An Integrated 3-Dimentional Navigation System Increases the Accuracy, Efficiency, and Safety of Percutaneous Thoracolumbar Pedicle Screw Placement in Minimally Invasive Approaches: A Randomized Cadaveric Study.

STUDY DESIGN: Cadaveric study. OBJECTIVES: The purpose of this study was to compare a novel, integrated 3D navigational system (NAV) and conventional fluoroscopy in the accuracy, efficiency, and radiation exposure of thoracolumbar percutaneous pedicle screw (PPS) placement. METHODS: Twelve skeletally mature cadaveric specimens were obtained for twelve individual surgeons. Each participant placed bilateral PS at 11 segments, from T8 to S1. Prior to insertion, surgeons were randomized to the sequence of techniques and the side (left or right). Following placement, a CT scan of the spine was obtained for each cadaver, and an independent reviewer assessed the accuracy of screw placement using the Gertzbein grading system. Outcome metrics of interest included a comparison of breach incidence/severity, screw placement time, total procedure time, and radiation exposure between the techniques. Bivariate statistics were employed to compare outcomes at each level. RESULTS: A total of 262 screws (131 using each technique) were placed. The incidence of cortical breaches was significantly lower with NAV compared to FG (9% vs 18%; P = .048). Of breaches with NAV, 25% were graded as moderate or severe compared to 39% in the FG subgroup (P = .034). Median time for screw placement was significantly lower with NAV (2.7 vs 4.1 min/screw; P = .012), exclusive of registration time. Cumulative radiation exposure to the surgeon was significantly lower for NAV-guided placement (9.4 vs 134 µGy, P = .02). CONCLUSIONS: The use of NAV significantly decreased the incidence of cortical breaches, the severity of screw breeches, screw placement time, and radiation exposure to the surgeon when compared to traditional FG.

A Comparative Biomechanical Analysis of Stand Alone Versus Facet Screw and Pedicle Screw Augmented Lateral Interbody Arthrodesis: An In Vitro Human Cadaveric Model.

STUDY DESIGN: Cadaveric biomechanical study. OBJECTIVE: To investigate the kinematic response of a stand-alone lateral lumbar interbody cage compared with supplemental posterior fixation with either facet or pedicle screws after lateral discectomy. SUMMARY OF BACKGROUND DATA: Lateral interbody fusion is a promising minimally invasive fixation technique for lumbar interbody arthrodesis. The biomechanical stability of stand-alone cage placement compared with supplemental posterior fixation with either facet or bilateral pedicle screws remains unclear. METHODS: A 6-degree of freedom spine simulator was used to test flexibility in 7 human cadaveric specimens. Flexion-extension, lateral-bending, and axial-rotation were tested in the intact condition, followed by destabilization through a lateral discectomy at L2-L3 and L4-L5. Specimens were then reconstructed at both operative segments in the following sequence: (1) lateral interbody cage placement; (2) either Discovery facet screws or the Viper F2 system using a transfacet-pedicular trajectory randomized to L2-L3 or L4-L5; and (3) removal of facet screw fixation followed by placement of bilateral pedicle screw instrumentation. Acute range of motion (ROM) was quantified and analyzed. RESULTS: All 4 reconstruction groups, including stand-alone interbody cage placement, bilateral Discovery facet screws, the Viper F2 system, and bilateral pedicle screw-rod stabilization, resulted in a significant decrease in acute ROM in all loading modes tested (P<0.05). There were no significant differences observed between the 4 instrumentation groups (P>0.05). Although not statistically significant, the Viper F2 system resulted in greatest reduction of acute ROM in both flexion-extension and axial rotation versus all other treatments (P>0.05). CONCLUSIONS: Stand-alone interbody cage placement results in a significant reduction in acute ROM at the operative segment in the absence of posterior supplemental fixation. If added fixation is desired, facet screw placement, including the Viper F2 facet screw system using an integrated compression washer and transfacet-pedicular trajectory, provides similar acute stability to the spinal segment compared with traditional bilateral pedicle screw fixation in the setting of lateral interbody cage deployment.

A Clinical Perspective and Definition of Spinal Cord Injury.

