Large-Area Integrated Triboelectric Sensor Array for Wireless Static and Dynamic Pressure Detection and Mapping.

Large-area flexible pressure sensors are of paramount importance for various future applications, such as electronic skin, human-machine interfacing, and health-monitoring devices. Here, a self-powered and large-area integrated triboelectric sensor array (ITSA) based on coupling a triboelectric sensor array and an array chip of CD4066 through a traditional connection is reported. Enabled by a simple and cost-effective fabrication process, the size of the ITSA can be scaled up to 38 × 38 cm2 . In addition, unlike previously proposed triboelectric sensors arrays, which can only react to the dynamic interaction, this ITSA is able to detect static and dynamic pressure. Moreover, through integrating the ITSA with a signal processing circuit, a complete wireless sensing system is present. Diverse applications of the system are demonstrated in detail, including detecting pressure, identifying position, tracking trajectory, and recognizing the profile of external contact objects. Thus, the ITSA in this work opens a new route in the direction of large-area, self-powered, and wireless triboelectric sensing systems.

Nanofiber-Reinforced Silver Nanowires Network as a Robust, Ultrathin, and Conformable Epidermal Electrode for Ambulatory Monitoring of Physiological Signals.

Extremely soft and thin electrodes with high skin conformability have potential applications in wearable devices for personal healthcare. Here, a submicrometer thick, highly robust, and conformable nanonetwork epidermal electrode (NEE) is reported. Electrospinning of polyamide nanofibers and electrospraying of silver nanowires are simultaneously performed to form a homogeneously convoluted network in a nonwoven way. For a 125 nm thick NEE, a low sheet resistance of ≈4 Ω sq-1 with an optical transmittance of ≈82% is achieved. Due to the nanofiber-based scaffold that undertakes most of the stress during deformation, the electric resistance of the NEE shows very little variation; less than 1.2% after 50 000 bending cycles. The NEE can form a fully conformal contact to human skin without additional adhesives, and the NEE shows a contact impedance that is over 50% lower than what is found in commercial gel electrodes. Due to conformal contact even under deformation, the NEE proves to be a stable, robust, and comfortable approach for measuring electrocardiogram signals, especially when a subject is in motion. These features make the NEE promising for use in the ambulatory measurement of physiological signals for healthcare applications.

Highly Robust, Transparent, and Breathable Epidermal Electrode.

Recently emerged electronic skins with applications in on-body sensing and human-machine interfaces call for the development of high-performance skin-like electrodes. In this work, we report a highly robust, transparent, and breathable epidermal electrode composed of a scaffold-reinforced conductive nanonetwork (SRCN). Solution-dispersed Ag nanowires, through facile vacuum filtration, are embedded into a scaffold made of polyamide nanofibers. Optical transmittance of 84.9% at 550 nm wavelength is achieved at a significantly low sheet resistance of 8.2 Ω sq-1. The resistance of the SRCN only slightly increases by less than 0.1% after being bent for 3000 cycles at the maximum curvature of 300 m-1 and by less than 1.5% after being dipped in saline solution for 2500 cycles. The excellent robustness is attributed to the reinforcement from the nanofiber-based scaffold as a backbone that maintains the connections among the Ag nanowires by undertaking most of the loaded stress. The SRCN not only forms tight and conformal bonding with the target surface but also allows the evaporation of perspiration, making it suitable as an epidermal electrode for long-time use. Furthermore, fine and clean-cut circuit patterns with a line width on the micrometer scale can be readily prepared, paving the way for fabricating sophisticated functional electronic skins.

In Situ Active Poling of Nanofiber Networks for Gigantically Enhanced Particulate Filtration.

Enhancing the filtration efficiency of air filtering material without increasing its airflow resistance is a major challenge and of great significance. In this work, we report a type of active-poled nanofiber onto which in situ active poling is applied. It results in significantly enhanced filtration efficiency as well as dust holding capacity while keeping the airflow resistance constant. Owing to the in situ applied electric field, the nanofibers as well as the particulates are polarized. As a result, at a poling voltage of 2 kV, the removal efficiency and the quality factor for PM2.5 are enhanced by 17% and 130%, respectively. More importantly, the dust holding capacity represents a 3.5-fold enhancement over normal nanofibers. The approach reported in this work has the potential of being practically utilized in air purification purposes because it can bring about not only promoted filtration performance but also lowered noise and reduced power consumption.

Triboelectrification-Enabled Self-Powered Data Storage.

