass, it is possible to regulate the setting of cement slurries within significant limits that are important during their transportation.

Alkaline Activity of Portland Cement with Additives of Waste Glass.

The concept of the alkaline activity of powdered materials introduced into cement compositions has been proposed, along with methods for its determination. The possibility of using waste glass as an active additive to Portland cement was evaluated from the standpoint of alkaline activity. Replacing the Portland cement component with glass waste in the form of glass powder at amounts from 1 to 35% made it possible to maintain the cement composition's alkaline activity at a level that met the standard requirements. The previously unknown effects of mixed alkali in Portland cement in the presence of glass waste are described. Portland cement has a high potassium alkaline activity; however, container glass has a high sodium alkaline activity and a fairly low potassium alkaline activity. When glass waste is introduced into the structure of cement compositions, potassium alkaline activity is reduced.