Improving Properties of Starch-Based Adhesives with Carboxylic Acids and Enzymatically Polymerized Lignosulfonates.

A novel strategy for improving wet resistance and bonding properties of starch-based adhesives using enzymatically polymerized lignosulfonates and carboxylic acids as additives was developed. Therefore, lignosulfonates were polymerized by laccase to a molecular weight of 750 kDa. Incorporation of low concentrations (up to 1% of the starch weight) of 1,2,3,4-butanetetracarboxylic acid (BTCA) led to further improvement on the properties of the adhesives, while addition of greater amounts of BTCA led to a decrease in the properties measured due to large viscosity increases. Great improvements in wet-resistance from 22 to 60 min and bonding times (from 30 to 20 s) were observed for an adhesive containing 8% enzymatically polymerized lignin and 1% BTCA. On the other hand, the addition of citric acid (CA) deteriorated the properties of the adhesives, especially when lignosulfonate was present. In conclusion, this study shows that the addition of the appropriate amount of enzymatically polymerized lignosulfonates together with carboxylic acids (namely BTCA) to starch-based adhesives is a robust strategy for improving their wet resistance and bonding times.

An Organic Chemist's Guide to Mediated Laccase Oxidation.

Laccases are oxidases that only require O2 as a terminal oxidant. Thus, they provide an attractive green alternative to established alcohol oxidation protocols. However, laccases typically require catalytic amounts of mediator molecules to serve as electron shuttles between the enzyme and desired substrate. Consequently, laccase-mediator systems are defined by a multitude of parameters such as, e. g., the choice of laccase and mediator, the respective concentrations, pH, and the oxygen source. This complexity and a perceived lack of comparable data throughout literature represent an entry burden into this field. To provide a solid starting point, particularly for organic chemists, we herein provide a time-resolved, quantitative laccase and mediator screening based on the oxidation of anis alcohol as model reaction. We measured the redox potentials of mediators under the reaction conditions to relate them to their performance. Lastly, for particularly efficient laccase-mediator pairs, we screened important reaction parameters, resulting in an optimized setup for mediator-assisted laccase catalyzed oxidations.

Enzymatic synthesis of wet-resistant lignosulfonate-starch adhesives.

This work describes a new method for improving the properties, mainly the wet-resistance, of starch-based adhesives using enzymatically polymerized lignosulfonates. A correlation of viscosity with molecular weight was found, allowing simple control of enzymatic polymerization of lignosulfonates. Incorporation of lignosulfonates polymerized from 29 kDa to > 4500 kDa using laccase led to a considerable increase in wet-resistance (from 15 to 20 min for the laminating glue and from 150 to 1200 min for the bag glue) while not affecting (for the laminating glue) or even improving the bonding time (from 80 to 60 s for the bag glue). Finally, the effect of active laccase in the final adhesive was investigated by enzymatic inactivation using NaN3 before formulation of the glue, as well as by extra laccase addition. In conclusion, this study shows that enzymatically polymerized lignosulfonate is a robust strategy for improving wet resistance of starch-based adhesives.