Efficient detection of 45 ppb ammonia at room temperature using Ni-doped CeO2 octahedral nanostructures.

To meet the requirements in air quality monitors for the public and industrial safety, sensors are required that can selectively detect the concentration of gaseous pollutants down to the parts per million (ppm) and ppb (parts per billion) levels. Herein, we report a remarkable NH3 sensor using Ni-doped CeO2 octahedral nanostructure which efficiently detects NH3 as low as 45 ppb at room temperature. The Ni-doped CeO2 sensor exhibits the maximum response of 42 towards 225 ppm NH3, which is ten-fold higher than pure CeO2. The improved sensing performance is caused by the enhancement of oxygen vacancy, bandgap narrowing, and redox property of CeO2 caused by Ni doping. Density functional theory confirms that O vacancy with Ni at Ce site (VONiCe) augments the sensing capabilities. The Bader charge analysis predicts the amount of charge transfer (0.04 e) between the Ni-CeO2 surface and the NH3 molecule. As well, the high negative adsorption energy (≈750 meV) and lowest distance (1.40 Å) of the NH3 molecule from the sensor surface lowers the detection limit. The present work enlightens the fabrication of sensing elements through defect engineering for ultra-trace detection of NH3 to be useful further in the field of sensor applications.

Effectual visible light photocatalytic reduction of para-nitro phenol using reduced graphene oxide and ZnO composite.

Removing wastewater pollutants using semiconducting-based heterogeneous photocatalysis is an advantageous technique because it provides strong redox power charge carriers under sunlight irradiation. In this study, we synthesized a composite of reduced graphene oxide (rGO) and zinc oxide nanorods (ZnO) called rGO@ZnO. We established the formation of type II heterojunction composites by employing various physicochemical characterization techniques. To evaluate the photocatalytic performance of the synthesized rGO@ZnO composite, we tested it for reducing a common wastewater pollutant, para-nitro phenol (PNP), to para-amino phenol (PAP) under both ultraviolet (UV) and visible light irradiances. The rGOx@ZnO (x = 0.5-7 wt%) samples, comprising various weights of rGO, were investigated as potential photocatalysts for the reduction of PNP to PAP under visible light irradiation. Among the samples, rGO5@ZnO exhibited remarkable photocatalytic activity, achieving a PNP reduction efficiency of approximately 98% within a short duration of four minutes. These results demonstrate an effective strategy and provide fundamental insights into removing high-value-added organic water pollutants.

Biofunctionalized CdS Quantum Dots: A Case Study on Nanomaterial Toxicity in the Photocatalytic Wastewater Treatment Process.

The toxic nature of inorganic nanostructured materials as photocatalysts is often not accounted for in traditional wastewater treatment reactions. Particularly, some inorganic nanomaterials employed as photocatalysts may release secondary pollutants in the form of ionic species that leach out due to photocorrosion. In this context, this work is a proof-of-concept study for exploring the environmental toxicity effect of extremely small-sized nanoparticles (<10 nm) like quantum dots (QDs) that are employed as photocatalysts, and in this study, cadmium sulfide (CdS) QDs are chosen. Typically, CdS is an excellent semiconductor with suitable bandgap and band-edge positions that is attractive for applications in solar cells, photocatalysis, and bioimaging. However, the leaching of toxic cadmium (Cd2+) metal ions due to the poor photocorrosion stability of CdS is a matter of serious concern. Therefore, in this report, a cost-effective strategy is devised for biofunctionalizing the active surface of CdS QDs by employing tea leaf extract, which is expected to hinder photocorrosion and prevent the leaching of toxic Cd2+ ions. The coating of tea leaf moieties (chlorophyll and polyphenol) over the CdS QDs (referred to hereafter as G-CdS QDs) was confirmed through structural, morphological, and chemical analysis. Moreover, the enhanced visible-light absorption and emission intensity of G-CdS QDs in comparison to that of C-CdS QDs synthesized through a conventional chemical synthesis approach confirmed the presence of chlorophyll/polyphenol coating. Interestingly, the polyphenol/chlorophyll molecules formed a heterojunction with CdS QDs and enabled the G-CdS QDs to exhibit enhanced photocatalytic activity in the degradation of methylene blue dye molecules over C-CdS QDs while effectively preventing photocorrosion as confirmed from cyclic photodegradation studies. Furthermore, detailed toxicity studies were conducted by exposing zebrafish embryos to the as-synthesized CdS QDs for 72 h. Surprisingly, the survival rate of the zebrafish embryos exposed to G-CdS QDs was equal to that of the control, indicating a significant reduction in the leaching of Cd2+ ions from G-CdS QDs in comparison to C-CdS QDs. The chemical environment of C-CdS and G-CdS before and after the photocatalysis reaction was examined by X-ray photoelectron spectroscopy. These experimental findings prove that biocompatibility and toxicity could be controlled by simply adding tea leaf extract during the synthesis of nanostructured materials, and revisiting green synthesis techniques can be beneficial. Furthermore, repurposing the discarded tea leaves may not only facilitate the control of toxicity of inorganic nanostructured materials but can also help in enhancing global environmental sustainability.