Spinal cord injury (SCI) can be complete or incomplete. The level of injury in SCI is defined as the most caudal segment with motor function rated at greater than or equal to 3/5, with pain and temperature preserved. The standard neurological classification of SCI provided by the American Spinal Injury Association (ASIA) assigns grades from ASIA A (complete SCI) through ASIA E (normal sensory/motor), with B, C, and D representing varying degrees of injury between these extremes. The most common causes of SCI include trauma (motor vehicle accidents, sports, violence, falls), degenerative spinal disease, vascular injury (anterior spinal artery syndrome, epidural hematoma), tumor, infection (epidural abscess), and demyelinating processes (). (SDC Figure 1, http://links.lww.com/BRS/B91)(Figure is included in full-text article.).

Surgical anatomy of the diaphragm in the anterolateral approach to the spine: a cadaveric study.

STUDY DESIGN: Laboratory cadaveric study. OBJECTIVE: To delineate the pertinent surgical anatomy of the diaphragm during access to the anterolateral thoracolumbar junction. SUMMARY OF BACKGROUND DATA: The general anatomy of the thoracic diaphragm is well described. The specific surgical anatomy as it pertains to the lateral and thoracoabdominal approaches to the thoracolumbar junction is not well described. METHODS: Dissections were performed on adult fresh cadaveric specimens. Special attention was paid to the diaphragmatic attachments to the lower rib cage and to the spinal thoracolumbar junction. RESULTS: The pertinent diaphragmatic attachments to the rib cage are at the 11th and 12th ribs. Whether the diaphragm is incised or mobilized ventrally, the pertinent spinal attachments are the lateral and medial arcuate ligaments. Identifying and sectioning these structures allows for direct access to the thoracolumbar junction, particularly the L1 vertebral body. CONCLUSIONS: An understanding of the diaphragmatic-costal and diaphragmatic-spinal attachments is key for the safe and effective implementation of diaphragm mobilization during the lateral and thoracoabdominal approaches to the spine.

Comparative in vitro biomechanical analysis of a novel posterior cervical fixation technique versus conventional posterior-based constructs.

STUDY DESIGN: Comparative in vitro, cadaveric biomechanical study. OBJECTIVE: To compare the kinematic response of a new posterior cervical midline surgical technique versus that of conventional fixation techniques. SUMMARY OF BACKGROUND DATA: A new method was designed using alternating bilateral intralaminar screws connected with a single midline rod. This technique provides the theoretical benefits of less operative dissection and reduced implant cost, but the acute flexibility properties remain unknown. Using an in vitro cadaveric model, the study objective was to define the operative level(s) changes in multidirectional flexibility after posterior destabilization/reconstruction from C3 to C6. METHODS: A 6 degree of freedom spine stimulator was used to test flexibility in 7 human cadaveric specimens. Flexion-extension, lateral bending, and axial rotation were tested in the intact condition, followed by destabilization by a simulated posterior column injury from C3 to C6. Specimens were then reconstructed from C3 to C6 and tested in the following sequence: sublaminar hook rod (SH), lateral mass screw rod (LMR), midline laminectomy from C3 to C6 with LMR (MLR), and midline posterior fixation from C3 to C6 (SMF). Range of motion (ROM) and neutral zone were quantified and analyzed. RESULTS: Significant increases in ROM and neutral zone at C3 to C6 were found under all loading conditions for the destabilized condition and intact spine versus all other treatments (P<0.05). The conventional treatments: SH, LMR, and MLR resulted in significantly less ROM than the proposed SMF in flexion-extension and lateral bending (P<0.05). Axial rotation provided similar results; however, no differences were observed between the SH and SMF (P>0.05). Notably, LMR and MLR provided significantly more stability than SH in axial rotation (P<0.05). CONCLUSIONS: Data produced suggest that the new, midline rod fixation approach provides less biomechanical stability than conventional posterior cervical reconstruction techniques. In addition, the high incidence of laminar fracture during screw placement and close proximity of the screw trajectory and polyaxial heads to the dura suggest a practical limitation as well.

Cadaver training module for teaching thoracic pedicle screw placement to residents.

