Dynamic molecular mechanism of the nuclear pore complex permeability barrier.

Nuclear pore complexes (NPCs) mediate nucleocytoplasmic transport of specific macromolecules while impeding the exchange of unsolicited material. However, key aspects of this gating mechanism remain controversial. To address this issue, we determined the nanoscopic behavior of the permeability barrier directly within yeast S. cerevisiae NPCs at transport-relevant timescales. We show that the large intrinsically disordered domains of phenylalanine-glycine repeat nucleoporins (FG Nups) exhibit highly dynamic fluctuations to create transient voids in the permeability barrier that continuously shape-shift and reseal, resembling a radial polymer brush. Together with cargo-carrying transport factors the FG domains form a feature called the central plug, which is also highly dynamic. Remarkably, NPC mutants with longer FG domains show interweaving meshwork-like behavior that attenuates nucleocytoplasmic transport in vivo. Importantly, the bona fide nanoscale NPC behaviors and morphologies are not recapitulated by in vitro FG domain hydrogels. NPCs also exclude self-assembling FG domain condensates in vivo, thereby indicating that the permeability barrier is not generated by a self-assembling phase condensate, but rather is largely a polymer brush, organized by the NPC scaffold, whose dynamic gating selectivity is strongly enhanced by the presence of transport factors.

Supramolecular tholos-like architecture constituted by archaeal proteins without functional annotation.

Euryarchaeal genomes encode proteasome-assembling chaperone homologs, PbaA and PbaB, although archaeal proteasome formation is a chaperone-independent process. Homotetrameric PbaB functions as a proteasome activator, while PbaA forms a homopentamer that does not interact with the proteasome. Notably, PbaA forms a complex with PF0014, an archaeal protein without functional annotation. In this study, based on our previous research on PbaA crystal structure, we performed an integrative analysis of the supramolecular structure of the PbaA/PF0014 complex using native mass spectrometry, solution scattering, high-speed atomic force microscopy, and electron microscopy. The results indicated that this highly thermostable complex constitutes ten PbaA and ten PF0014 molecules, which are assembled into a dumbbell-shaped structure. Two PbaA homopentameric rings correspond to the dumbbell plates, with their N-termini located outside of the plates and C-terminal segments left mobile. Furthermore, mutant PbaA lacking the mobile C-terminal segment retained the ability to form a complex with PF0014, allowing 3D modeling of the complex. The complex shows a five-column tholos-like architecture, in which each column comprises homodimeric PF0014, harboring a central cavity, which can potentially accommodate biomacromolecules including proteins. Our findings provide insight into the functional roles of Pba family proteins, offering a novel framework for designing functional protein cages.

Mutational and Combinatorial Control of Self-Assembling and Disassembling of Human Proteasome α Subunits.

Eukaryotic proteasomes harbor heteroheptameric α-rings, each composed of seven different but homologous subunits α1-α7, which are correctly assembled via interactions with assembly chaperones. The human proteasome α7 subunit is reportedly spontaneously assembled into a homotetradecameric double ring, which can be disassembled into single rings via interaction with monomeric α6. We comprehensively characterized the oligomeric state of human proteasome α subunits and demonstrated that only the α7 subunit exhibits this unique, self-assembling property and that not only α6 but also α4 can disrupt the α7 double ring. We also demonstrated that mutationally monomerized α7 subunits can interact with the intrinsically monomeric α4 and α6 subunits, thereby forming heterotetradecameric complexes with a double-ring structure. The results of this study provide additional insights into the mechanisms underlying the assembly and disassembly of proteasomal subunits, thereby offering clues for the design and creation of circularly assembled hetero-oligomers based on homo-oligomeric structural frameworks.

Nuclear Pore Membrane Proteins Self-Assemble into Nanopores.

Large multiprotein nanopores remain difficult to reconstitute in vitro, such as, for instance, the nuclear pore complex (NPC) that regulates macromolecular transport between the nucleus and cytoplasm in cells. Here, we report that two NPC pore membrane proteins self-assemble into ∼20 nm diameter nanopores following in vitro reconstitution into lipid bilayers. Pore formation follows from the assembly of Pom121 and Ndc1 oligomers, which arrange into ringlike membrane structures that encircle aqueous, electrically conductive pores. This represents a key step toward reconstituting membrane-embedded NPC mimics for biological studies and biotechnological applications.

Conversion of functionally undefined homopentameric protein PbaA into a proteasome activator by mutational modification of its C-terminal segment conformation.

Recent bioinformatic analyses identified proteasome assembly chaperone-like proteins, PbaA and PbaB, in archaea. PbaB forms a homotetramer and functions as a proteasome activator, whereas PbaA does not interact with the proteasome despite the presence of an apparent C-terminal proteasome activation motif. We revealed that PbaA forms a homopentamer predominantly in the closed conformation with its C-terminal segments packed against the core domains, in contrast to the PbaB homotetramer with projecting C-terminal segments. This prompted us to create a novel proteasome activator based on a well-characterized structural framework. We constructed a panel of chimeric proteins comprising the homopentameric scaffold of PbaA and C-terminal segment of PbaB and subjected them to proteasome-activating assays as well as small-angle X-ray scattering and high-speed atomic force microscopy. The results indicated that the open conformation and consequent proteasome activation activity could be enhanced by replacement of the crystallographically disordered C-terminal segment of PbaA with the corresponding disordered segment of PbaB. Moreover, these effects can be produced just by incorporating two glutamate residues into the disordered C-terminal segment of PbaA, probably due to electrostatic repulsion among the negatively charged segments. Thus, we successfully endowed a functionally undefined protein with proteasome-activating activity by modifying its C-terminal segment.