A Novel and Sustainable Approach to Enhance the Li-Ion Storage Capability of Recycled Graphite Anode from Spent Lithium-Ion Batteries.

The ubiquitous manufacturing of lithium-ion batteries (LIBs) due to high consumer demand produces inevitable e-waste that imposes severe environmental and resource sustainability challenges. In this work, the charge storage capability and Li-ion kinetics of the recovered water-leached graphite (WG) anode from spent LIBs are enhanced by using an optimized amount of recycled graphene nanoflakes (GNFs) as an additive. The WG@GNF anode exhibits an initial discharge capacity of 400 mAh g-1 at 0.5C with 88.5% capacity retention over 300 cycles. Besides, it delivers an average discharge capacity of 320 mAh g-1 at 500 mA g-1 over 1000 cycles, which is 1.5-2 times higher than that of WG. The sharp increase in electrochemical performance is due to the synergistic effects of Li-ion intercalation into the graphite layers and Li-ion adsorption into the surface functionalities of GNF. Density functional theory calculations reveal the role of functionalization behind the superior voltage profile of WG@GNF. Besides, the unique morphology of spherical graphite particles trapping into graphene nanoflakes provides mechanical stability over long-term cycling. This work explains an efficient strategy to upgrade the electrochemical compatibility of recovered graphite anode from spent LIBs toward next-generation high-energy-density LIBs.

Article Application of neural network in metal adsorption using biomaterials (BMs): a review.

With growing environmental consciousness, biomaterials (BMs) have garnered attention as sustainable materials for the adsorption of hazardous water contaminants. These BMs are engineered using surface treatments or physical alterations to enhance their adsorptive properties. The lab-scale methods generally employ a One Variable at a Time (OVAT) approach to analyze the impact of biomaterial modifications, their characteristics and other process variables such as pH, temperature, dosage, etc., on the removal of metals via adsorption. Although implementing the adsorption procedure using BMs seems simple, the conjugate effects of adsorbent properties and process attributes implicate complex nonlinear interactions. As a result, artificial neural networks (ANN) have gained traction in the quest to understand the complex metal adsorption processes on biomaterials, with applications in environmental remediation and water reuse. This review discusses recent progress using ANN frameworks for metal adsorption using modified biomaterials. Subsequently, the paper comprehensively evaluates the development of a hybrid-ANN system to estimate isothermal, kinetic and thermodynamic parameters in multicomponent adsorption systems.

Facile Synthesis of Gram-Scale Mesoporous Ag/TiO2 Photocatalysts for Pharmaceutical Water Pollutant Removal and Green Hydrogen Generation.

