Photogating interfacial effects in carbon nanotube-based transistors on a Si/SiO2 substrate toward highly sensitive photodetection.

Single-walled carbon nanotubes (SWCNTs) are considered to be promising material platforms for various photodetectors (including phototransistors) due to their unique optoelectrical properties (e.g., high mobility and a wide variety of bandgap values). Herein, we present highly sensitive phototransistors which utilised sparse networks of SWCNTs on a silicon/silica substrate and operated by means of the photogating effect. The response of SWCNTs to photo-induced electrostatic charges (photogating effect) was highly dependent on the conductivity type of the channel, which was "metallic" or "semiconducting", depending on the SWCNT density. We determined the performance of these transistors depending on the characteristics of the substrate and conductivity type of the SWCNT channel. The optimized configuration of phototransistors with a channel comprising a sparse network of SWCNTs permitted improvement in the specific detectivity and relative response compared with previously reported photodetectors based on graphene and carbon nanotubes. We demonstrated an absolute responsivity of ∼60 A W-1 at an incident light power of ∼2 nW, specific detectivity of 7.8 × 1011 cm·Hz1/2 W-1, and response time of 300 µs. These data revealed the high potential of photogating-based SWCNTs detectors for extremely weak signals with a high signal-to-noise ratio.

Robust method for uniform coating of carbon nanotubes with V2O5 for next-generation transparent electrodes and Li-ion batteries.

Composites comprising vanadium-pentoxide (V2O5) and single-walled carbon nanotubes (SWCNTs) are promising components for emerging applications in optoelectronics, solar cells, chemical and electrochemical sensors, etc. We propose a novel, simple, and facile approach for SWCNT covering with V2O5 by spin coating under ambient conditions. With the hydrolysis-polycondensation of the precursor (vanadyl triisopropoxide) directly on the surface of SWCNTs, the nm-thick layer of oxide is amorphous with a work function of 4.8 eV. The material recrystallizes after thermal treatment at 600 °C, achieving the work function of 5.8 eV. The key advantages of the method are that the obtained coating is uniform with a tunable thickness and does not require vacuuming or heating during processing. We demonstrate the groundbreaking results for two V2O5/SWCNT applications: transparent electrode and cathode for Li-ion batteries. As a transparent electrode, the composite shows stable sheet resistance of 160 Ω sq-1 at a 90% transmittance (550 nm) - the best performance reported for SWCNTs doped by metal oxides. As a cathode material, the obtained specific capacity (330 mA h g-1) is the highest among all the other V2O5/SWCNT cathodes reported so far. This approach opens new horizons for the creation of the next generation of metal oxide composites for various applications, including optoelectronics and electrochemistry.

Hybrid Silicon Nitride Photonic Integrated Circuits Covered by Single-Walled Carbon Nanotube Films.

The integration of low-dimensional materials with optical waveguides presents promising opportunities for enhancing light manipulation in passive photonic circuits. In this study, we investigate the potential of aerosol-synthesized single-walled carbon nanotube (SWCNT) films for silicon nitride photonic circuits as a basis for developing integrated optics devices. Specifically, by measuring the optical response of SWCNT-covered waveguides, we retrieve the main SWCNT film parameters, such as absorption, nonlinear refractive, and thermo-optic coefficients, and we demonstrate the enhancement of all-optical wavelength conversion and the photoresponse with a 1.2 GHz bandwidth.

Role of Hydrogen in Ethylene-Based Synthesis of Single-Walled Carbon Nanotubes.