Correction: Rate constants, processivity, and productive binding ratio of chitinase A revealed by single-molecule analysis.

Correction for 'Rate constants, processivity, and productive binding ratio of chitinase A revealed by single-molecule analysis' by Akihiko Nakamura et al., Phys. Chem. Chem. Phys., 2018, DOI: .

Dynamic clustering of dynamin-amphiphysin helices regulates membrane constriction and fission coupled with GTP hydrolysis.

Dynamin is a mechanochemical GTPase essential for membrane fission during clathrin-mediated endocytosis. Dynamin forms helical complexes at the neck of clathrin-coated pits and their structural changes coupled with GTP hydrolysis drive membrane fission. Dynamin and its binding protein amphiphysin cooperatively regulate membrane remodeling during the fission, but its precise mechanism remains elusive. In this study, we analyzed structural changes of dynamin-amphiphysin complexes during the membrane fission using electron microscopy (EM) and high-speed atomic force microscopy (HS-AFM). Interestingly, HS-AFM analyses show that the dynamin-amphiphysin helices are rearranged to form clusters upon GTP hydrolysis and membrane constriction occurs at protein-uncoated regions flanking the clusters. We also show a novel function of amphiphysin in size control of the clusters to enhance biogenesis of endocytic vesicles. Our approaches using combination of EM and HS-AFM clearly demonstrate new mechanistic insights into the dynamics of dynamin-amphiphysin complexes during membrane fission.

Rate constants, processivity, and productive binding ratio of chitinase A revealed by single-molecule analysis.

Serratia marcescens chitinase A is a linear molecular motor that hydrolyses crystalline chitin in a processive manner. Here, we quantitatively determined the rate constants of elementary reaction steps, including binding (kon), translational movement (ktr), and dissociation (koff) with single-molecule fluorescence imaging. The kon for a single chitin microfibril was 2.1 × 109 M-1 µm-1 s-1. The koff showed two components, k (3.2 s-1, 78%) and k (0.38 s-1, 22%), corresponding to bindings to different crystal surfaces. From the kon, k, k and ratio of fast and slow dissociations, dissociation constants for low and high affinity sites were estimated as 2.0 × 10-9 M µm and 8.1 × 10-10 M µm, respectively. The ktr was 52.5 nm s-1, and processivity was estimated as 60.4. The apparent inconsistency between high turnover (52.5 s-1) calculated from ktr and biochemically determined low kcat (2.6 s-1) is explained by a low ratio (4.8%) of productive enzymes on the chitin surface (52.5 s-1 × 0.048 = 2.5 s-1). Our results highlight the importance of single-molecule analysis in understanding the mechanism of enzymes acting on a solid-liquid interface.

Two-step process for disassembly mechanism of proteasome α7 homo-tetradecamer by α6 revealed by high-speed atomic force microscopy.

The 20S proteasome is a core particle of the eukaryotic proteasome responsible for proteolysis and is composed of layered α and ß hetero-heptameric rings. The α7 subunit, which is one of components of the α ring, is known to self-assemble into a double-ringed homo-tetradecamer composed of two layers of the α7 heptameric ring. The α7 tetradecamer is known to disassemble upon the addition of α6 subunit, producing a 1:7 hetero-octameric α6-α7 complex. However, the detailed disassembly mechanism remains unclear. Here, we applied high-speed atomic force microscopy (HS-AFM) to dissect the disassembly process of the α7 double ring caused by interaction with the α6. HS-AFM movies clearly demonstrated two different modes of interaction in which the α6 monomer initially cracks at the interface between the stacked two α7 single rings and the subsequent intercalation of the α6 monomer in the open pore of the α7 single ring blocks the re-association of the single rings into the double ring. This result provides a mechanistic insight about the disassembly process of non-native homo-oligomers formed by proteasome components which is crucial for the initial process for assembly of 20S proteasome.

High-Resolution Imaging of a Single Gliding Protofilament of Tubulins by HS-AFM.

In vitro gliding assay of microtubules (MTs) on kinesins has provided us with valuable biophysical and chemo-mechanical insights of this biomolecular motor system. Visualization of MTs in an in vitro gliding assay has been mainly dependent on optical microscopes, limited resolution of which often render them insufficient sources of desired information. In this work, using high speed atomic force microscopy (HS-AFM), which allows imaging with higher resolution, we monitored MTs and protofilaments (PFs) of tubulins while gliding on kinesins. Moreover, under the HS-AFM, we also observed splitting of gliding MTs into single PFs at their leading ends. The split single PFs interacted with kinesins and exhibited translational motion, but with a slower velocity than the MTs. Our investigation at the molecular level, using the HS-AFM, would provide new insights to the mechanics of MTs in dynamic systems and their interaction with motor proteins.