Microfluidic Transfection System and Temperature Strongly Influence the Efficiency of Transient Transfection.

For the process of transient transfection (TTF), DNA is often transported into the cells using polyplexes. The polyplex uptake and the subsequent transient expression of the gene of interest are of great importance for a successful transfection. In this study, we investigated a 3D-printed microfluidic system designed to facilitate direct TTF for suspension of CHO-K1 cells. The results demonstrate that this system achieves significantly better results than the manual approach. Furthermore, the effect of both post-transfection incubation time (t) and temperature (T) on polyplex uptake was explored in light of the membrane phase transitions. Attention was paid to obtaining the highest possible transfection efficiency (TFE), viability (V), and viable cell concentration (VCC). Our results show that transfection output measured as product of VCC and TFE is optimal for t = 1 h at T = 22 °C. Moreover, post-transfection incubation at T = 22 °C with short periods of increased T at T = 40 °C were observed to further increase the output. Finally, we found that around T = 19 °C, the TFE increases strongly. This is the membrane phase transition T of CHO-K1 cells, and those results therefore suggest a correlation between membrane order and permeability (and in turn, TFE).

Peripheral blood derived endothelial colony forming cells as suitable cell source for pre-endothelialization of arterial vascular grafts under dynamic flow conditions.

In regenerative medicine, autologous peripheral blood derived endothelial colony forming cells (PB-derived ECFC) represent a promising source of endothelial cells (EC) for pre-endothelialization of arterial tissue engineered vascular grafts (TEVG) since they are readily attainable, can easily be isolated and possess a high proliferation potential. The aim of this study was to compare the phenotype of PB-derived ECFC with arterial and venous model cells such as human aortic endothelial cells (HAEC) and human umbilical vein endothelial cells (HUVEC) under dynamic cell culture conditions to find a suitable cell source of EC for pre-endothelialization. In this study PB-derived ECFC were cultivated over 24 h under a high pulsatile shear stress (20 dyn/cm2, 1 Hz) and subsequently analyzed. ECFC oriented and elongated in the direction of flow and expressed similar anti-thrombotic and endothelial differentiation markers compared to HAEC. There were significant differences observable in gene expression levels of CD31, CD34 and NOTCH4 between ECFC and HUVEC. These results therefore suggest an arterial phenotype for PB-derived ECFC both under static and flow conditions, and this was supported by NOTCH4 protein expression profiles. ECFC also significantly up-regulated gene expression levels of anti-thrombotic genes such as krueppel-like factor 2, endothelial nitric oxide synthase 3 and thrombomodulin under shear stress cultivation as compared to static conditions. Dynamically cultured PB-derived ECFC therefore may be a promising cell source for pre-endothelialization of arterial TEVGs.

Vascular implants - new aspects for in situ tissue engineering.

Conventional synthetic vascular grafts require ongoing anticoagulation, and autologous venous grafts are often not available in elderly patients. This review highlights the development of bioartificial vessels replacing brain-dead donor- or animal-deriving vessels with ongoing immune reactivity. The vision for such bio-hybrids exists in a combination of biodegradable scaffolds and seeding with immune-neutral cells, and here different cells sources such as autologous progenitor cells or stem cells are relevant. This kind of in situ tissue engineering depends on a suitable bioreactor system with elaborate monitoring systems, three-dimensional (3D) visualization and a potential of cell conditioning into the direction of the targeted vascular cell phenotype. Necessary bioreactor tools for dynamic and pulsatile cultivation are described. In addition, a concept for design of vasa vasorum is outlined, that is needed for sustainable nutrition of the wall structure in large caliber vessels. For scaffold design and cell adhesion additives, different materials and technologies are discussed. 3D printing is introduced as a relatively new field with promising prospects, for example, to create complex geometries or micro-structured surfaces for optimal cell adhesion and ingrowth in a standardized and custom designed procedure. Summarizing, a bio-hybrid vascular prosthesis from a controlled biotechnological process is thus coming more and more into view. It has the potential to withstand strict approval requirements applied for advanced therapy medicinal products.

A pre-conditioning protocol of peripheral blood derived endothelial colony forming cells for endothelialization of tissue engineered constructs.

In regenerative medicine, autologous endothelial colony forming cells (ECFCs) bear the greatest potential to be used for surface endothelialization of tissue engineered constructs, as they are easily attainable and possess a high proliferation rate. The aim of this study was to develop a standardized pre-conditioning protocol under dynamic conditions simulating the physiology of human circulation to improve the formation of a flow resistant monolayer of ECFCs and to enhance the antithrombogenicity of the endothelial cells. The main focus of the study was to consequently compare the cellular behavior under a steady laminar flow against a pulsatile flow. Mononuclear cells were isolated out of peripheral blood (PB) buffy coats and plated on uncoated tissue culture flasks in anticipation of guidelines for Advanced Therapy Medicinal Products. ECFCs were identified by typical surface markers such as CD31, CD146 and VE-Cadherin. To explore the effects of dynamic cultivation, ECFCs and human umbilical vein endothelial cells were comparatively cultured under either laminar or pulsatile (1 Hz) flow conditions with different grades of shear stress (5 dyn/cm2versus 20 dyn/cm2). High shear stress of 20 dyn/cm2 led to a significant upregulation of the antithrombotic gene marker thrombomodulin in both cell types, but only ECFCs orientated and elongated significantly after shear stress application forming a confluent endothelial cell layer. The work therefore documents a suitable protocol to pre-condition PB-derived ECFCs for sustainable endothelialization of blood contacting surfaces and provides essential knowledge for future cultivations in bioreactor systems.

Automated Bioreactor System for the Cultivation of Autologous Tissue-Engineered Vascular Grafts.

In an aging society, diseases associated with irreversible damage of organs are frequent. An increasing percentage of patients requires bioartificial tissue or organ substitutes. Tissue engineering products depend on a well-defined process to ensure successful cultivation while meeting high regulatory demands. The goal of the presented work is the development of a bioreactor system for the cultivation of tissue-engineered vascular grafts (TEVGs) for autologous implantation and transition from a lab scale setup to standardized production. Key characteristics include (i) the automated reliable monitoring and control of a wide-range of parameters regarding implant conditioning, (ii) easy and sterile setup and operation, (iii) reasonable costs of disposables, and (iv) parallelization of automated cultivation processes. The presented prototype bioreactor system provides comprehensive physiologically conditioning, sensing, and imaging functionality to meet all requirements for the successful cultivation of vascular grafts on a productional scale.