Biodegradation and sorption of nutrients and endocrine disruptors in a novel concrete-based substrate in vertical-flow constructed wetlands.

Removing phosphorus and endocrine-disruptors (EDC) is still challenging for low-cost sewage treatment systems. This study investigated the efficiency of three vertical-flow constructed wetlands (VFCW) vegetated with Eichhornia crassipes onto red clay (CW-RC), autoclaved aerated concrete (CW-AC), and composite from the chemical activation of autoclaved aerated concrete with white cement (CW-AAC) in the removal of organic matter, nutrients, and estrone, 17ß-estradiol, and 17α-ethinylestradiol. The novelty aspect of this study is related to selecting these clay and cementitious-based materials in removing endocrine disruptors and nutrients in VFCW. The subsurface VFCW were operated in sequencing-batch mode (cycles of 48-48-72 h), treating synthetic wastewater for 308 days. The operation consisted of Stages I and II, different by adding EDC in Stage II. The presence of EDC increased the competition for dissolved oxygen (DO) and reduced the active sites available for adsorption, diminishing the removal efficiencies of TKN and TAN and total phosphorus in the systems. CW-RC showed a significant increase in COD removal from 65% to 91%, while CW-AC and CW-AAC maintained stable COD removal (84%-82% and 78%-81%, respectively). Overall, the substrates proved effective in removing EDC, with CW-AC and CW-AAC achieving >60% of removal. Bacteria Candidatus Brocadia and Candidatus Jettenia, responsible for carrying out the Anammox process, were identified in assessing the microbial community structure. According to the mass balance analysis, adsorption is the main mechanism for removing TP in CW-AC and CW-AAC, while other losses were predominant in CW-RC. Conversely, for TN removal, the adsorption is more representative in CW-RC, and the different metabolic routes of microorganisms, biofilm assimilation, and partial ammonia volatilization in CW-AC and CW-AAC. The results suggest that the composite AAC is the most suitable material for enhancing the simultaneous removal of organic matter, nutrients, and EDC in VFCW under the evaluated operational conditions.

Recovery of methane dissolved in the effluent of a novel upflow anaerobic hybrid reactor (UAHB) submitted to temperature variation.

Recent studies point out losses of 30-40% of the produced methane in the effluent of anaerobic reactors treating sewage, reducing the renewable energy potential and the environmental footprint. A novel bench-scale upflow anaerobic hybrid (UAHB) reactor combining a sludge blanket at the bottom and a filter media at the top, both with three-phase separators, was proposed to evaluate the recovery of dissolved methane. UAHB was operated with volumetric organic loading rate of 1.24 kg COD m-3 d-1 and hydraulic retention time of 8 h for 218 days to evaluate the influence of temperature (18°C, 23°C, and 28°C) in the methane dissolved in the effluent and collected from three-phase separators. Chemical oxygen demand (COD) and total suspended solids (TSS) removals efficiencies remained constant during the operation and equal to 90 and 95%, respectively, related to the activity of biomass retained in the filter media. Temperature increase influenced more the methane production in the sludge blanket rather than in the upper bed. The volume of recovered methane increased about 20% with the installation of the support media and the upper three-phase separator (3PHS). The loss of methane dissolved in the effluent was strongly influenced by the temperature, and higher with the decrease of this parameter. Non-statistically significant correlations were observed between the temperature and the methane production in the upper bed (p-value = 0.0943) and total (p-value = 0.0930). Thus, it can be concluded that the evaluated temperatures did not influence the global efficiency and the total methane yield of the UAHB reactor.

Influence of HRT and carbon source on the enhancement of nutrient removal in an Anaerobic-Oxic-Anoxic (AOA) system.