This work demonstrates a two-step gram-scale synthesis of presynthesized silver (Ag) nanoparticles impregnated with mesoporous TiO2 and evaluates their feasibility for wastewater treatment and hydrogen gas generation under natural sunlight. Paracetamol was chosen as the model pharmaceutical pollutant for evaluating photocatalytic performance. A systematic material analysis (morphology, chemical environment, optical bandgap energy) of the Ag/TiO2 photocatalyst powder was carried out, and the influence of material properties on the performance is discussed in detail. The experimental results showed that the decoration of anatase TiO2 nanoparticles (size between 80 and 100 nm) with 5 nm Ag nanoparticles (1 wt %) induced visible-light absorption and enhanced charge carrier separation. As a result, 0.01 g/L Ag/TiO2 effectively removed 99% of 0.01 g/L paracetamol in 120 min and exhibited 60% higher photocatalytic removal than pristine TiO2. Alongside paracetamol degradation, Ag/TiO2 led to the generation of 1729 µmol H2 g-1 h-1. This proof-of-concept approach for tandem pollutant degradation and hydrogen generation was further evaluated with rare earth metal (lanthanum)- and nonmetal (nitrogen)-doped TiO2, which also showed a positive response. Using a combination of ab initio calculations and our new theory model, we revealed that the enhanced photocatalytic performance of Ag/TiO2 was due to the surface Fermi-level change of TiO2 and lowered surface reaction energy barrier for water pollutant oxidation. This work opens new opportunities for exploiting tandem photocatalytic routes beyond water splitting and understanding the simultaneous reactions in metal-doped metal oxide photocatalyst systems under natural sunlight.

Ultra-Sensitive Impedimetric Immunosensor Using Copper Oxide Quantum Dots Grafted on the Gold Microelectrode for the Detection of Parathion.

The extensive use of organophosphates (OPs) pollutes the environment, leading to serious health hazards for human beings. The current need is to fabricate a sensing platform that will be sensitive and selective towards the detection of OPs at trace levels in the nM to fM range. With this discussed in the present report, an ultra-sensitive immunosensing platform is developed using digestive-ripened copper oxide quantum dots grafted on a gold microelectrode (Au-µE) for the impedimetric detection of parathion (PT). The copper oxide quantum dots utilized in this study were of ultra-small size with a radius of approximately 2 to 3 nm and were monodispersed with readily available functional groups for the potential immobilization of antibody parathion (Anti-PT). The miniaturization is achieved by the utilization of Au-µE and the microfluidic platform utilized has the sample holding capacity of about 2 to 10 µL. The developed immunosensor provided a wide linear range of detection from 1 µM to 1 fM. The lower Limit of Detection (LoD) for the developed sensing platform was calculated to be 0.69 fM, with the sensitivity calculated to be 0.14 kΩ/nM/mm2. The stability of the sensor was found to be ~40 days with good selectivity. The developed sensor has the potential to integrate with a portable device for field applications.

Surface Functionalized MXenes for Wastewater Treatment-A Comprehensive Review.

Over 80% of wastewater worldwide is released into the environment without proper treatment. Whilst environmental pollution continues to intensify due to the increase in the number of polluting industries, conventional techniques employed to clean the environment are poorly effective and are expensive. MXenes are a new class of 2D materials that have received a lot of attention for an extensive range of applications due to their tuneable interlayer spacing and tailorable surface chemistry. Several MXene-based nanomaterials with remarkable properties have been proposed, synthesized, and used in environmental remediation applications. In this work, a comprehensive review of the state-of-the-art research progress on the promising potential of surface functionalized MXenes as photocatalysts, adsorbents, and membranes for wastewater treatment is presented. The sources, composition, and effects of wastewater on human health and the environment are displayed. Furthermore, the synthesis, surface functionalization, and characterization techniques of merit used in the study of MXenes are discussed, detailing the effects of a range of factors (e.g., PH, temperature, precursor, etc.) on the synthesis, surface functionalization, and performance of the resulting MXenes. Finally, the limits of MXenes and MXene-based materials as well as their potential future research directions, especially for wastewater treatment applications are highlighted.

Selected 'Starter kit' energy system modelling data for selected countries in Africa, East Asia, and South America (#CCG, 2021).

