Facilitating Atom Probe Tomography of 2D MXene Films by In Situ Sputtering.

2D materials are emerging as promising nanomaterials for applications in energy storage and catalysis. In the wet chemical synthesis of MXenes, these 2D transition metal carbides and nitrides are terminated with a variety of functional groups, and cations such as Li+ are often used to intercalate into the structure to obtain exfoliated nanosheets. Given the various elements involved in their synthesis, it is crucial to determine the detailed chemical composition of the final product, in order to better assess and understand the relationships between composition and properties of these materials. To facilitate atom probe tomography analysis of these materials, a revised specimen preparation method is presented in this study. A colloidal Ti3C2Tz MXene solution was processed into an additive-free free-standing film and specimens were prepared using a dual beam scanning electron microscope/focused ion beam. To mechanically stabilize the fragile specimens, they were coated using an in situ sputtering technique. As various 2D material inks can be processed into such free-standing films, the presented approach is pivotal for enabling atom probe analysis of other 2D materials.

In Situ Metallic Coating of Atom Probe Specimen for Enhanced Yield, Performance, and Increased Field-of-View.

Atom probe tomography requires needle-shaped specimens with a diameter typically below 100 nm, making them both very fragile and reactive, and defects (notches at grain boundaries or precipitates) are known to affect the yield and data quality. The use of a conformal coating directly on the sharpened specimen has been proposed to increase yield and reduce background. However, to date, these coatings have been applied ex situ and mostly are not uniform. Here, we report on the controlled focused-ion beam in situ deposition of a thin metal film on specimens immediately after specimen preparation. Different metallic targets e.g. Cr were attached to a micromanipulator via a conventional lift-out method and sputtered using Ga or Xe ions. We showcase the many advantages of coating specimens from metallic to nonmetallic materials. We have identified an increase in data quality and yield, an improvement of the mass resolution, as well as an increase in the effective field-of-view. This wider field-of-view enables visualization of the entire original specimen, allowing to detect the complete surface oxide layer around the specimen. The ease of implementation of the approach makes it very attractive for generalizing its use across a very wide range of atom probe analyses.

Near-Atomic-Scale Perspective on the Oxidation of Ti3 C2 Tx MXenes: Insights from Atom Probe Tomography.

MXenes are a family of 2D transition metal carbides and nitrides with remarkable properties, bearing great potential for energy storage and catalysis applications. However, their oxidation behavior is not yet fully understood, and there are still open questions regarding the spatial distribution and precise quantification of surface terminations, intercalated ions, and possible uncontrolled impurities incorporated during synthesis and processing. Here, atom probe tomography (APT) analysis of as-synthesized Ti3 C2 Tx MXenes reveals the presence of alkali (Li, Na) and halogen (Cl, F) elements as well as unetched Al. Following oxidation of the colloidal solution of MXenes, it is observed that the alkalis are enriched in TiO2 nanowires. Although these elements are tolerated through the incorporation by wet chemical synthesis, they are often overlooked when the activity of these materials is considered, particularly during catalytic testing. This work demonstrates how the capability of APT to image these elements in 3D at the near-atomic scale can help to better understand the activity and degradation of MXenes, in order to guide their synthesis for superior functional properties.

Molecular rare-earth-metal hydrides in non-cyclopentadienyl environments.

Molecular hydrides of the rare-earth metals play an important role as homogeneous catalysts and as counterparts of solid-state interstitial hydrides. Structurally well-characterized non-metallocene-type hydride complexes allow the study of elementary reactions that occur at rare-earth-metal centers and of catalytic reactions involving bonds between rare-earth metals and hydrides. In addition to neutral hydrides, cationic derivatives have now become available.

Validated in vitro/in vivo correlation of prolonged-release oxycodone/naloxone with differing dissolution rates in relation to gastrointestinal transit times.

OBJECTIVES: To formally establish the relationship between oxycodone dissolution, in vitro, from a prolonged-release, oral, combination of oxycodone and naloxone (OXN PR) tablets with in vivo absorption, by developing a validated Level A in vitro/in vivo correlation (IVIVC) and subsequently ascertaining the temporal absorption of oxycodone during gastrointestinal transit. METHODS: In vitro dissolution data from formulations of OXN PR (20/10 mg) tablets with slow, medium and fast dissolution rates were generated using United States Pharmacopeia I apparatus 2 (paddle at 50 rpm) in simulated gastric fluid, pH 1.2. These batches were administered to healthy volunteers and plasma concentration data were collected during a randomised, open-label, cross-over study. A Level A correlation was established for oxycodone through the determination of in vivo absorption profiles obtained by deconvolution of plasma concentrations with in vitro dissolution data. The IVIVC model was validated using the internal predictability assessment. RESULTS: A Level A correlation between the in vitro and in vivo release data was established. The polynomial function describing the IVIVC produced a goodness of fit (R(2)) of 0.99. CONCLUSIONS: The rate of absorption of oxycodone from OXN PR tablets correlated well with the in vitro release rates, demonstrating that a Level A IVIVC with internal predictability has been successfully developed for OXN PR tablets. In conjunction with a previous gastrointestinal transit study, this report demonstrates that the majority of oxycodone enters the circulation before reaching the colon, thus it is important that naloxone counteracts opioid-induced bowel dysfunction throughout the entire gut.

Cationic methyl complexes of the rare-earth metals: an experimental and computational study on synthesis, structure, and reactivity.

