ABSTRACT
Some retro-pericyclic reactions, as a result of their high exothermicity and short trajectories, are the perfect ground for heavy atom tunneling molecular decompositions, also known as "quantum tunneling instability" (QTI). Considering this effect, in our first installment [Frenklach, A.; Amlani, H.; Kozuch, S. Quantum Tunneling Instability in Pericyclic Reactions. J. Am. Chem. Soc. 2024, 146 (17), 11823-11834, DOI: 10.1021/jacs.4c00608], we computed several retro-Diels-Alder reactions, predicting that many studied reactants cannot be isolated. Herein, we will explore the QTI of retro-cheletropic, coarctate, and ene exemplars, where again we hypothesize the impossibility to detect their reactants.
ABSTRACT
Several cycloreversion reactions of the retro-Diels-Alder type were computationally assessed to understand their quantum tunneling (QT) reactivity. N2, CO, and other leaving groups were considered based on their strong exothermicity, as it reduces their thermodynamic and kinetic stabilities. Our results indicate that for many of these reactions, it is essential to take into account their QT decomposition rate, which can massively weaken their molecular stability and shorten their half-lives even at deep cryogenic temperatures. In practical terms, this indicates that many supposedly stable molecules will actually be unsynthesizable or unisolable, and therefore trying to prepare or detect them would be a futile attempt. In addition, we discuss the importance of tunneling to correctly understand the enthalpy of activation and the collective atomic effect on the tunneling kinetic isotope effects to test if third-row atoms can tunnel in a chemical reaction. This project raises the question of the importance of in silico chemistry to guide in vitro chemistry, especially in cases where the latter cannot solve its own uncertainties.
ABSTRACT
Through computational analysis we found that pentazine and hexazine, two hypothetical high-energy density materials, exhibit inherent instability due to quantum tunneling effects. This instability remains even near the absolute zero, and therefore they can be deemed as unsynthesizable. We propose substituents that could potentially stabilize pentazine, especially dimethylamine.
ABSTRACT
Boron is the archetypal Lewis acid, and therefore it is only natural that it prefers to bind nitrogen, its usual Lewis base counterpart. To challenge this assumption, we present a computationally designed bicyclopentane molecule akin to [1.1.1]propellane, but with pyramidal B and N inner atoms bonded by an "inverted" dative bond. Unexpectedly, the dimer of this system prefers to interact via an atypical boron-boron bond over the supposedly obvious boron-nitrogen bond. A molecular orbital analysis shows that the boron in this peculiar entity acts both as an electron donor and an electron acceptor, making the dimerization an amphoteric-amphoteric interaction process.
ABSTRACT
Dioxobimanes, colloquially known as bimanes, are a well-established family of N-heterobicyclic compounds that share a characteristic core structure, 1,5-diazabicyclo[3.3.0]octadienedione, bearing two endocyclic carbonyl groups. By sequentially thionating these carbonyls in the syn and anti isomers of the known (Me,Me)dioxobimane, we were able to synthesize a series of thioxobimanes, representing the first heavy-chalcogenide bimane variants. These new compounds were extensively characterized spectroscopically and crystallographically, and their aromaticity was probed computationally. Their potential role as ligands for transition metals was demonstrated by synthesizing a representative gold(I)-thioxobimane complex.
ABSTRACT
A layered meta-benchmarking analysis was devised with the aim of illustrating how to produce an experimental/computational protocol for the method selection and estimation of Gibbs energies of catalytically prominent reactions. Our test subject involved the active-latent equilibrium through the cis-trans isomerism of two metathesis catalysts: mesitylene-Ru-SCF3-Cl and diisopropylphenyl-Ru-SCF3-Cl. The strategy was two-fold: first to perform a computational benchmark for the energies in the gas phase, followed by benchmarking the enthalpy and the Gibbs energy, including solvation and entropy, from experimental references. This "wedding cake" build-up of subsequent methods applied to our particular small test reaction indicates that: (1) DLPNO-CCSD(T)/CBS works well as a reference method for large systems. (2) Among several functionals ωB97XD and M06 were the most accurate. (3) Choosing between IEF-PCM and SMD solvation models turned out to be case dependent. (4) For the vibrational entropic component, low-frequency vibrations often produce humungous errors, which can be improved by Cramer and Truhlar's or Grimme's methods; however, their cut-off parameters had to be lowered from their standard values. (5) Solvation methods are important for enthalpies, but they are inadequate for entropies. (6) All of these components are equally important for the accuracy of organometallic complexes' reactions. The only way to find the right method for the right reasons is to be sure to match all of the Gibbs energy terms to benchmarked experimental and computational values.