Energy system modeling can be used to develop internally-consistent quantified scenarios. These provide key insights needed to mobilise finance, understand market development, infrastructure deployment and the associated role of institutions, and generally support improved policymaking. However, access to data is often a barrier to starting energy system modeling, especially in developing countries, thereby causing delays to decision making. Therefore, this article provides data that can be used to create a simple zero-order energy system model for a range of developing countries in Africa, East Asia, and South America, which can act as a starting point for further model development and scenario analysis. The data are collected entirely from publicly available and accessible sources, including the websites and databases of international organisations, journal articles, and existing modeling studies. This means that the datasets can be easily updated based on the latest available information or more detailed and accurate local data. As an example, these data were also used to calibrate a simple energy system model for Kenya using the Open Source Energy Modeling System (OSeMOSYS) and three stylized scenarios (Fossil Future, Least Cost and Net Zero by 2050) for 2020-2050. The assumptions used and the results of these scenarios are presented in the appendix as an illustrative example of what can be done with these data. This simple model can be adapted and further developed by in-country analysts and academics, providing a platform for future work.

Demonstration of a plant-microbe integrated system for treatment of real-time textile industry wastewater.

The real-time textile dyes wastewater contains hazardous and recalcitrant chemicals that are difficult to degrade by conventional methods. Such pollutants, when released without proper treatment into the environment, impact water quality and usage. Hence, the textile dye effluent is considered a severe environmental pollutant. It contains mixed contaminants like dyes, sodium bicarbonate, acetic acid. The physico-chemical treatment of these wastewaters produces a large amount of sludge and costly. Acceptance of technology by the industry mandates that it should be efficient, cost-effective and the treated water is safe for reuse. A sequential anaerobic-aerobic plant-microbe system with acclimatized microorganisms and vetiver plants, was evaluated at a pilot-scale on-site. At the end of the sequential process, decolorization and total aromatic amine (TAA) removal were 78.8% and 69.2% respectively. Analysis of the treated water at various stages using Fourier Transform Infrared (FTIR), High Performance Liquid Chromatography (HPLC)) Gas Chromatography-Mass Spectrometry (GC-MS) Liquid Chromatography-Mass Spectrometry (LC-MS) indicated that the dyes were decolourized and the aromatic amine intermediates formed were degraded to give aliphatic compounds. Scanning Electron Microscope (SEM) and Atomic Force Microscopy (AFM) analysis showed interaction of microbe with the roots of vetiver plants. Toxicity analysis with zebrafish indicated the removal of toxins and teratogens.

Removal and degradation of mixed dye pollutants by integrated adsorption-photocatalysis technique using 2-D MoS2/TiO2 nanocomposite.

Two-dimensional (2D) Molybdenum disulfide (MoS2) has become one of the most exciting areas of research for adsorbents due to its high surface area and abundant active sites. Mainly, 2D MoS2 show promising removal of textile dye pollutants by adsorption process, but it show high affinity for anionic type of dyes, that limits its performance in mixed dye pollutants treatment. Herein, we demonstrate an integrated approach to remove mixed dye pollutants (anionic and cationic) concurrently by combining adsorption and photocatalysis process. We synthesize MoS2/TiO2 nanocomposites for different weight percentages 2.5, 5, 10, 20, 30 and 50 wt% of pre-synthesized flower-like MoS2 nanoparticle by a two-step hydrothermal method. We demonstrate a new process of two-stage adsorption/photocatalysis using high wt% of MoS2 (Stage-I) and low wt% of MoS2 (Stage-II) nanocomposites. The proposed two-stage integrated adsorption and photocatalysis process using 50% and 2.5% of MoS2 coated TiO2, respectively showed complete removal of methylene blue dye ∼5 times faster than conventional single-stage (adsorption or photocatalysis) water treatment process. Furthermore, the feasibility of the proposed two-stage method in mixed dye pollutants removal (anionic and cationic) testified, which showed excellent performance even in doubling the dye pollutant concentration. This work brings a deeper insight into understanding the morphology and concentration of 2-D MoS2 in MoS2/TiO2 nanocomposite in tackling mixed dye pollutants and the possibilities of applying in textile dyeing industries wastewater treatment plants.

Microfluidic Affinity Sensor Based on a Molecularly Imprinted Polymer for Ultrasensitive Detection of Chlorpyrifos.