Synthesis, structure, and reactivity of two families of rare-earth metal complexes containing discrete methyl cations [LnMe(2-x)(thf)n]((1+x)+) (x = 0, 1; thf = tetrahydrofuran) have been studied. As a synthetic equivalent for the elusive trimethyl complex [LnMe3], lithium methylates of the approximate composition [Li3LnMe6(thf)n] were prepared by treating rare-earth metal trichlorides [LnCl3(thf)n] with 6 equiv of methyllithium in diethyl ether. Heteronuclear complexes of the formula [Li3Ln2Me9L(n)] (Ln = Sc, Y, Tb; L = Et2O, thf) were isolated by crystallization from diethyl ether. Single crystal X-ray diffraction studies revealed a heterometallic aggregate of composition [Li3Ln2Me9(thf)n(Et2O)m] with a [LiLn2Me9](2-) core (Ln = Sc, Y, Tb). When tris(tetramethylaluminate) [Ln(AlMe4)3] (Ln = Y, Lu) was reacted with less than 1 equiv of [NR3H][BPh4], the dimethyl cations [LnMe2(thf)n][BPh4] were obtained. The coordination number as well as cis/trans isomer preference was studied by crystallographic and computational methods. Dicationic methyl complexes of the rare-earth metals of the formula [LnMe(thf)n][BAr4]2 (Ln = Sc, Y, La-Nd, Sm, Gd-Lu; Ar = Ph, C6H4F-4) were synthesized, by protonolysis of either the ate complex [Li3LnMe6(thf)n] (Ln = Sc, Y, Gd-Lu) or the tris(tetramethylaluminate) [Ln(AlMe4)3] (Ln = La-Nd, Sm, Dy, Gd) with ammonium borates [NR3H][BAr4] in thf. The number of coordinated thf ligands varied from n = 5 (Ln = Sc, Tm) to n = 6 (Ln = La, Y, Sm, Dy, Ho). The configuration of representative examples was determined by X-ray diffraction studies and confirmed by density-functional theory calculations. The highly polarized bonding between the methyl group and the rare-earth metal center results in the reactivity pattern dominated by the carbanionic character and the pronounced Lewis acidity: The dicationic methyl complex [YMe(thf)6](2+) inserted benzophenone as an electrophile to give the alkoxy complex [Y(OCMePh2)(thf)5](2+). Nucleophilic addition of the soft anion X(-) (X(-) = I(-), BH4(-)) led to the monocationic methyl complexes [YMe(X)(thf)5](+).

Optimizing electrode positions and analysis strategies for multifocal VEP recordings by ROC analysis.

The multifocal visual evoked potential (mfVEP) is an important tool to test visual pathway function. The aim of this study was to optimize electrode positions in mfVEP recordings. For analysis we applied a receiver operating characteristic (ROC), a method that inherently corrects for multiple testing. We found that a combination of two perpendicular derivations-both straddling the inion-was the most effective recording setup. Adding more than two derivations did not significantly increase the sensitivity. Thus optimal mfVEP detection can be achieved with a fairly simple recording setup which may facilitate mfVEP recordings in basic research and clinical routine.

Precision from drug stability studies. Investigation of reliable repeatability and intermediate precision of HPLC assay procedures.

A multi-company investigation is presented to obtain and compare precision results for LC assay procedures. Forty-four drug substances and drug products of various types subjected to 156 stability studies, with 2915 assay values in total, were included. This provides an excellent source of real long-term precision estimates, as the same analytical procedure was applied during the whole stability study, extending from 12 to 60 months. Intermediate precision was calculated either using the residual standard deviation of the regression line or applying an analysis of variances, depending on whether there was a significant degradation of the analyte or not. The results show impressively the large intervals where the individually calculated parameters scatter. Distribution ranges and averages for repeatability, intermediate precision, and the ratio between the two precision levels are mainly dependent on the type of drug product. Repeatabilities were found up to 0.8% for solutions, 1.6% for drug substances, 1.9% for tablets, 2.3% for creams, and 3.4% for a bath. For intermediate precision, which includes additional variability factors due to the reference standard, operator, equipment, reagents, etc., a similar dependency was obtained with a slightly changed order: up to 1.1% for drug substances, 2.2% for solutions, 2.3% for tablets, 3.1% for creams, and 3.2% for a bath. The ratio between the precision levels is up to 2.5 and similar for all investigated drug product types, apart from solutions with up to 5.3. These differences for the types of drug product may be explained by the influence of the sample and/or the sample preparation: the more complex, the higher the variability contribution. For the investigated examples, the impact of the analyte and of the concentration (dosage) seems to be of less importance. Therefore, a classification of drug product types for orientation on acceptable precision (ranges) for LC assay seems to be possible.

[Risk assessment of bluetongue disease incursion into Germany using geographic information system (GIS)]. / Risikoabschätzung zur Einschleppung der Bluetongue Disease nach Deutschland mit Hilfe eines Geographischen Informationssystems (GIS).

Using a geographic information system (GIS), by analysis of the relationship between the spatial distribution of cattle density and the risk factors temperature, altitude and rainfall, we defined geographical habitats enabling optimal development and competence of Culicoides spp. to transmit Bluetongue-Virus (BTV): Risk zones (low, high, highest risk) were identified mainly in Baden-Württemberg, Hessen and Rheinland-Pfalz if persistently infected ruminants are imported into these zones in summer (June to August mainly), based on the current climatic conditions, BTD outbreaks are considered a real possibility. Overwintering of the virus seems unlikely. However, global warming will lead to a steady increase of the size of the risk zones. In addition, the possibility of primary outbreaks increases. The reason for this is not only the expected northern shift of Culicoides imicola, but in addition an increasing vector competence of domestic Culicoides species. We therefore recommend the storage of vaccines as well as conducting ecological studies analysing the presence of Culicoides vectors. Using the data from these studies, it will be possible to produce updated quantitative risk assessment via GIS.