ABSTRACT
Many diamond properties are defined by substitutional defects (i. e., a carbon atom replaced by another element), which may involve the formation of structural isomers that can interconvert. Herein, we analysed by computational means the structure, thermodynamics, and kinetics of substitutional nitrogen, boron, and oxygen from small diamondoids up to the diamond bulk, focusing on the possibility of heavy atom quantum tunnelling rearrangement between the isomers. The large range of threshold energies and bond lengths lead to a variety of intriguing behaviours, including cage size dependent thermally activated tunnelling of nitrogen, and quantum delocalization of boron. In addition, we predict that applying an external electric field makes it possible to control the rearrangement thermodynamics and kinetics through tunnelling, which lets us hypothesize that these systems can potentially be used as atomic memory devices.
ABSTRACT
Most of the experimental and theoretical work in hole interactions (HIs) is mainly focused on exploiting the nature and characteristics of σ and π-holes. In this perspective, we focus our attention on understanding the origin and properties of lone-pair holes. These holes are present on an atom opposite to its lone-pair region. Utilizing some new and old examples, such as X3N/Pâ¯F- (X = F/Cl/Br/I), F-Cl/Br/Iâ¯H3Pâ¯NCH and H3B-NBr3 along with other molecular systems, we explored to what extent these lp-holes participate in lp-hole interactions, if they participate at all.
ABSTRACT
Secondary-sphere interactions are often harnessed to control reactivity and selectivity in organometallic and enzymatic catalysis. Yet, such strategies have only recently been explicitly applied in the context of organocatalytic systems. Although increased stability, reproducibility, and selectivity were obtained in previous work using this approach, the precise mechanistic pathway promoted by secondary-sphere modification in organocatalysis remained unclear. Herein, we report a comprehensive mechanistic study on the origin of the unique reactivity patterns and stereocontrol observed with boronic acids (BAs) as secondary-sphere modifiers of N-heterocyclic carbene (NHC) organocatalysts. Kinetic experiments revealed partial order in catalyst upon the addition of BA and unusual preactivation behavior, indicating the presence of stable off-cycle catalyst aggregation and BA-base adducts. These hypotheses were supported both by computations and by a series of NMR and nonlinear effect experiments. Furthermore, computations indicated a rate-limiting, water-assisted hydrogen atom transfer mechanism. This finding led to a considerable enhancement in the experimental reaction rate while maintaining excellent enantioselectivity by adding catalytic amounts of water. Finally, computations and racemization experiments uncovered an uncommon Curtin-Hammett-controlled enantioselectivity in the presence of secondary-sphere modifiers.
Subject(s)
Water , Reproducibility of Results , Stereoisomerism , Magnetic Resonance SpectroscopyABSTRACT
Oxidation of methane at ambient conditions to useful oxygenates at a bilayer-coated electrode is demonstrated. The composition of the coating, a Mn porphyrin mediator layer on top of a N(OH)2/NiOOH one, allows a cascade of oxygen transfer events upon applying a potential. It is shown, using (spectro)electrochemical techniques, density functional theory computations and product analytical methods, that formate and methanol accompanied by CO2 suppression can be observed at a certain potential range. This can lead to further development of similar oxygen/electron transfer cascades for possible use in devices for energy conversion and fuel/product generation.
ABSTRACT
Recently, a tellurium-based chalcogen-bond-catalyzed nitro-Michael reaction was reported ( Angew. Chem. Int. Ed. 2019, 58, 16923), taking advantage of the strong Lewis acidity of the catalyst. This species was found to be more effective than an analogous iodine-based halogen bond organocatalyst. Herein, we present a detailed mechanistic and kinetic analysis of these catalytic cycles including the influence of the solvent (and the performance of different intrinsic solvation models). While the chalcogen bonding interaction is fundamental to activate the C-C bond formation, we found that the presence of a two-water molecular bridge is critical to allow the following, otherwise high-energy proton transfer step. Even though the iodine-based halogen bonding interaction is stronger than the tellurium-based chalcogen bonding one, which makes the former a stronger Lewis acid and hence in principle a more efficient catalyst, solvation effects explain the smaller energy span of the latter.