The persistent use of pesticides in the agriculture field remains a serious issue related to public health. In the present work, molecularly imprinted polymer thin films were developed using electropolymerization of pyrrole (py) onto gold microelectrodes followed by electrodeposition for the selective detection of chlorpyrifos (CPF). The molecularly imprinted polymer (MIP) was synthesized by the electrochemical deposition method, which allowed in-line transfer of MIP on gold microelectrodes without using any additional adhering agents. Various parameters such as pH, monomer ratio, scan rate, and deposition cycle were optimized for sensor fabrication. The sensor was characterized at every stage of fabrication using various spectroscopic, microscopic, and electrochemical techniques. The sensor requires only 2 µL of the analyte and its linear detection range was found to be 1 µM to 1 fM. The developed sensor's limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.93 and 2.82 fM, respectively, with a sensitivity of 3.98 (µA/(µM)/ mm2. The sensor's shelf life was tested for 70 days. The applicability of the sensor in detecting CPF in fruit and vegetable samples was also assessed out with recovery % between 91 and 97% (RSD < 5%). The developed sensor possesses a huge commercial potential for on-field monitoring of pesticides.

Microwave- and Formaldehyde-Assisted Synthesis of Ag-Ag3PO4 with Enhanced Photocatalytic Activity for the Degradation of Rhodamine B Dye and Crude Oil Fractions.

The release of crude oil and water-soluble dyes into our marine environment is a major global problem. An efficient semiconductor Ag-Ag3PO4 photocatalyst was synthesized using formaldehyde as a reducing agent to form surface active Ag on Ag3PO4 under microwave radiation for heating, and its potential in destroying environmental pollutants has been examined. The diffuse reflectance spectroscopy of Ag-Ag3PO4 revealed an enhanced absorption in the visible light region. The rate of photocatalytic degradation of rhodamine B by Ag-Ag3PO4 was over 4-fold compared to Ag3PO4. The potential application of Ag-Ag3PO4 in oil spill remediation was also examined through photocatalytic degradation of benzene, n-hexane, and 1:1 v/v benzene/methanol crude oil-soluble fractions. UV-vis and gas chromatography-mass spectrometry analysis of the crude oil components after visible light irradiation showed excellent degradation. The photocatalytic efficiency enhancement of Ag-Ag3PO4 is attributed to the excellent electron trapping of silver nanoparticles deposited on the surface of Ag3PO4. This work will motivate future studies to develop recyclable visible light photocatalysts for many applications.

Electro-deposited nano-webbed structures based on polyaniline/multi walled carbon nanotubes for enzymatic detection of organophosphates.

We report the development of an ultrasensitive electrochemical sensor using polyaniline (PANi) and carboxyl functionalized multi-walled carbon nanotubes (fMWCNT) for the detection of organophosphates (OPs) in real samples. The sensor was tested in the linear concentration range of 10 ng/L to 120 ng/L. The limit of detection (LoD) was found to be 8.8 ng/L with sensitivity 0.41 mA/ng/L/cm2 for chlorpyrifos (CPF); and 10.2 ng/L with sensitivity 0.58 mA/ng/L/cm2 for methyl parathion (MP). The vegetable samples (cucumber) were also tested. The average % recovery for CPF and MP were found to be 98.05% and 96.63% respectively. The developed sensor showed stability for a period of 30 days. The interference of the sensor was studied with heavy metals (cadmium (Cd), chromium (Cr), lead (Pb), arsenic (As)) which was found to be < 10%. The developed sensor will play a major role in real-time monitoring of food products, leading to food safety.

Engineering work function of graphene oxide from p to n type using a low power atmospheric pressure plasma jet.