The eutrophication and increase in toxicity promoted by the continuous or abundant supply of nutrients in water bodies threaten the safety of drinking water and human health. In this regard, this study proposes the investigation of wastewater treatment focusing on the simultaneous removal of nitrogen and phosphorus in the anaerobic-oxic-anoxic (AOA) system. The AOA system was operated in three different stages to verify the influence of the external carbon source addition in the anoxic reactor and the reduction of hydraulic retention time (HRT) in the anaerobic and oxic reactors for nutrient removal optimization. Results showed that the best performance of the AOA system on nutrient removal was obtained in Stage 3, with the reduction of the HRT in the anaerobic and oxic reactors (HRT = 4 h) while maintaining HRT of 6.4 h in the anoxic reactor with no addition of the external carbon source. Under these conditions, the average removal efficiencies reached 98% for Chemical Oxygen Demand (COD), 88% for Total Ammonia Nitrogen (TAN), 81% for Total Kjeldahl Nitrogen (TKN), and 70% for Total Phosphorus (TP). The results also demonstrate that the highest phosphorus removal efficiency was achieved in the anoxic reactor, thus indicating the occurrence of denitrifying phosphorous removal by Denitrifying Phosphate Accumulating Organisms (DNPAOs). This configuration was efficient regarding the simultaneous removal of nitrogen and phosphorus; besides, the advantages of this system include robust configuration and excellent performance on the nutrient removal.

Avaliação do comportamento hidrodinâmico de reator anaeróbio de manta de lodo e fluxo ascendente com diferentes configurações do sistema de distribuição do afluente utilizando fluidodinâmica computacional / Hydrodynamic performance evaluation of an upflow anaerobic sludge blanket reactor with different configurations of the influent distribution system using computational fluid dynamics

RESUMO Compreender o comportamento hidrodinâmico de reatores biológicos pode auxiliar na detecção de problemas associados a falhas operacionais e de projeto, situações que prejudicam a eficiência do tratamento. Neste artigo, realizaram-se simulações da fluidodinâmica computacional (CFD) de escoamento de duas fases sólida-líquida de um reator anaeróbio de manta de lodo e fluxo ascendente (UASB), em escala piloto (160 L), com tempo de detenção hidráulica (TDH) de 10 h e vazão de 16 L.h-1. Um modelo Euler-Euler simplificado foi formulado para simular o comportamento hidrodinâmico da zona de reação, influenciada pela configuração do sistema de distribuição do afluente. Foram avaliadas quatro configurações do sistema de distribuição do afluente no reator: uma entrada na parte central (1) e duas entradas centrais (2), de fluxo ascendente; duas entradas nas laterais (3), de fluxo radial; e três entradas de fluxo descendente (4), utilizando geometrias bidimensionais e tridimensionais para verificar a formação de zonas mortas, curtos-circuitos hidráulicos e caminhos preferenciais. As melhores características hidrodinâmicas e a melhor distribuição do afluente foram verificadas na configuração 4, com melhor perfil de mistura do lodo com a fase líquida, na comparação com as demais configurações. Foi notada formação de vórtices na parte inferior do reator com maior concentração do lodo anaeróbio nessa configuração e de caminhos preferenciais nas laterais do reator na configuração 3, indicando mistura ineficiente do afluente com o lodo anaeróbio. O modelo demonstrou que a configuração do sistema de distribuição do afluente influencia significativamente o comportamento hidrodinâmico do reator UASB.

ABSTRACT Understanding the hydrodynamics behavior of biological reactors can help in the detection of problems related to operational failures and design that adversely affect the efficiency of the treatment. In this paper, computational fluid dynamics (CFD) simulations of two-phase liquid-solid flow were carried out in an upflow anaerobic sludge blanket reactor in pilot scale (160 L), with hydraulic retention time (HRT) of 10 h and flowrate 16 L.h-1. The Euler-Euler approach was formulated to simulate the reaction zone hydrodynamics. Four configurations of the influent distribution system in the reactor were evaluated: one central inlet (1) and two central inlets (2), upflow; two lateral inlets (3), radial flow; and three inlets, downflow (4), using two and three-dimensional geometries to verify the formation of dead zones, hydraulic short-circuiting and preferential pathways. Better influent distribution and greater mixture profile of the sludge with the liquid phase were found in the configuration 4, compared to the others by the formation of vortices in the bottom part of the reactor with higher concentration of anaerobic sludge. Formation of preferential pathways was noted in the lateral inlets of the reactor in the configuration 3, indicating an inefficient mixture of the influent with the sludge. The model demonstrates that the configuration of the influent distribution system significantly influences the hydrodynamics behavior of the UASB reactor.