Surgical training using simulators has been shown to be highly effective but is not available for some applications and is too expensive for many programs. The authors piloted a cadaver-based module with the goal of objectively measuring and significantly improving orthopedic residents' surgical skills in placing thoracic pedicle screws, an advanced procedure. An experienced spine surgeon placed thoracic pedicle screws in 7 cadavers (T1-T12) to establish the skilled accuracy rate. For this pilot study, 3 orthopedic residents unfamiliar with the procedure were given didactic training for safe thoracic pedicle screw insertion. Each resident instrumented alternating sides of 5 consecutive cadavers (T1-T12). Screw positions were graded by computed tomography in a blinded fashion, with accuracy defined as no shank breach of the pedicle or vertebral body. Results were reviewed with the residents, instruction was repeated, and alternating sides of 5 cadavers were instrumented by the residents. The experienced surgeon accurately placed 67 (82%) of 82 pedicle screws. Residents accurately placed 80 (44%) of 180 pedicle screws in the initial set of specimens and 105 (58%) of 180 pedicle screws in the second set of specimens (P=.01). Accuracy varied significantly among residents before but not after computed tomography review. The study's results show that a cadaver-based training module that resembles the clinical setting can be used to teach complex surgical skills to orthopedic residents.

Neuronavigation in minimally invasive spine surgery.

OBJECT: Parallel advancements in image guidance technology and minimal access techniques continue to push the frontiers of minimally invasive spine surgery (MISS). While traditional intraoperative imaging remains widely used, newer platforms, such as 3D-fluoroscopy, cone-beam CT, and intraoperative CT/MRI, have enabled safer, more accurate instrumentation placement with less radiation exposure to the surgeon. The goal of this work is to provide a review of the current uses of advanced image guidance in MISS. METHODS: The authors searched PubMed for relevant articles concerning MISS, with particular attention to the use of image-guidance platforms. Pertinent studies published in English were further compiled and characterized into relevant analyses of MISS of the cervical, thoracic, and lumbosacral regions. RESULTS: Fifty-two studies were included for review. These describe the use of the iso-C system for 3D navigation during C1-2 transarticular screw placement, the use of endoscopic techniques in the cervical spine, and the role of navigation guidance at the occipital-cervical junction. The authors discuss the evolving literature concerning neuronavigation during pedicle screw placement in the thoracic and lumbar spine in the setting of infection, trauma, and deformity surgery and review the use of image guidance in transsacral approaches. CONCLUSIONS: Refinements in image-guidance technologies and minimal access techniques have converged on spinal pathology, affording patients the ability to undergo safe, accurate operations without the associated morbidities of conventional approaches. While percutaneous transpedicular screw placement is among the most common procedures to benefit from navigation, other areas of spine surgery can benefit from advances in neuronavigation and further growth in the field of image-guided MISS is anticipated.

The rib head as a landmark in the anterolateral approach to the thoracic spine: a computed tomography-based morphometric study.

OBJECT: The rib head is an important landmark in the anterolateral approach to the thoracic spine. Resection of the rib head is typically the first step in gaining access to the underlying pedicle and ultimately the spinal canal. The goal of this work is to quantify the relationship of the rib head to the spinal canal and adjacent aorta at each thoracic level using CT-based morphometric measurements. METHODS: One hundred thoracic spine CT scans (obtained in 50 male and 50 female subjects) were evaluated in this study. The width and depth of each vertebra body were measured from T-1 to T-12. In addition, the distance of each rib head to the spinal canal was determined by drawing a line connecting the rib heads bilaterally and measuring the distance to this line from the most ventral aspect of the spinal canal. Finally, the distance of the left rib head to the thoracic aorta was measured at each thoracic level below the aortic arch. RESULTS: The vertebral body depth progressively increased in a rostral to caudal direction. The vertebral body width was at its minimum at T-4 and progressively increased to T-12. The rib head extended beyond the spinal canal maximally at T-1. This distance incrementally decreased toward the caudal levels, with the tip of the rib head lying approximately even with the ventral canal at T-11 and T-12. The distance between the aorta and the left rib head increased in a rostral to caudal direction as well. CONCLUSIONS: The rib head is an important landmark in the anterolateral approach to the thoracic spine. At more cephalad levels, a larger portion of rib head requires resection to gain access to the spinal canal. At more caudad levels, there is a safer working distance between the rib head and aorta.

Ultrasonic BoneScalpel for osteoplastic laminoplasty in the resection of intradural spinal pathology: case series and technical note.