ABSTRACT
The deposition of metal oxides is essential to the fabrication of numerous multicomponent solid-state devices and catalysts. However, the reproducible formation of homogeneous metal oxide films or of nanoparticle dispersions at solid interfaces remains an ongoing challenge. Here we report that molecular hexaniobate cluster anion complexes of structurally and electronically distinct fragments of cubic-spinel and monoclinic Co3O4 can serve as tractable yet well-defined functional analogues of bulk cobalt oxide. Notably, the energies of the highest-occupied and lowest-unoccupied molecular orbitals (HOMO and LUMO) of the molecular complexes, 1, closely match the valence- and conduction-band (VB and CB) energies of the parent bulk oxides. Use of 1 as a molecular analogue of the parent oxides is demonstrated by its remarkably simple deployment as a cocatalyst for direct Z-scheme reduction of CO2 by solar light and water. Namely, evaporation of an aqueous solution of 1 on TiO2-coated fluorinated tin oxide windows (TiO2/FTO), immersion in wet acetonitrile, and irradiation by simulated solar light under an atmosphere of CO2 give H2, CO, and CH4 in ratios nearly identical to those obtained using 20 nm spinel-Co3O4 nanocrystals, but 15 times more rapidly on a Co basis and more rapidly overall than other reported systems. Detailed investigation of the photocatalytic properties of 1 on TiO2/FTO includes confirmation of a direct Z-scheme charge-carrier migration pathway by in situ irradiated X-ray photoelectron spectroscopy. More generally, the findings point to a potentially important new role for coordination chemistry that bridges the conceptual divide between molecular and solid-state science.
ABSTRACT
Hole interactions are known by different names depending on the key atom of the bond (halogen bond, chalcogen bond, hydrogen bond, etc.), and the geometry of the interaction (σ if in line, π if perpendicular to the Lewis acid plane). However, its origin starts with the creation of a Lewis acid by an underlying covalent bond, which forms an electrostatic depletion and a virtual antibonding orbital, which can create non-covalent interactions with Lewis bases. In this (maybe subjective) perspective, we will claim that hole interactions must be defined via the molecular orbital origin of the molecule. Under this premise we can better explore the richness of such bonding patterns. For that, we will study old, recent and new systems, trying to pinpoint some misinterpretations that are often associated with them. We will use as exemplars the triel bonds, a couple of metal complexes, a discussion on convergent σ-holes, and many cases of anti-electrostatic hole interactions.
ABSTRACT
The 21-homododecahedryl cation is a unique system in terms of its complete fluxionality based on two different rearrangements. In this work, we report the quantum tunneling effects that drive the reactions at temperatures where the semi-classical kinetics are impossible. We postulate that the tunnel effect in this system can serve to create a refrigerator that may operate at arbitrarily low temperatures.
ABSTRACT
Some nitrile-boron halide adducts exhibit a double-well potential energy surface with two distinct minima: a "long bond" geometry (LB, a van der Waals interaction mostly based on electrostatics, but including a residual charge transfer component) and a "short bond" structure (SB, a covalent dative bond). This behavior can be considered as a "weak" form of bond stretch isomerism. Our computations reveal that complexes RCN-BX3 (R=CH3 , FCH2 , BrCH2 , and X=Cl, Br) exhibit a fast interconversion from LB to SB geometries even close to the absolute zero thanks to a boron atom tunneling mechanism. The computed half-lives of the meta-stable LB compounds vary between minutes to nanoseconds at cryogenic conditions. Accordingly, we predict that the long bond structures are practically impossible to isolate or characterize, which agrees with previous matrix-isolation experiments.
ABSTRACT
To predict barrier heights at low temperatures, it is not enough to employ highly accurate electronic structure methods. We discuss the influence of quantum tunnelling on the comparison of experimental and theoretical activation parameters (Ea, ΔH, ΔG, or ΔS), since the slope-based experimental techniques to obtain them completely neglect the tunnelling component. The intramolecular degenerate rearrangement of four fluxional molecules (bullvalene, barbaralane, semibullvalene, and norbornadienylidene) were considered, systems that cover the range between fast deep tunneling and small but significant shallow tunnelling correction. The barriers were computed with the composite W3lite-F12 method at the CCSDT(Q)/CBS level, and the tunnelling contribution with small curvature tunnelling. While at room temperature the effect is small (â¼1 kJ mol-1), at low temperatures it can be considerable (in the order of tens of kJ mol-1 at â¼80 K).