Data storage by any means usually requires an electric driving power for writing or reading. A novel approach for self-powered, triboelectrification-enabled data storage (TEDS) is presented. Data are incorporated into a set of metal-based surface patterns. As a probe slides across the patterned surface, triboelectrification between the scanning probe and the patterns produces alternatively varying voltage signal in quasi-square wave. The trough and crest of the quasi-square wave signal are coded as binary bits of "0" and "1," respectively, while the time span of the trough and the crest is associated with the number of bits. The storage of letters and sentences is demonstrated through either square-shaped or disc-shaped surface patterns. Based on experimental data and numerical calculation, the theoretically predicted maximum data storage density could reach as high as 38.2 Gbit in-2. Demonstration of real-time data retrieval is realized with the assistance of software interface. For the TEDS reported in this work, the measured voltage signal is self-generated as a result of triboelectrification without the reliance on an external power source. This feature brings about not only low power consumption but also a much more simplified structure. Therefore, this work paves a new path to a unique approach of high-density data storage that may have widespread applications.

Highly Adaptive Solid-Liquid Interfacing Triboelectric Nanogenerator for Harvesting Diverse Water Wave Energy.

Harvesting water wave energy presents a significantly practical route to energy supply for self-powered wireless sensing networks. Here we report a networked integrated triboelectric nanogenerator (NI-TENG) as a highly adaptive means of harvesting energy from interfacing interactions with various types of water waves. Having an arrayed networking structure, the NI-TENG can accommodate diverse water wave motions and generate stable electric output regardless of how random the water wave is. Nanoscaled surface morphology consisting of dense nanowire arrays is the key for obtaining high electric output. A NI-TENG having an area of 100 × 70 mm2 can produce a stable short-circuit current of 13.5 µA and corresponding electric power of 1.03 mW at a water wave height of 12 cm. This merit promises practical applications of the NI-TENG in real circumstances, where water waves are highly variable and unpredictable. After energy storage, the generated electric energy can drive wireless sensing by autonomously transmitting data at a period less than 1 min. This work proposes a viable solution for powering individual standalone nodes in a wireless sensor network. Potential applications include but are not limited to long-term environment monitoring, marine surveillance, and off-shore navigation.

Triboelectrification-Induced Self-Assembly of Macro-Sized Polymer Beads on a Nanostructured Surface for Self-Powered Patterning.

Here we report an electrostatic-templated self-assembly (ETSA) method for arbitrarily patterning millimeter-sized polymer beads on a nanostructured surface without using an extra voltage source. A patterned electrode underneath an electrification layer generates "potential wells" of the corresponding pattern at predefined window sites, which capture and anchor the beads within the window sites by electrostatic force. Analytical calculation is combined with numerical modeling to derive the electrostatic force acting on the beads, which is in great agreement with experimentally measured values. The generated pattern is solely determined by the predefined underlying electrode, making it arbitrarily switchable by using different electrode patterns. By transferring the assembled beads into an elastomer matrix, possible applications of the ETSA in fabricating optical and flexible displays are demonstrated.

Stretchable Porous Carbon Nanotube-Elastomer Hybrid Nanocomposite for Harvesting Mechanical Energy.

A stretchable porous nanocomposite (PNC) is reported based on a hybrid of a multiwalled carbon nanotubes network and a poly(dimethylsiloxane) matrix for harvesting energy from mechanical interactions. The deformation-enabled energy-generating process makes the PNC applicable to various mechanical interactions, including pressing, stretching, bending, and twisting. It can be potentially used as an energy solution for wearable electronics.

Dynamic Triboelectrification-Induced Electroluminescence and its Use in Visualized Sensing.

Triboelectrification-induced electroluminescence converts dynamic motion into light emission. Tribocharges resulting from the relative mechanical interactions between two dissimilar materials can abruptly and significantly alter the surrounding electric potential, exciting the electroluminescence of phosphor along the motion trajectory. The position, trajectory, and contour profile of a moving object can be visualized in high resolution, demonstrating applications in sensing.

Interface-Free Area-Scalable Self-Powered Electroluminescent System Driven by Triboelectric Generator.

Self-powered system that is interface-free is greatly desired for area-scalable application. Here we report a self-powered electroluminescent system that consists of a triboelectric generator (TEG) and a thin-film electroluminescent (TFEL) lamp. The TEG provides high-voltage alternating electric output, which fits in well with the needs of the TFEL lamp. Induced charges pumped onto the lamp by the TEG generate an electric field that is sufficient to excite luminescence without an electrical interface circuit. Through rational serial connection of multiple TFEL lamps, effective and area-scalable luminescence is realized. It is demonstrated that multiple types of TEGs are applicable to the self-powered system, indicating that the system can make use of diverse mechanical sources and thus has potentially broad applications in illumination, display, entertainment, indication, surveillance and many others.