In this work, we demonstrate doping graphene oxide (GO) films using a low power atmospheric pressure plasma jet (APPJ) with subsequent tuning of the work function. The surface potential of the plasma functionalized GO films could be tuned by 120 ± 10 mV by varying plasma parameters. X-ray spectroscopy used to probe these changes in electronic structure of systematically functionalized GO films by plasma. Detailed investigation using X-ray photoelectron spectroscopy and near edge X-ray absorption fine structure spectroscopy revealed the reactive nitrogen species in the plasma induce finite changes in the surface chemistry of the GO films, introducing additional density of states near the top of the valence band edge. Nitrogen introduced by the atmospheric pressure plasma is predominantly in a graphitic configuration with a varying concentration of pyridinic nitrogen. Additionally, evidence of gradual de-epoxidation of these GO films with increasing plasma exposure was also observed. We attribute this variation in work function values to the configuration of nitrogen in the graphitic structure as revealed by X-ray spectroscopy. With pyridinic nitrogen the electronic states of GO became electron deficient, inducing a p-type doping whereas an increase in graphitic nitrogen increased the electron density of GO leading to an n-type doping effect. Nitrogen doping was also found to decrease the resistivity from 138 MΩ sq-1 to 4 MΩ sq-1. These findings are extremely useful in fabricating heterojunction devices like sensors and optoelectronic devices where band structure alignment is key to device performance when GO is used as a charge transport layer. This technique can be extended to other known 2D systems.

Electrochemical micro analytical device interfaced with portable potentiostat for rapid detection of chlorpyrifos using acetylcholinesterase conjugated metal organic framework using Internet of things.

An Electrochemical micro Analytical Device (EµAD) was fabricated for sensitive detection of organophosphate pesticide chlorpyrifos in the food chain. Gold microelectrode (µE) modified with Zinc based Metal Organic Framework (MOF-Basolite Z1200) and Acetylcholinesterase (AChE) enzyme served as an excellent electro-analytical transducer for the detection of chlorpyrifos. Electrochemical techniques such as Cyclic Voltammetry (CV), Electrochemical Impedance Spectroscopy (EIS) and Differential Pulse Voltammetry (DPV) were performed for electrochemical analysis of the developed EµAD. The sensor needs only 2 µL of the analyte and it was tested within the linear range of 10 to 100 ng/L. The developed EµAD's limit of detection (LoD) and sensitivity is 6 ng/L and 0.598 µ A/ng L-1/mm2 respectively. The applicability of the device for the detection of chlorpyrifos from the real vegetable sample was also tested within the range specified. The fabricated sensor showed good stability with a shelf-life of 20 days. The EµAD's response time is of 50 s, including an incubation time of 20 s. The developed EµAD was also integrated with commercially available low-cost, handheld potentiostat (k-Stat) using Bluetooth and the results were comparable with a standard electrochemical workstation.

Plasma Jet Printing and in Situ Reduction of Highly Acidic Graphene Oxide.

Miniaturization of electronic devices and the advancement of Internet of Things pose exciting challenges to develop technologies for patterned deposition of functional nanomaterials. Printed and flexible electronic devices and energy storage devices can be embedded onto clothing or other flexible surfaces. Graphene oxide (GO) has gained much attention in printed electronics due its solution processability, robustness, and high electrical conductivity in the reduced state. Here, we introduce an approach to print GO films from highly acidic suspensions with in situ reduction using an atmospheric pressure plasma jet. Low-temperature plasma of a He and H2 mixture was used successfully to reduce a highly acidic GO suspension (pH < 2) in situ during deposition. This technique overcomes the multiple intermediate steps required to increase the conductivity of deposited GO. X-ray spectroscopic studies confirmed that the reaction intermediates and the concentration of oxygen functionalities bonded to GO have been reduced significantly by this approach without any additional steps. Moreover, the reduced GO films showed enhanced conductivity. Hence, this technique has a strong potential for printing conducting patterns of GO for a range of large-scale applications.

Robust water repellent ZnO nanorod array by Swift Heavy Ion Irradiation: Effect of Electronic Excitation Induced Local Chemical State Modification.