BACKGROUND: Osteoplastic laminoplasty is a well-described technique that may decrease the incidence of progressive kyphosis when used in the setting of intradural spinal cord tumor resection. OBJECTIVE: The BoneScalpel by Aesculap (Central Valley, Pennsylvania) is an ultrasonic osteotome that precisely cuts bone while preserving the underlying soft tissues, potentially reducing the risk of dural laceration during laminoplasty. By producing osteotomies as narrow as 0.5 mm, the device may also facilitate postoperative osteointegration. METHODS: A retrospective analysis was conducted of 40 patients (mean age, 38.0 years; range, 4.0-79.7 years) who underwent osteoplastic laminoplasty using the BoneScalpel for the treatment of intradural spinal pathology at the Johns Hopkins Hospital between January 2009 and December 2011. After lesion resection, titanium plates were used to reconstruct the lamina in all cases. The technical results and procedure-related complications were subsequently noted. RESULTS: Successful laminoplasty was carried out in all 40 patients. Intraoperatively, 1 case of incidental durotomy was noted after use of the device, which was repaired primarily without neurological or clinical sequelae. During the follow-up period (mean, 195 days; median, 144 days), there were 2 complications (1 cerebrospinal fluid leak, 1 seroma) and no cases of immediate postoperative instability. CONCLUSION: The BoneScalpel is a safe and technically feasible device for performing osteoplastic laminoplasty.

Mechanical airway obstruction due to dislodged spinal hardware.

A difficult airway caused by mechanical obstruction from dislodged spinal hardware in a patient undergoing revision surgery for a cervical chordoma is presented. Due to the logical, sequential multidisciplinary airway and patient management by the anesthesiology, neurosurgery, and otolaryngology teams working together in an environment of clear communication, a potential life-threatening crisis was averted with successful outcome for the patient.

Thromboembolic events and spinal surgery.

Management of patients undergoing neurosurgical spinal procedures requires balancing the competing risks of hemorrhage and thrombosis. Deep venous thrombosis (DVT) and pulmonary embolism (PE) may be significant complications following spinal surgery. The authors reviewed 30 studies regarding thromboembolic events following spinal surgery for various etiologies and analysed all the methods used to prevent thromboembolic events. Despite the low incidence of DVT (2.7%) and PE (2%), most spinal surgeons routinely treat patients with a non-invasive prophylactic method such as pneumatic sequential compression devices or compression stockings. Chemoprophylaxis is another effective method to prevent thromboembolic episodes. Inferior vena cava filters may be a safe and effective method to prevent thromboembolic episodes in this patient cohort when chemoprophylaxis and mechanical compression is contraindicated.

Adjacent-level range of motion and intradiscal pressure after posterior cervical decompression and fixation: an in vitro human cadaveric model.

STUDY DESIGN: This in vitro human cadaveric study measured adjacent-level kinematics after posterior cervical decompression and fixation. OBJECTIVE: Quantify adjacent-level changes in range of motion (ROM) and intradiscal pressure after posterior cervical decompression and fixation. SUMMARY OF BACKGROUND DATA: Optimal length of instrumentation after posterior decompression is unclear. Longer posterior cervical fixation constructs may increase the risk of adjacent-segment degeneration. METHODS: Eight cervicothoracic spines were evaluated intact, with C3-C6 laminectomy, C3-C6 laminectomy + C3-C6 fixation, C3-C6 laminectomy + C3-C7 fixation, C3-C7 laminectomy, C3-C7 laminectomy + C3-C7 fixation, C3-C7 laminectomy + C2-C7 fixation, C3-C7 laminectomy + C3-T2 fixation, and C3-C7 laminectomy + C2-T2 fixation. Testing included intact moments (± 2.0 N·m) in flexion/extension, axial rotation, and lateral bending, with quantification of ROM at C2-C3, C6-C7, and C7-T1 normalized to the intact spine. Intradiscal pressures were also measured at each level. RESULTS: For the C3-C6 laminectomy group, there were no differences in adjacent-level flexion/extension ROM or intradiscal pressure based on construct length, except at C6-C7, where ROM was significantly decreased when fixation was extended to C7 (P < 0.05). After C3-C7 laminectomy and reconstruction, the greatest increase in C2-C3 flexion/extension ROM and intradiscal pressure occurred in the C3-T2 fixation subgroup (ROM: 348% [P < 0.05]; intradiscal pressure: 319 ± 243 psi [pounds per square inch] vs. 65 ± 41 psi intact [P < 0.05]). At C7-T1, the greatest increase in flexion/extension ROM and intradiscal pressure occurred after C2-C7 fixation (ROM: 531% [P < 0.05]; intradiscal pressure: 152 ± 83 psi vs. 21 ± 14 psi intact [P < 0.05]). CONCLUSION: For C3-C6 laminectomy, instrumentation to C7 significantly decreased flexion/extension ROM and intradiscal pressure at C6-C7 without significantly increasing either measure at C2-C3 or C7-T1 relative to C3-C6 fixation. In the setting of a C3-C7 laminectomy, when instrumenting to either C2 or T2, consideration should be given to including both levels within these constructs.

