Comparison of measurement systems for assessing number- and mass-based particle filtration efficiency.

The particle filtration efficiency (PFE) of a respirator or face mask is one of its key properties. While the physics of particle filtration results in the PFE being size-dependent, measurement standards are specified using a single, integrated PFE, for simplicity. This integrated PFE is commonly defined concerning either the number (NPFE) or mass (MPFE) distribution of particles as a function of size. This relationship is non-trivial; it is influenced by both the shape of the particle distribution and the fact that multiple practical definitions of particle size are used. This manuscript discusses the relationship between NPFE and MPFE in detail, providing a guide to practitioners. Our discussion begins with a description of the theory underlying different variants of PFE. We then present experimental results for a database of size-resolved PFE (SPFE) measurements for several thousand candidate respirators and filter media, including filter media with systematically varied properties and commercial samples that span 20%-99.8% MPFE. The observed relationships between NPFE and MPFE are discussed in terms of the most-penetrating particle size (MPPS) and charge state of the media. For the sodium chloride particles used here, we observed that the MPFE was greater than NPFE for charged materials and vice versa for uncharged materials. This relationship is observed because a shift from NPFE to MPFE weights the distribution toward larger sizes, while charged materials shift the MPPS to smaller sizes. Results are validated by comparing the output of a pair of automated filter testers, which are used in gauging standards compliance, to that of MPFE computed from a system capable of measuring SPFE over the 20 nm-500 nm range.

Systematic experimental comparison of particle filtration efficiency test methods for commercial respirators and face masks.

Respirators, medical masks, and barrier face coverings all filter airborne particles using similar physical principles. However, they are tested for certification using a variety of standardized test methods, creating challenges for the comparison of differently certified products. We have performed systematic experiments to quantify and understand the differences between standardized test methods for N95 respirators (NIOSH TEB-APR-STP-0059 under US 42 CFR 84), medical face masks (ASTM F2299/F2100), and COVID-19-related barrier face coverings (ASTM F3502-21). Our experiments demonstrate the role of face velocity, particle properties (mean size, size variability, electric charge, density, and shape), measurement techniques, and environmental preconditioning. The measured filtration efficiency was most sensitive to changes in face velocity and particle charge. Relative to the NIOSH method, users of the ASTM F2299/F2100 method have commonly used non-neutralized (highly charged) aerosols as well as smaller face velocities, each of which may result in approximately 10% higher measured filtration efficiencies. In the NIOSH method, environmental conditioning at elevated humidity increased filtration efficiency in some commercial samples while decreasing it in others, indicating that measurement should be performed both with and without conditioning. More generally, our results provide an experimental basis for the comparison of respirators certified under various international methods, including FFP2, KN95, P2, Korea 1st Class, and DS2.

Gated photon correlation spectroscopy for acoustical particle velocity measurements in free-field conditions.

The measurement of acoustic pressure at a point in space using optical methods has been the subject of extensive research in airborne acoustics over the last four decades. The main driver is to reliably establish the acoustic pascal, thus allowing the calibration of microphones with standard and non-standard dimensions to be realized in an absolute and direct manner. However, the research work so far has mostly been limited to standing wave tubes. This Letter reports on the development of an optical system capable of measuring acoustic particle velocities in free-field conditions; agreement within less than 0.6 dB was obtained with standard microphone measurements during these initial experiments.

Characterization of solid complex multiphase systems based on oscillatory photon correlation spectroscopy.

The particle loading and dispersion profiles are two significant properties directly affecting the engineering properties and performance characteristics of polymer nanocomposites. Current measurement techniques are often destructive, require special sample preparation, are limited to small, unrepresentative sample size, and/or cannot discriminate between the two aforementioned parameters. This Letter demonstrates the application of photon correlation spectroscopy on mechanically oscillated solids; experimental results show that this technique can discriminate between different grades of such materials.