Tailoring the surface properties by varying the chemistry and roughness could be of interest for self-cleaning applications. We demonstrate the transformation of hydrophobic ZnO Nano rod (NR) array into superhydrophobic nature by changing the local chemical state and without altering the surface roughness by swift heavy ion (SHI) irradiation. The aligned ZnO NR arrays were irradiated using 150 MeV Ag ions with different fluences from 5E10 to 3E12 ions/cm2. The observed static water contact angles of ZnO NRs samples were 103° ± 3°, 152° ± 4°,161° ± 3°, 164° ± 2°, 167° ± 2°,154 ± 3° and 151° ± 2° for the pristine, ion fluencies of 1E11, 3E11, 5E11, 7E11, 1E12 and 3E12 ions cm-2, respectively. The change in local surface chemistry via formation of surface oxygen related defects due to electronic excitations induced by ion irradiation determine the water dewetting properties. It is found that surface oxygen related defects could be tuned by varying the fluence of the SHIs. Durability tests show that the SHI induced surface oxygen-deficient ZnO NRs have the stable superhydrophobic behavior for more than a year.

Mediator-free interaction of glucose oxidase, as model enzyme for immobilization, with Al-doped and undoped ZnO thin films laser-deposited on polycarbonate supports.

Al doped and undoped ZnO thin films were deposited by pulsed-laser deposition on polycarbonate sheets. The films were characterized by optical transmission, Hall effect measurement, XRD and SEM. Optical transmission and surface reflectometry studies showed good transparency with thicknesses ∼100nm and surface roughness of 10nm. Hall effect measurements showed that the sheet carrier concentration was -1.44×1015cm-2 for AZO and -6×1014cm-2 for ZnO. The films were then modified by drop-casting glucose oxidase (GOx) without the use of any mediators. Higher protein concentration was observed on ZnO as compared to AZO with higher specific activity for ZnO (0.042Umg-1) compared to AZO (0.032Umg-1), and was in agreement with cyclic voltemmetry (CV). X-ray photoelectron spectroscopy (XPS) suggested that the protein was bound by dipole interactions between AZO lattice oxygen and the amino group of the enzyme. Chronoamperometry showed sensitivity of 5.5µAmM-1cm-2 towards glucose for GOx/AZO and 2.2µAmM-1cm-2 for GOx/ZnO. The limit of detection (LoD) was 167µM of glucose for GOx/AZO, as compared to 360µM for GOx/ZnO. The linearity was 0.28-28mM for GOx/AZO whereas it was 0.6-28mM for GOx/ZnO with a response time of 10s. Possibly due to higher enzyme loading, the decrease of impedance in presence of glucose was larger for GOx/ZnO as compared to GOx/AZO in electrochemical impedance spectroscopy (EIS). Analyses with clinical blood serum samples showed that the systems had good reproducibility and accuracy. The characteristics of novel ZnO and AZO thin films with GOx as a model enzyme, should prove useful for the future fabrication of inexpensive, highly sensitive, disposable electrochemical biosensors for high throughput diagnostics.

Synthesis of Diagnostic Silicon Nanoparticles for Targeted Delivery of Thiourea to Epidermal Growth Factor Receptor-Expressing Cancer Cells.

The novel thiourea-functionalized silicon nanoparticles (SiNPs) have been successfully synthesized using allylamine and sulforaphane, an important anticancer drug, followed by a hydrosilylation reaction on the surface of hydrogen terminated SiNPs. Their physiochemical properties have been investigated by photoluminescence emission, Fourier transform infrared spectroscopy (FTIR) and elemental analysis. The MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay has been employed to evaluate in vitro toxicity in human colorectal adenocarcinoma (Caco-2) cells and human normal colon epithelial (CCD) cells. The results show significant toxicity of thiourea SiNPs after 72 h of incubation in the cancer cell line, and the toxicity is concentration dependent and saturated for concentrations above 100 µg/mL. Confocal microscopy images have demonstrated the internalization of thiourea-functionalized SiNPs inside the cells. Flow cytometry data has confirmed receptor-mediated targeting in cancer cells. This nanocomposite takes advantage of the epidermal growth factor receptor (EGFR) active targeting of the ligand in addition to the photoluminescence properties of SiNPs for bioimaging purposes. The results suggest that this novel nanosystem can be extrapolated for active targeting of the receptors that are overexpressed in cancer cells such as EGFR using the targeting characteristics of thiourea-functionalized SiNPs and therefore encourage further investigation and development of anticancer agents specifically exploiting the EGFR inhibitory activity of such nanoparticles.