A computed tomography-based feasibility study of translaminar screw placement in the pediatric thoracic spine.

OBJECT: Translaminar screws (TLSs) were originally described as a safer alternative to pedicle and transarticular screw placement at C-2 in adult patients. More recently, TLSs have been used in both the cervical and thoracic spine of pediatric patients as a primary fixation technique and as a bailout procedure when dysplastic pedicle morphology prohibits safe pedicle screw placement. Although authors have reported the anatomical characteristics of the cervical and thoracic lamina in adults as well as those of the cervical lamina in pediatric patients, no such data exist to guide safe TLS placement in the thoracic spine of the pediatric population. The goal of this study was to report the anatomical feasibility of TLS placement in the thoracic spine of pediatric patients. METHODS: Fifty-two patients (26 males and 26 females), with an average age of 9.5 ± 4.8 years, were selected by retrospective review of a trauma registry database after institutional review board approval. Study inclusion criteria were an age from 2 to 16 years, standardized axial bone-window CT images of the thoracic spine, and the absence of spinal trauma. For each thoracic lamina the following anatomical features were measured using eFilm Lite software: laminar width (outer cortical and cancellous), laminar height (LH), maximal screw length, and optimal screw trajectory. Patients were stratified by age (an age < 8 versus ≥ 8 years) and sex. RESULTS: Collected data demonstrate the following general trends as one descends the thoracic spine from T-1 to T-12: 1) increasing laminar width to T-4 followed by a steady decrease to T-12, 2) increasing LH, 3) decreasing maximal screw length, and 4) increasing ideal screw trajectory angle. When stratified by age and sex, male patients older than 8 years of age had significantly larger laminae in terms of both width and height and allowed significantly longer screw placement at all thoracic levels compared with their female counterparts. Importantly, it was found that 78% of individual thoracic laminae, regardless of age or sex, could accept a 4.0-mm screw with 1.0 mm of clearance. As expected, when stratifying by age and sex, it was found that older male patients had the highest acceptance rates. CONCLUSIONS: Data in the present study provide information regarding optimal TLS length, diameter, and trajectory for each thoracic spinal level in pediatric patients. Importantly, the data collected demonstrate no anatomical limitations within the pediatric thoracic spine to TLS instrumentation, although acceptance rates are lower for younger (< 8 years old) and/or female patients. Lastly, given the anatomical variation found in this study, CT scanning can be useful in the preoperative setting when planning TLS use in the thoracic spine of pediatric patients.

Primary intramedullary spinal germ cell tumors.

BACKGROUND: Intramedullary spinal germ cell tumors are rare lesions, with germinomas being the most common variant. METHODS: To date, there have been 23 reports of primary intramedullary germ cell tumors described in the literature, the vast majority occurring in Japanese patients. RESULTS: We present a case of a nonmetastatic intramedullary germ cell tumor in a 28-year-old Caucasian woman. CONCLUSIONS: Characteristics of intramedullary germ cell tumors are summarized, and the current role for surgery and adjuvant radiation and chemotherapy are discussed.

Strategies to avoid wrong-site surgery during spinal procedures.

Wrong-site surgery (WSS) is a rare occurrence that can have devastating consequences for patient care. There are several factors inherent to spine surgery that increase the risk of WSS compared with other types of surgery. Not only can a surgeon potentially operate on the wrong side of the spine or the wrong level, but there are unique issues related to spinal localization that can be challenging for even the most experienced clinicians. The following review discusses important issues that can help prevent WSS during spinal procedures.

Bilateral traumatic dislocation without fracture of the lumbosacral junction: case report and review of the literature.