We examined the effect of hydrogen on the growth of single-walled carbon nanotubes in the aerosol (a specific case of the floating catalyst) chemical vapor deposition process using ethylene as a carbon source and ferrocene as a precursor for a Fe-based catalyst. With a comprehensive set of physical methods (UV-vis-NIR and Raman spectroscopies, transmission electron microscopy, scanning electron microscopy, differential mobility analysis, and four-probe sheet resistance measurements), we showed hydrogen to inhibit ethylene pyrolysis extending the window of synthesis parameters. Moreover, the detailed study at different temperatures allowed us to distinguish three different regimes for the hydrogen effect: pyrolysis suppression at low concentrations (I) followed by surface cleaning/activation promotion (II), and surface blockage/nanotube etching (III) at the highest concentrations. We believe that such a detailed study will help to reveal the complex role of hydrogen and contribute toward the synthesis of single-walled carbon nanotubes with detailed characteristics.

Dumbbell-Shaped Ho-Doped Fiber Laser Mode-Locked by Polymer-Free Single-Walled Carbon Nanotubes Saturable Absorber.

We propose a simple dumbbell-shaped scheme of a Holmium-doped fiber laser incorporating a minimum number of optical elements. Mode-locking regimes were realized with the help of polymer-free single-walled carbon nanotubes (SWCNTs) synthesized using an aerosol (floating catalyst) CVD method. We show that such a laser scheme is structurally simple and more efficient than a conventional one using a ring cavity and a similar set of optical elements. In addition, we investigated the effect of SWCNT film transmittance, defined by the number of 40 nm SWCNT layers on the laser's performance: operating regimes, stability, and self-starting. We found that three SWCNT layers with an initial transmittance of about 40% allow stable self-starting soliton mode-locking at a wavelength of 2076 nm with a single pulse energy of 0.6 nJ and a signal-to-noise ratio of more than 60 dB to be achieved.

Bithiophene as a Sulfur-Based Promotor for the Synthesis of Carbon Nanotubes and Carbon-Carbon Composites.

We assess bithiophene (C8H6S2) as a novel sulfur-based promotor for the growth of single-walled carbon nanotubes (SWCNTs) in the aerosol (floating catalyst) CVD method. Technologically suitable equilibrium vapor pressure and an excess of hydrocarbon residuals formed under its decomposition make bithiophene an attractive promoter for the production of carbon nanotubes in general and specifically for ferrocene-based SWCNT growth. Indeed, we detect a moderate enhancement in the carbon nanotube yield and a decrease in the equivalent sheet resistance of the films at a low bithiophene content, indicating the improvement of the product properties. Moreover, the relatively high concentrations and low temperature stability of bithiophene result in non-catalytical decomposition, leading to the formation of pyrolytic carbon deposits; the deposits appear as few-layer graphene structures. Thus, bithiophene pyrolysis opens a route for the cheap production of hierarchical composite thin films comprising carbon nanotubes and few-layer graphene, which might be of practical use for hierarchical adsorbents, protective membranes, or electrocatalysis.

Tuning the Optical Properties and Conductivity of Bundles in Networks of Single-Walled Carbon Nanotubes.

The films of single-walled carbon nanotubes (SWCNTs) are a promising material for flexible transparent electrodes, which performance depends not only on the properties of individual nanotubes but also, foremost, on bundling of individual nanotubes. This work investigates the impact of densification on optical and electronic properties of SWCNT bundles and fabricated films. Our ab initio analysis shows that the optimally densified bundles, consisting of a mixture of quasi-metallic and semiconducting SWCNTs, demonstrate quasi-metallic behavior and can be considered as an effective conducting medium. Our density functional theory calculations indicate the band curving and bandgap narrowing with the reduction of the distance between nanotubes inside bundles. Simulation results are consistent with the observed conductivity improvement and shift of the absorption peaks in SWCNT films densified in isopropyl alcohol. Therefore, not only individual nanotubes but also the bundles should be considered as building blocks for high-performance transparent conductive SWCNT-based films.

Albumin Stabilized Fe@C Core-Shell Nanoparticles as Candidates for Magnetic Hyperthermia Therapy.

