Thermal pyrolysis of waste versus virgin polyolefin feedstocks: The role of pressure, temperature and waste composition.

Due to the complexity and diversity of polyolefinic plastic waste streams and the inherent non-selective nature of the pyrolysis chemistry, the chemical decomposition of plastic waste is still not fully understood. Accurate data of feedstock and products that also consider impurities is, in this context, quite scarce. Therefore this work focuses on the thermochemical recycling via pyrolysis of different virgin and contaminated waste-derived polyolefin feedstocks (i.e., low-density polyethylene (LDPE), polypropylene (PP) as main components), along with an investigation of the decomposition mechanisms based on the detailed composition of the pyrolysis oils. Crucial in this work is the detailed chemical analysis of the resulting pyrolysis oils by comprehensive two-dimensional gas chromatography (GC × GC) and ICP-OES, among others. Different feedstocks were pyrolyzed at a temperature range of 430-490 °C and at pressures between 0.1 and 2 bar in a continuous pilot-scale pyrolysis unit. At the lowest pressure, the pyrolysis oil yield of the studied polyolefins reached up to 95 wt%. The pyrolysis oil consists of primarily α-olefins (37-42 %) and n-paraffins (32-35 %) for LDPE pyrolysis, while isoolefins (mostly C9 and C15) and diolefins accounted for 84-91 % of the PP-based pyrolysis oils. The post-consumer waste feedstocks led to significantly less pyrolysis oil yields and more char formation compared to their virgin equivalents. It was found that plastic aging, polyvinyl chloride (PVC) (3 wt%), and metal contamination were the main causes of char formation during the pyrolysis of polyolefin waste (4.9 wt%).

Assessing the feasibility of chemical recycling via steam cracking of untreated plastic waste pyrolysis oils: Feedstock impurities, product yields and coke formation.

Chemical recycling of plastic waste to base chemicals via pyrolysis and subsequent steam cracking of pyrolysis oils shows great potential to overcome the limitations in present means of plastic waste recycling. In this scenario, the largest concern is the feasibility. Are plastic waste pyrolysis products acceptable steam cracking feedstocks in terms of composition, product yields and coke formation? In this work, steam cracking of two post-consumer plastic waste pyrolysis oils blended with fossil naphtha was performed in a continuous bench-scale unit without prior treatment. Product yields and radiant coil coke formation were benchmarked to fossil naphtha as an industrial feedstock. Additionally, the plastic waste pyrolysis oils were thoroughly characterized. Analyses included two dimensional gas chromatography coupled to a flame ionization detector for the detailed hydrocarbon composition as well as specific analyses for heteroatoms, halogens and metals. It was found that both pyrolysis oils are rich in olefins (∼48 wt%) and that the main impurities are nitrogen, oxygen, chlorine, bromine, aluminum, calcium and sodium. Steam cracking of the plastic waste derived feedstocks led to ethylene yields of ∼23 wt% at a coil outlet temperature of 820 °C and ∼28 wt% at 850 °C, exceeding the ethylene yield of pure naphtha at both conditions (∼22 wt% and ∼27 wt%, respectively). High amounts of heavy products were formed when steam cracking both pyrolysis oils, respectively. Furthermore, a substantial coking tendency was observed for the more contaminated pyrolysis oil, indicating that next to unsaturated hydrocarbons, contaminants are a strong driver for coke formation.

Pyrolysis of end-of-life polystyrene in a pilot-scale reactor: Maximizing styrene production.

Chemical recycling of polystyrene (PS) via pyrolysis is of great industrial, and academic interest, with styrene being the primary product of interest. To identify the optimal process conditions, the pyrolysis of end-of-life PS was studied in a pilot-scale unit consisting of an extruder, and a continuous stirred tank reactor (CSTR). The PS was pyrolyzed with continuous feeding at a pressure range from 0.02 to 1.0bara, and a temperature range from 450 to 600 °C, giving primarily styrene, other mono-aromatics, and oligomers. The comprehensive two-dimensional gas chromatography (GC × GC) coupled with flame ionization detector (FID), and time-of-flight mass spectrometer (ToF-MS) as well as GC with thermal conductivity detector (TCD) were used to characterize the liquid, and gaseous products exhaustively. The styrene yield increased from 36 wt% at 1.0bara, and 450 °C to 56 wt% at 0.02bara, and 550 °C. Working under a vacuum enhanced the styrene recovery at all corresponding temperature levels. The yield of benzene, toluene, ethylbenzene, and xylene (BTEX) increased from 4 wt% at 450 °C, and 0.02 bara to 17 wt% at 450 °C, and 1.0 bara. The experimental results have been used in a mathematical model that can explain the combined effect of temperature, and pressure on the yield of the primary products. The present work illustrates the potential of a continuous pyrolysis process for end-of-life PS, and paves the way for this technology to be rapidly transferred from mere laboratory use to industrial processes in the circular (petro-) chemical industry.