ABSTRACT
Photovoltaic (PV)-based power generation systems are becoming increasingly popular as a due to its high performance and cleanliness. Several factors influence the performance of a PV system, including shadowing effects. PV systems employ MPPT methodologies to obtain the power from PV array. Conventional MPPTs works well under normal conditions when there is no shadow effects or partial shading. The presence of partial shading affects the system performance and generates several power peaks. This complicates the process of finding out of the global peak (GMPP) with improved tracking efficiency and reduced settling time including conversion efficiency. This work proposes three hybrid MPPT techniques: Water Cycle Optimisation-Perturb and Observe (WCO-PO), Artificial Neural Network Supported Adaptable Stepped-Scaled Perturb and Observe (ANN-ASSPO), Grey Wolf Optimisation-Modified Fast Terminal Sliding Mode Controller (GWO-MFTSMC), and two conventional MPPT techniques WCO and P&O have been implemented. The proposed system utilizes interleaved boost converter with three phase. The performances of proposed hybrid MPPTs strategies were compared in terms of output voltage, output current and extracted power. The comparison also includes conversion efficiency and average settling time. To analyse the performances, four different cases have been used to test the efficacy of hybrid MPPTs under changing climatic conditions. The MATLAB/Simulink tool has been used to analyze the PV system performances. In the three hybrid MPPT techniques, WCO-PO has performed better when compared to other two hybrid MPPTs in terms of conversion efficiency (99.56%) and settling time (1.4 m).
ABSTRACT
Solar energy is the most promising among many renewable energy sources to meet the increasing demand. Photovoltaic (PV) based power generating solutions are expected to gain popularity as a power source for different applications, including independent and grid connected loads, due to their cleanliness, high performance, and high dependability. The efficacy of photovoltaic systems is impacted by several elements, including geographical location, positioning, shadowing effects, and local climate conditions. In order to fulfil the demands of loads, an interleaved boost converter is utilized, which has a reduced number of filters with less stress on the devices. Solar powered systems employ several maximum power point tracking (MPPT) methodologies. However, when there is partial shading, many power peaks arise, which complicates the identification of the overall peak. Although MPPT approaches are designed to measure and maintain the global maximum power point (GMPP), there are still significant oscillations observed around the GMPP with subpar settling time, tracking efficiency, and conversion efficiency. In this work, novel hybrid MPPT technique called artificial neural network supported adaptable stepped-scaled perturb and observe (ANN-ASSPO) method and water cycle optimization based perturb and observe (WCO-PO) have been proposed. Artificial neural network (ANN) has been used to determine the best scaling factor in ANN-ASSPO MPPT. Performance is enhanced in ANN-ASSPO MPPT by using the optimum scaling factor, particularly in situations when the irradiance is rapidly changing/partial shading conditions. Similarly, in WCO-PO MPPT water cycle optimization is used to determine the peak power when the PV panel is subjected to partial shading conditions. The performances of proposed hybrid MPPT ANN-ASSPO and WCO-PO techniques have been compared in terms of power generated, output voltage, average settling time and conversion efficiency. The MATLAB/Simulink tool is employed to carry out the experiment for this study.
ABSTRACT
The conventional MPPT method has drawbacks, such as that under partial shading conditions, several peaks occur and identifying the global peak is difficult. It may converge to a local peak and lead to poor conversion efficiency and tracking efficiency. Implementation of a hybrid algorithm by integrating P&O and metaheuristic algorithms can perform better under partial shading conditions. But the tracking speed is low and the response time is longer. To mitigate the issues mentioned above, a new hybrid algorithm has been suggested that integrates GWO and a modified fast terminal sliding mode controller (MFTSMC). The suggested method with three phase ILBC is incorporated into the PV system. The MATLAB tool is employed to experiment with this study. The performance of GWO-MFTSMC is analysed through MATLAB/ SIMULINK and compared with the performance of ANN-FTSMC and PSO-FTSMC algorithm based MPPT techniques. A hardware prototype is developed and tested for 5 × 200 W solar PV modules with the GWO-MFTSMC algorithm. The proposed method conversion efficiency is 99.72% and 96.15% under simulation and hardware realisation, respectively, which is higher than the ANN-FTSMC and PSO-FTSMC methods.