STUDY DESIGN: Case report. OBJECTIVE: The diagnosis and surgical management of a patient with a traumatic bilateral dislocation of the lumbosacral junction (L5-S1) without facet or pars interarticularis fracture is presented with a thorough review of the existing literature. SUMMARY OF BACKGROUND DATA: Lumbar fracture-dislocations have been widely reported. However, only five cases of lumbosacral junction dislocation without a fracture have been previously reported. METHODS: A 23-year-old patient was involved in a high-energy occupational injury and presented with complaints of back pain and inability to ambulate. Neurological assessment confirmed adequate motor strength (4+/5 bilaterally), normal perianal and lower extremity sensation, and urinary retention (postvoid residual: 1000 mL). Imaging studies revealed bilateral L5-S1 facet dislocation (bilateral jumped facets) without articulating processes or pars interarticularis fractures. Three-column ligamentous injury was confirmed on magnetic resonance imaging with complete tear of the ligamentum flavum, anterior and posterior longitudinal ligaments, interspinous and supraspinous ligaments, and avulsion of the L5 spinous process. The patient underwent bilateral facetectomies, diskectomy, laminectomies, and reduction of slippage with interbody and posterolateral transpedicular instrumented fusion. RESULTS: At 1-year follow-up, the patient reported mild back pain well controlled with naproxen. He continued to report good improvement in his daily function. CONCLUSION: A careful clinical examination and imaging assessment must be done for appropriate diagnosis and treatment of this rare type of injury. Reduction in the face of intact articulating processes and pars interarticularis is challenging because of acting heavy forces on the lumbosacral joint. Facetectomies, nerve root decompression, and circumferential instrumented fusion are ways to decompress the neural elements, restore alignment, and maintain segmental stability.

A computed tomography-based morphometric study of thoracic pedicle anatomy in a random United States trauma population.

OBJECT: The objective of this study was to establish normative data for thoracic pedicle anatomy in the US adult population. To this end, CT scans chosen at random from an adult database were evaluated to determine the ideal pedicle screw (PS) length, diameter, trajectory, and starting point in the thoracic spine. The role of patient sex and side of screw placement were also assessed. The authors postulated that this information would be of value in guiding safe implant size and placement for surgeons in training. METHODS: One hundred patients (50 males and 50 females) were selected via retrospective review of a hospital trauma registry database over a 6-month period. Patients included in the study were older than 18 years of age, had axial bone-window CT images of the thoracic spine, and had no evidence of spinal trauma. For each pedicle, the pedicle width, pedicle-rib width, estimated screw length, trajectory, and ideal entry point were measured using eFilm Lite software. Statistical analysis was performed using the Student t-test. RESULTS: The shortest mean estimated PS length was at T-1 (33.9 ± 3.3 mm), and the longest was at T-9 (44.9 ± 4.4 mm). Pedicle screw length was significantly affected by patient sex; men could accommodate a PS from T1-12 a mean of 4.0 ± 1.0 mm longer than in women (p < 0.001). Pedicle width showed marked variation by spinal level, with T-4 (4.4 ± 1.1 mm) having the narrowest width and T-12 (8.3 ± 1.7 mm) having the widest. Pedicle width had an obvious affect on potential screw diameter; 65% of patients had a least 1 pedicle at T-4 that was < 5 mm in diameter and therefore would not accept a 4.0-mm screw with 1.0 mm of clearance, as compared with only 2% of patients with a similar status at T-12. Sex variation was also apparent, as thoracic pedicles from T-1 to T-12 were a mean of 1.4 ± 0.2 mm wider in men than in women (p < 0.001). The PS trajectory in the axial plane was measured, showing a marked decrease from T-1 to T-4, stabilization from T-5 to T-10, followed by a decrease at T11-12. When screw trajectory was stratified by side of placement, a mean of 1.7° ± 0.5° of increased medialization was required for ideal pedicle cannulation from T-3 to T-12 on the left as compared with the right side, presumably because of developmental changes in the vertebral body caused by the aorta (p < 0.05 for T3-12, except for T-5, where p = 0.051). The junction of the superior articular process, lamina, and the superior ridge of the transverse process was shown to be a conserved surface landmark for PS placement. CONCLUSIONS: Preoperative CT evaluation is important in choosing PS length, diameter, trajectory, and entry point due to variation based on spinal level, patient sex, and side of placement. These data are valuable for resident and fellow training to guide the safe use of thoracic PSs.