Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 11 de 11
Filter
Add more filters










Publication year range
1.
Opt Lett ; 38(12): 2029-31, 2013 Jun 15.
Article in English | MEDLINE | ID: mdl-23938966

ABSTRACT

Nonlinear mode coupling among two beams of different wavelength that copropagate in a bimodal highly birefringent optical fiber may lead to the effect of modal attraction. Under such circumstances, the modal distribution of light at a pump wavelength is replicated at the signal wavelength, nearly irrespective of the input mode excitation conditions of the signal.

2.
Opt Express ; 20(24): 27220-5, 2012 Nov 19.
Article in English | MEDLINE | ID: mdl-23187577

ABSTRACT

We experimentally study Bragg-scattering four-wave mixing in a highly nonlinear fiber at telecom wavelengths using photon counters. We explore the polarization dependence of this process with a continuous wave signal in the macroscopic and attenuated regime, with a wavelength shift of 23 nm. Our measurements of mean photon numbers per second under various pump polarization configurations agree well with the theoretical and numerical predictions based on classical models. We discuss the impact of noise under these different polarization configurations.


Subject(s)
Light , Models, Theoretical , Optical Fibers , Photons , Refractometry/instrumentation , Scattering, Radiation , Telecommunications/instrumentation , Computer Simulation , Computer-Aided Design , Equipment Design , Fiber Optic Technology/instrumentation
3.
Opt Lett ; 37(11): 2073-5, 2012 Jun 01.
Article in English | MEDLINE | ID: mdl-22660125

ABSTRACT

We propose a method of suppressing the relative intensity noise caused by polarization-dependent gain that is inherent to Raman polarizers (RPs). This method involves bit-synchronously scrambling the state of polarization of a pulse (bit) before the pulse enters the RP. The proposed solution works for RPs operating in a depleted regime and is compatible with multichannel configurations.

4.
Opt Lett ; 37(4): 737-9, 2012 Feb 15.
Article in English | MEDLINE | ID: mdl-22344165

ABSTRACT

We theoretically investigate the polarization properties of Raman amplifiers based on silicon-on-insulator waveguides, and show that it is possible to realize a waveguide Raman polarizer. The Raman polarizer is a special type of Raman amplifier with the property of producing an amplified and highly repolarized beam when it is fed by a relatively weak and unpolarized signal.

5.
Opt Lett ; 36(20): 4050-2, 2011 Oct 15.
Article in English | MEDLINE | ID: mdl-22002382

ABSTRACT

We propose a type of lossless nonlinear polarizer, novel to our knowledge, a device that transforms any input state of polarization (SOP) of a signal beam into one and the same well-defined SOP toward the output, and perform this without any polarization-dependent losses. At the polarizer output end, the signal SOP appears to be locked to the input pump SOP. The polarizer is based on the nonlinear Kerr interaction of copropagating signal and pump beams in a telecom or randomly birefringent optical fiber.

6.
Opt Lett ; 36(9): 1632-4, 2011 May 01.
Article in English | MEDLINE | ID: mdl-21540951

ABSTRACT

We exactly solve the initial-boundary value problem of interaction of three waves in the limit when one of these waves is strongly damped. The solution is applied to the characterization of transient effects in Raman amplifiers, with a special emphasis on the possibility of generating Stokes pulses with peak powers that are orders of magnitude higher than the input power of the pump beam.

7.
Opt Lett ; 35(23): 3949-51, 2010 Dec 01.
Article in English | MEDLINE | ID: mdl-21124575

ABSTRACT

Lossless polarizers are conservative nonlinear optical devices that transform unpolarized light into highly polarized light without polarization-dependent losses. The device proposed here consists of an up to 100-m-long segment of nonlinear highly birefringent or unidirectionally spun fiber pumped from the output end by an intense backward-propagating beam. An initially unpolarized (scrambled) signal beam acquires a degree of polarization close to 100% toward the fiber output.

8.
Opt Lett ; 35(23): 3970-2, 2010 Dec 01.
Article in English | MEDLINE | ID: mdl-21124582

ABSTRACT

We propose and apply a theoretical description of a Raman amplifier based on the vector model of randomly birefringent fibers to the characterization of Raman polarizers. The Raman polarizer is a special type of Raman amplifier with the property of producing a highly repolarized beam when fed by relatively weak and unpolarized light.

9.
Opt Lett ; 35(12): 2058-60, 2010 Jun 15.
Article in English | MEDLINE | ID: mdl-20548385

ABSTRACT

We show that, in a coherent two-level optical amplifier with Kerr nonlinearity and linear loss, any weak seed pulse evolves into a fixed powerful linearly chirped pulse with quasi-parabolic shape. This process is associated with a transition from the incoherent into the coherent amplification regime, thus enabling in practice the generation of pulses with a spectrum wider than the linear gain bandwidth.

10.
Opt Lett ; 27(9): 760-2, 2002 May 01.
Article in English | MEDLINE | ID: mdl-18007924

ABSTRACT

The noise of spontaneous emission of a short pulse propagating in a fiber with losses is translated into frequency jitter, causing exponential growth of jitter. This is in contrast with a classical treatment in which the jitter remains constant. Absorption-induced frequency noise continuously affects timing through group-velocity dispersion, and the accumulated timing jitter is therefore always larger than when it is evaluated classically. This numerical discrepancy is demonstrated to be considerable and points to the importance of including quantum effects in estimations of noise in high-bit-rate communications.

11.
Opt Lett ; 27(19): 1723-5, 2002 Oct 01.
Article in English | MEDLINE | ID: mdl-18033348

ABSTRACT

Frequency and timing noise added in a linear optical amplifier of gain G grows as (G-1)/G. Provided that the pulse is initially in a coherent state, the output frequency and timing noise cannot exceed twice the input value. It is also shown that, in a transmission line with zero net gain and loss, the frequency and timing noise added in the lossy medium is equal to or larger than the noise added in the amplifier.

SELECTION OF CITATIONS
SEARCH DETAIL
...