ABSTRACT
A trifluoromethyl sulfur-chelated ruthenium benzylidene, Ru-S-CF3 -I, was synthesized and characterized. This latent precatalyst provides a distinct activity and selectivity profiles for olefin metathesis reactions depending on the substrate. For example, 1,3-divinyl-hexahydropentalene derivatives were efficiently obtained by ring-opening metathesis (ROM) of dicyclopentadiene (DCPD). Ru-S-CF3 -I also presented a much more effective photoisomerization process from the inactive cis-diiodo to the active trans-diiodo configuration after exposure to 510â nm (green light), allowing for a wide scope of photoinduced olefin metathesis reactions. DFT calculations suggest a faster formation and enhanced stability of the active trans-diiodo species of Ru-S-CF3 -I compared with Ru-S-Ph-I, explaining its higher reactivity. In addition, the photochemical release of chloride anions by irradiation of Cl-BODIPY in the presence of DCPD derivatives with diiodo Ru benzylidenes, led to in situ generation of chloride complexes, which quickly produced the corresponding cross-linked polymers. Thus, novel selective pathways that use visible light to guide olefin metathesis based synthetic sequences is presented.
ABSTRACT
A combined experimental and density functional theory (DFT) investigation was employed in order to examine the mechanism of electrochemical CO2 reduction and H2 formation from water reduction in neutral aqueous solutions. A water soluble cobalt porphyrin, cobalt [5,10,15,20-(tetra-N-methyl-4-pyridyl)porphyrin], (CoTMPyP), was used as catalyst. The possible attachment of different axial ligands as well as their effect on the electrocatalytic cycles were examined. A cobalt porphyrin hydride is a key intermediate which is generated after the initial reduction of the catalyst. The hydride is involved in the formation of H2 and formate and acts as an indirect proton source for the formation of CO in these H+ -starving conditions. The experimental results are in agreement with the computations and give new insights into electrocatalytic mechanisms involving water soluble metalloporphyrins. We conclude that in addition to the porphyrin's structure and metal ion center, the electrolyte surroundings play a key role in dictating the products of CO2 /H2 O reduction.
ABSTRACT
The uncertainty on XeF6 geometry persisted for over five decades, with elusive multiple C3v equivalent minima as an outcome of the Jahn-Teller effect. Herein we theoretically prove that XeF6 shows a genuine fluorine quantum mechanical tunnelling rearrangement, rapidly "jumping" between isomers even close to 0 K. The isoelectronic anions IF6- and TeF62- behave in the same way as XeF6, but with a lower and shorter energetical barrier they have a faster tunnelling rate. A complete isotopic analysis revealed a large k(18F)/k(19F) kinetic isotope effect. We speculate that it would be possible to experimentally observe the tunnel effect in XeF6 by means of cryogenic NMR or IR.
ABSTRACT
Triplet cyclopentane-1,3-diyl diradical (T-DR) was generated via photolysis of 2,3-diazabicyclo[2.2.1]hept-2-ene (AZ) under low-temperature matrix conditions. Temperature independency of T-DR decay and the kinetic isotope effect of T-DR-d6 provided experimental evidence in favor of heavy-atom (carbon) tunneling process during the decay of T-DR to bicyclo[2.1.0]pentane (CP) via singlet S-DR. For the first time, the formation of CP was confirmed using low-temperature infrared spectra. Computations of the heavy-atom tunneling process using the small-curvature tunneling method demonstrated a fast reaction from S-DR to CP. Moreover, we observed heavy-atom tunneling during denitrogenation of AZ. Stereoselectivity in the tunneling process of T-DR-d6 was observed at 7 K to form retention-CP-d6 in higher amounts compared to inversion-CP-d6. Photolysis of AZ-d6 yielded inv-CP-d6 and ret-CP-d6 in environment- and temperature-dependent ratios. Moreover, because of the prominent matrix effect, T-DR decayed more rapidly in Ar than in glassy organic matrices.