Optimal Positioning of Inertial Measurement Units in a Smart Shirt for Determining Respiratory Volume.

Tidal volume can be estimated using the surface motions of the upper body induced by respiration. However, the precision and instrumentation of such estimation must be improved to allow widespread application. In this study, respiration induced changes in parameters that can be recorded with inertial measurement units are examined to determine tidal volumes. Based on the data of an optical motion capture system, the optimal positions of inertial measurement units (IMU) in a smart shirt for sets of 4, 5 or 6 sensors were determined. The errors observed indicate the potential to determine tidal volumes using IMUs in a smart shirt.Clinical Relevance- The measurement of respiratory volumes via a low-cost and unobtrusive smart shirt would be a major advance in clinical diagnostics. In particular, conventional methods are expensive, and uncomfortable for conscious patients if measurement is desired over an extended period. A smart-shirt based on inertial sensors would allow a comfortable measurement and could be used in many clinical scenarios - from sleep apnoea monitoring to homecare and respiratory monitoring of comatose patients.

An alternative way to measure respiration induced changes of circumferences: a pilot study.

Various measurement systems can be used to obtain dynamic circumferences of the human upper body, but each of these systems has disadvantages. In this feasibility study we introduce a non-invasive and wearable thoracic belt to measure dynamic changes of circumferences of thorax or abdomen. To evaluate this approach, five subjects undertook various breaths of disparate tidal volumes, which were measured by the belt and simultaneously by a motion capture system which provided a reference metric.The results of the belt concurred with the reference system. A coefficient of determination (adjusted R2) of 0.99 and a mean squared error of less than 0.87 mm2 showed that the belt is capable of measuring changes accurately and a couple of respiratory parameters, such as the respiratory rate, can be obtained.Clinical Relevance-The introduced system links surface motions of the upper body with the underlying respiratory mechanics. Thus it provides some respiratory parameters without the disadvantages of a facemask or a mouthpiece. The system could allow the analysis of breathing status in some clinical applications and could be used for low-cost monitoring in homecare or to analyse respiratory parameters during sports.

Tidal volume via circumferences of the upper body: a pilot study.

The gold standard for tidal volume measurement is spirometry. Based on retrospective data, this study evaluates different geometric lung models in their ability to deliver accurate tidal volumes from changes in thoracic and abdominal circumference. The geometric lung models showed good coefficients of determination (adjusted R2 >0.97) compared to the tidal volumes measured by a body plethysmograph. Tidal volumes obtained by circumference changes might be used in surveillance systems to analyze respiration without a face mask.

Ventilation inhomogeneity in obstructive lung diseases measured by electrical impedance tomography: a simulation study.

Electrical impedance tomography (EIT) has mostly been used in the Intensive Care Unit (ICU) to monitor ventilation distribution but is also promising for the diagnosis in spontaneously breathing patients with obstructive lung diseases. Beside tomographic images, several numerical measures have been proposed to quantitatively assess the lung state. In this study two common measures, the 'Global Inhomogeneity Index' and the 'Coefficient of Variation' were compared regarding their capability to reflect the severity of lung obstruction. A three-dimensional simulation model was used to simulate obstructed lungs, whereby images were reconstructed on a two-dimensional domain. Simulations revealed that minor obstructions are not adequately recognized in the reconstructed images and that obstruction above and below the electrode plane may result in misleading values of inhomogeneity measures. EIT measurements on several electrode planes are necessary to apply these measures in patients with obstructive lung diseases in a promising manner.

Simultaneous application of two independent EIT devices for real-time multi-plane imaging.

Diagnosis and treatment of many lung diseases like cystic fibrosis (CF) or chronic obstructive pulmonary disease (COPD) could benefit from 3D ventilation information. Applying two EIT systems concurrently is a simple approach without specialized hardware that allows monitoring of regional changes of ventilation distribution inside the thorax at different planes with the high temporal resolution much valued in common single plane EIT. Effects of two simultaneously operated EIT devices on one subject were investigated to monitor rapid processes inside the thorax with a multi-plane approach. Results obtained by simulations with a virtual phantom and measurements with a phantom tank reveal that the distance of electrode planes has an important influence on the signal quality. Band-pass filters adapted according to the distance of the planes, can be used to reduce the crosstalk of the concurrent EIT systems. Besides simulations and phantom tank experiments measurements were also taken from a lung healthy volunteer to demonstrate the operation under realistic conditions. Reconstructed images indicate that it is possible to simultaneously visualize regional ventilation at different planes if settings of the EIT devices are chosen appropriately.

Compensation for large thorax excursions in EIT imaging.

Besides the application of EIT in the intensive care unit it has recently also been used in spontaneously breathing patients suffering from asthma bronchiole, cystic fibrosis (CF) or chronic obstructive pulmonary disease (COPD). In these cases large thorax excursions during deep inspiration, e.g. during lung function testing, lead to artifacts in the reconstructed images. In this paper we introduce a new approach to compensate for image artifacts resulting from excursion induced changes in boundary voltages. It is shown in a simulation study that boundary voltage change due to thorax excursion on a homogeneous model can be used to modify the measured voltages and thus reduce the impact of thorax excursion on the reconstructed images. The applicability of the method on human subjects is demonstrated utilizing a motion-tracking-system. The proposed technique leads to fewer artifacts in the reconstructed images and improves image quality without substantial increase in computational effort, making the approach suitable for real-time imaging of lung ventilation. This might help to establish EIT as a supplemental tool for lung function tests in spontaneously breathing patients to support clinicians in diagnosis and monitoring of disease progression.