Carbon-encapsulated iron nanoparticles (Fe@C) with a mean diameter of 15 nm have been synthesized using evaporation-condensation flow-levitation method by the direct iron-carbon gas-phase reaction at high temperatures. Further, Fe@C were stabilized with bovine serum albumin (BSA) coating, and their electromagnetic properties were evaluated to test their performance in magnetic hyperthermia therapy (MHT) through a specific absorption rate (SAR). Heat generation was observed at different Fe@C concentrations (1, 2.5, and 5 mg/mL) when applied 331 kHz and 60 kA/m of an alternating magnetic field, resulting in SAR values of 437.64, 129.36, and 50.4 W/g for each concentration, respectively. Having such high SAR values at low concentrations, obtained material is ideal for use in MHT.

Multifunctional Elastic Nanocomposites with Extremely Low Concentrations of Single-Walled Carbon Nanotubes.

Stretchable and flexible electronics has attracted broad attention over the last years. Nanocomposites based on elastomers and carbon nanotubes are a promising material for soft electronic applications. Despite the fact that single-walled carbon nanotube (SWCNT) based nanocomposites often demonstrate superior properties, the vast majority of the studies were devoted to those based on multiwalled carbon nanotubes (MWCNTs) mainly because of their higher availability and easier processing procedures. Moreover, high weight concentrations of MWCNTs are often required for high performance of the nanocomposites in electronic applications. Inspired by the recent drop in the SWCNT price, we have focused on fabrication of elastic nanocomposites with very low concentrations of SWCNTs to reduce the cost of nanocomposites further. In this work, we use a fast method of coagulation (antisolvent) precipitation to fabricate elastic composites based on thermoplastic polyurethane (TPU) and SWCNTs with a homogeneous distribution of SWCNTs in bulk TPU. Applicability of the approach is confirmed by extra low percolation threshold of 0.006 wt % and, as a consequence, by the state-of-the-art performance of fabricated elastic nanocomposites at very low SWCNT concentrations for strain sensing (gauge factor of 82 at 0.05 wt %) and EMI shielding (efficiency of 30 dB mm-1 at 0.01 wt %).

High-Quality Graphene Using Boudouard Reaction.

Following the game-changing high-pressure CO (HiPco) process that established the first facile route toward large-scale production of single-walled carbon nanotubes, CO synthesis of cm-sized graphene crystals of ultra-high purity grown during tens of minutes is proposed. The Boudouard reaction serves for the first time to produce individual monolayer structures on the surface of a metal catalyst, thereby providing a chemical vapor deposition technique free from molecular and atomic hydrogen as well as vacuum conditions. This approach facilitates inhibition of the graphene nucleation from the CO/CO2 mixture and maintains a high growth rate of graphene seeds reaching large-scale monocrystals. Unique features of the Boudouard reaction coupled with CO-driven catalyst engineering ensure not only suppression of the second layer growth but also provide a simple and reliable technique for surface cleaning. Aside from being a novel carbon source, carbon monoxide ensures peculiar modification of catalyst and in general opens avenues for breakthrough graphene-catalyst composite production.

Red GaPAs/GaP Nanowire-Based Flexible Light-Emitting Diodes.

We demonstrate flexible red light-emitting diodes based on axial GaPAs/GaP heterostructured nanowires embedded in polydimethylsiloxane membranes with transparent electrodes involving single-walled carbon nanotubes. The GaPAs/GaP axial nanowire arrays were grown by molecular beam epitaxy, encapsulated into a polydimethylsiloxane film, and then released from the growth substrate. The fabricated free-standing membrane of light-emitting diodes with contacts of single-walled carbon nanotube films has the main electroluminescence line at 670 nm. Membrane-based light-emitting diodes (LEDs) were compared with GaPAs/GaP NW array LED devices processed directly on Si growth substrate revealing similar electroluminescence properties. Demonstrated membrane-based red LEDs are opening an avenue for flexible full color inorganic devices.

Flexible Perovskite CsPbBr3 Light Emitting Devices Integrated with GaP Nanowire Arrays in Highly Transparent and Durable Functionalized Silicones.

The architecture of transparent contacts is of utmost importance for creation of efficient flexible light-emitting devices (LEDs) and other deformable electronic devices. We successfully combined the newly synthesized transparent and durable silicone rubbers and the semiconductor materials with original fabrication methods to design LEDs and demonstrate their significant flexibility. We developed electrodes based on a composite GaP nanowire-phenylethyl-functionalized silicone rubber membrane, improved with single-walled carbon nanotube films for a hybrid poly(ethylene oxide)-metal-halide perovskite (CsPbBr3) flexible green LED. The proposed approach provides a novel platform for fabrication of flexible hybrid optoelectronic devices.

Stretchable Transparent Light-Emitting Diodes Based on InGaN/GaN Quantum Well Microwires and Carbon Nanotube Films.

We propose and demonstrate both flexible and stretchable blue light-emitting diodes based on core/shell InGaN/GaN quantum well microwires embedded in polydimethylsiloxane membranes with strain-insensitive transparent electrodes involving single-walled carbon nanotubes. InGaN/GaN core-shell microwires were grown by metal-organic vapor phase epitaxy, encapsulated into a polydimethylsiloxane film, and then released from the growth substrate. The fabricated free-standing membrane of light-emitting diodes with contacts of single-walled carbon nanotube films can stand up to 20% stretching while maintaining efficient operation. Membrane-based LEDs show less than 15% degradation of electroluminescence intensity after 20 cycles of stretching thus opening an avenue for highly deformable inorganic devices.

Detecting cooking state of grilled chicken by electronic nose and computer vision techniques.

Determination of food doneness remains a challenge for automation in the cooking industry. The complex physicochemical processes that occur during cooking require a combination of several methods for their control. Herein, we utilized an electronic nose and computer vision to check the cooking state of grilled chicken. Thermogravimetry, differential mobility analysis, and mass spectrometry were employed to deepen the fundamental insights towards the grilling process. The results indicated that an electronic nose could distinguish the odor profile of the grilled chicken, whereas computer vision could identify discoloration of the chicken. The integration of these two methods yields greater selectivity towards the qualitative determination of chicken doneness. The odor profile is matched with detected water loss, and the release of aromatic and sulfur-containing compounds during cooking. This work demonstrates the practicability of the developed technique, which we compared with a sensory evaluation, for better deconvolution of food state during cooking.

Machine Learning for Tailoring Optoelectronic Properties of Single-Walled Carbon Nanotube Films.

A machine learning technique, namely, support vector regression, is implemented to enhance single-walled carbon nanotube (SWCNT) thin-film performance for transparent and conducting applications. We collected a comprehensive data set describing the influence of synthesis parameters (temperature and CO2 concentration) on the equivalent sheet resistance (at 90% transmittance in the visible light range) for SWCNT films obtained by a semi-industrial aerosol (floating-catalyst) CVD with CO as a carbon source and ferrocene as a catalyst precursor. The predictive model trained on the data set shows principal applicability of the method for refining synthesis conditions toward the advanced optoelectronic performance of multiparameter processes such as nanotube growth. Further doping of the improved carbon nanotube films with HAuCl4 results in the equivalent sheet resistance of 39 Ω/□-one of the lowest values achieved so far for SWCNT films.

Aerosol-Assisted Fine-Tuning of Optoelectrical Properties of SWCNT Films.

We propose a novel, scalable, and simple method for aerosol doping of single-walled carbon nanotube (SWCNT) films. This method is based on aerosolization of a dopant solution (HAuCl4 in ethanol) and time-controlled deposition of uniform aerosol particles on the nanotube film surface. The approach developed allows fine-tuning of the SWCNT work function in the range of 4.45 (for pristine nanotubes) to 5.46 eV, controllably varying the sheet resistance of the films from 79 to 3.2 Ω/□ for the SWCNT films with 50% transmittance (at 550 nm). This opens a new avenue for traditional and flexible optoelectronics, both to replace existing indium-tin oxide electrodes and to develop novel applications of the highly conductive transparent films.